Microstructure and wear performance of Al20Cr5Fe50Mn20Ti5 medium-entropy alloy coating deposited by laser cladding
Source abstract
Abstract
Al 20Cr 5Fe 50Mn 20Ti 5 medium-entropy alloy (MEA) coatings with different preparation process parameters were successfully fabricated by laser cladding (LC) on Inconel 718 Ni-alloy substrate. Comparison of two coatings with optimal macroscopic morphology, and the phase, micro-structure and hardness were characterized using SEM, XRD, and EBSD. The thermal stability performance of the two MEA coatings was systematically analyzed by combining phase diagram calculation and experimental tests. Compared to the substrate, the frictional wear properties of the MEA coatings at 400 °C, 600 °C and 800 °C were systematically analyzed. The results show that Al 20Cr 5Fe 50Mn 20Ti 5 MEA coatings with two different parameters formed a good metallurgical bond with the substrate, contained BCC, FCC and Ti-rich phases, and both had a good thermal stability at the range of room temperature to 1000 °C. The refinement of grain size and the enhancement of dislocation density improved Al 20Cr 5Fe 50Mn 20Ti 5 MEA coatings wear properties. The generation of Ti-rich phase enhanced the wear performance, while excessive fusion of Ti elements into the coating caused oxidation at high temperatures to generate brittle phases, which reduced wear performance and led to coating failure. Through this study, new designed MEA system with low cost advantage can be applied in high temperature environment.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Research progress of blade tip coating for aero-engine
2. Multiscale mechanical performance and corrosion behaviour of plasma sprayed AlCoCrFeNi high-entropy alloy coatings10.1016/j.jallcom.2020.157140 ↗
3. Influence of NbC particles on microstructure and mechanical properties of AlCoCrFeNi high-entropy alloy coatings prepared by laser cladding10.1016/j.jallcom.2019.02.223 ↗
4. High temperature oxidation resistance of W-containing high entropy alloys
5. Synthesis and microstructure characterization of Ni-Cr-Co-Ti-V-Al high entropy alloy coating on Ti-6Al-4V substrate by laser surface alloying10.1016/j.matchar.2016.09.011 ↗
6. Microhardness wear resistance, and corrosion resistance of AlxCrFeCoNiCu high-entropy alloy coatings on aluminum by laser cladding10.1016/j.optlastec.2020.106632 ↗
7. Plasma-sprayed high entropy alloys: microstructure and properties of AlCoCrFeNi and MnCoCrFeNi10.1007/s11661-014-2644-z ↗
8. Accelerated emergence of CoNi-based medium-entropy alloys with emphasis on their mechanical properties10.1016/j.cossms.2022.101032 ↗
9. Thermal sprayed high-entropy NiCo0.6Fe0.2Cr1.5 SiAlTi0.2 coating with improved mechanical properties and oxidation resistance10.1016/j.intermet.2017.05.015 ↗
10. Mechanical and high-temperature corrosion properties of AlTiCrNiTa high entropy alloy coating prepared by magnetron sputtering for accident-tolerant fuel cladding10.1016/j.surfcoat.2021.127228 ↗
11. Thermal spray high-entropy alloy coatings: a review10.1007/s11666-020-01047-0 ↗
12. Structure and high temperature wear characteristics of CVD coating on HEA-bonded cermet10.1016/j.ceramint.2019.06.152 ↗
13. Microstructural, electrochemical and wear-corrosion characterization of TC4-5Cu alloy fabricated by selective laser melting10.1016/j.jallcom.2021.159953 ↗
14. Microstructure and high temperature properties of laser cladded WTaNbMo refractory high entropy alloy coating assisted with ultrasound vibration10.1016/j.jallcom.2022.165888 ↗
15. Effect of c-BN on the microstructure and high temperature wear resistance of laser cladded Ni-based composite coating10.1016/j.surfcoat.2021.127466 ↗
16. Effects of Fe-to-Co ratio on micro-structure and mechanical properties of laser cladded FeCoCrB-NiSi high-entropy alloy coatings10.1016/j.apsusc.2018.03.128 ↗
17. Microstructure and properties of 6FeNiCoSiCrAlTi high-entropy alloy coating pre-pared by laser cladding10.1016/j.apsusc.2010.09.084 ↗
18. Analysis of laser cladding process parameter influence on the clad bead geometry10.1007/s40194-017-0495-0 ↗
19. Effect of the scanning speed on microstructural evolution and wear behaviors of laser cladding NiCrBSi composite coatings10.1016/j.optlastec.2015.03.015 ↗
20. M.H. Nie, S. Zhang, Z.Y. Wang, et al., Effect of laser power on microstructure and interfacial bonding strength of laser cladding 17-4PH stainless steel coatings, vol. 275, 2022, p. 125236.10.1016/j.matchemphys.2021.125236 ↗
21. Laser surface alloying of FeCoCrAlNi high-entropy alloy on 304 stainless steel to enhance corrosion and cavitation erosion resistance10.1016/j.optlastec.2016.04.011 ↗
22. Critical state of laser cladding with powder auto-feeding10.1016/0257-8972(95)02452-2 ↗
23. Mechanics and energy analysis on molten pool spreading during laser solid forming10.1016/j.apsusc.2010.02.060 ↗
24. Surface rippling induced by surface tension gradients during laser surface melting and alloying10.1063/1.324260 ↗
25. The evolution of bainite and mechanical properties of direct laser deposition 12CrNi2 alloy steel at different laser power10.1016/j.msea.2018.10.092 ↗
26. Effect of process parameters on the microstructure and properties of laser-clad FeNiCoCrTi0.5 high-entropy alloy coating10.1007/s12613-019-1958-7 ↗
27. A strong and ductile NiCoCr-based medium-entropy alloy strengthened by coherent nanoparticles with superb thermal-stability10.1016/j.jmst.2022.06.012 ↗
28. Hume-rothery rules for structurally complex alloy phases10.1557/mrs.2012.45 ↗
29. Modified criterions for phase prediction in the multi-component laser-clad coatings and investigations into microstructural evolution/wear resistance of FeCrCoNiAlMox laser-clad coatings10.1016/j.apsusc.2018.08.264 ↗
30. Phase stability in high entropy alloys: formation of solid-solution phase or amorphous phase10.1016/S1002-0071(12)60080-X ↗
31. Effect of processing parameters on microstructure and tensile properties of austenitic stainless steel 304L made by directed energy deposition additive manufacturing10.1016/j.actamat.2016.03.019 ↗
32. Effects of process time interval and heat treatment on the mechanical and microstructural properties of direct laser deposited 316L stainless steel10.1016/j.msea.2015.07.056 ↗
33. The effect of different scanning strategies on microstructural evolution to 24CrNiMo alloy steel during direct laser deposition10.1016/j.msea.2019.138557 ↗
34. Fracture and wear mechanisms of FeMnCrNiCo + x(TiC) composite high-entropy alloy cladding layers10.1016/j.apsusc.2020.148794 ↗
35. Hume-rothery for HEA classification and selforganizing map for phases and properties prediction10.1016/j.jallcom.2017.07.074 ↗
36. Deformation behaviors and cyclic strength assessment of AZ31B magnesium alloy based on steady ratcheting effect10.1016/j.msea.2018.03.023 ↗
37. Deformation localization and dislocation channel dynamics in neutron-irradiated austenitic stainless steels10.1016/j.jnucmat.2015.02.008 ↗
38. Effect of processing parameters on microstructure and tensile properties of austenitic stainless steel 304L made by directed energy deposition additive manufacturing10.1016/j.actamat.2016.03.019 ↗
39. Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology10.1557/jmr.2004.19.1.3 ↗
40. Investigating the elastic modulus and hardness properties of a high entropy alloy coating using nanoindentation
41. Strengthening mechanism in two-phase FeCoCrNiMnAl high entropy alloy coating10.1016/j.apsusc.2020.147205 ↗
42. Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology10.1557/jmr.2004.19.1.3 ↗
43. Selective laser melted CrMnFeCoNi + 3 wt% Y2O3 high-entropy alloy matrix nanocomposite: fabrication, microstructure and nanoindentation properties10.1016/j.intermet.2021.107319 ↗
44. Voronoi cell: new method for allocation of space among atoms: elimination of avoidable errors in calculation of atomic volume and density10.1002/(SICI)1096-987X(19970715)18:9<1113::AID-JCC1>3.0.CO;2-U ↗