Plastic deformation mechanism and defect patterning under nanoindentation in medium entropy alloy CoCrNi
Source abstract
Abstract
In this work, molecular dynamics simulations are employed to study the mechanical response and plastic deformation evolution of single-crystal medium entropy alloy (MEA) CoCrNi under nanoindentation. The effects of lattice distortion (LD) and chemical short-range order (CSRO) on plasticity initiation and defect evolution including the patterning of dislocations, planar faults and prismatic dislocation loops (PDLs) are discussed with respect to anisotropy. The results show that CSRO increases Young’s modulus and critical nucleation stress of Shockley partial (SP), while LD and thermal vibration have the opposite effect. In MEAs, a preference of SP nucleation at CoCr clusters is observed, and the SP bundles develop into a compact plastic zone with dense dislocation networks due to frequent dislocation interactions and large slip resistance by LD and CSRO. Twin boundaries (TBs) and geometrically necessary dislocations (GNDs) play the dominant role in the accommodation of local plasticity, while the propagation of PDLs, dependent on the slip propensity of loading orientation and the degree of slip resistance, assist in the relief of local stress. Once the PDL nucleation is suppressed, dislocation pileup is triggered by dense dislocation networks with limited dislocation propagation tendency, leading to a higher strength of the material. The above results elaborate the relation between local plasticity and defect patterning, which sheds light on the design of MPEAs with heterogeneous deformation behavior.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (88)
Show source-provided references
1. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
2. Nanostructured high-entropy alloys with multiple principal elements: Novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
3. Microstructures and properties of high-entropy alloys10.1016/j.pmatsci.2013.10.001 ↗
4. High-entropy alloy: challenges and prospects10.1016/j.mattod.2015.11.026 ↗
5. High-entropy alloys: a critical assessment of their founding principles and future prospects10.1080/09506608.2016.1180020 ↗
6. Fundamental deformation behavior in high-entropy alloys: an overview10.1016/j.cossms.2017.08.003 ↗
7. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
8. High entropy alloys: a focused review of mechanical properties and deformation mechanisms10.1016/j.actamat.2019.12.015 ↗
9. Multicomponent and high entropy alloys10.3390/e16094749 ↗
10. Mechanical properties of high-entropy alloys with emphasis on face-centered cubic alloys10.1016/j.pmatsci.2018.12.003 ↗
11. A fracture-resistant high-entropy alloy for cryogenic applications10.1126/science.1254581 ↗
12. Exceptional damage-tolerance of a medium-entropy alloy CrCoNi at cryogenic temperatures10.1038/ncomms10602 ↗
13. Dislocation mechanisms and 3D twin architectures generate exceptional strength-ductility-toughness combination in CrCoNi medium-entropy alloy10.1038/ncomms14390 ↗
14. Superior strength-ductility CoCrNi medium-entropy alloy wire10.1016/j.scriptamat.2020.02.002 ↗
15. On the mechanical response and microstructure evolution of NiCoCr single crystalline medium entropy alloys10.1080/21663831.2018.1478331 ↗
16. Deformation-induced grain boundary segregation mediated high-strain rate superplasticity in medium entropy alloy10.1016/j.scriptamat.2021.114239 ↗
17. Real-time nanoscale observation of deformation mechanisms in CrCoNi-based medium- to high-entropy alloys at cryogenic temperatures10.1016/j.mattod.2019.03.001 ↗
18. Unusual dislocation behavior in high-entropy alloys10.1016/j.scriptamat.2020.02.021 ↗
19. Design using randomness: a new dimension for metallurgy10.1016/j.scriptamat.2020.06.012 ↗
20. Influence of deformation induced nanoscale twinning and FCC-HCP transformation on hardening and texture development in medium-entropy CrCoNi alloy10.1016/j.actamat.2018.07.028 ↗
21. Shape-preserving machining produces gradient nanolaminate medium entropy alloys with high strain hardening capability10.1016/j.actamat.2019.03.024 ↗
22. Reasons for the superior mechanical properties of medium-entropy CrCoNi compared to high-entropy CrMnFeCoNi10.1016/j.actamat.2017.02.036 ↗
23. The evolution of the deformation substructure in a Ni-Co-Cr equiatomic solid solution alloy10.1016/j.actamat.2017.04.033 ↗
24. Heterogeneous precipitation behavior and stacking-fault-mediated deformation in a CoCrNi-based medium-entropy alloy10.1016/j.actamat.2017.07.029 ↗
25. Cooperative deformation in high-entropy alloys at ultralow temperatures10.1126/sciadv.aax4002 ↗
26. Role of local chemical fluctuations in the shock dynamics of medium entropy alloy CoCrNi10.1016/j.actamat.2021.117380 ↗
27. Dynamic shear deformation of a CrCoNi medium-entropy alloy with heterogeneous grain structures10.1016/j.actamat.2018.02.016 ↗
28. Microstructure and nanoindentation creep behavior of CoCrFeMnNi high-entropy alloy fabricated by selective laser melting
29. Annealing effect on plastic flow in nanocrystalline CoCrFeMnNi high-entropy alloy: a nanomechanical analysis10.1016/j.actamat.2017.08.057 ↗
30. Nanoscale serration and creep characteristics of Al0.5CoCrCuFeNi high-entropy alloys10.1016/j.jallcom.2018.04.137 ↗
31. Understanding imprint formation, plastic instabilities and hardness evolutions in FCC, BCC and HCP metal surfaces10.1016/j.actamat.2021.117122 ↗
32. A novel approach to study dislocation density tensors and lattice rotation patterns in atomistic simulations10.1016/j.jmps.2011.12.005 ↗
33. Investigation of the indentation size effect through the measurement of the geometrically necessary dislocations beneath small indents of different depths using EBSD tomography10.1016/j.actamat.2008.09.039 ↗
34. Short-range order and its impact on the CrCoNi medium-entropy alloy10.1038/s41586-020-2275-z ↗
35. Chemical short-range order strengthening mechanism in CoCrNi medium-entropy alloy under nanoindentation10.1016/j.scriptamat.2021.114364 ↗
36. Local structure and short-range order in a NiCoCr solid solution alloy10.1103/PhysRevLett.118.205501 ↗
37. Enhanced strength and ductility in a high-entropy alloy via ordered oxygen complexes10.1038/s41586-018-0685-y ↗
38. Direct observation of chemical short-range order in a medium-entropy alloy10.1038/s41586-021-03428-z ↗
39. Tunable stacking fault energies by tailoring local chemical order in CrCoNi medium-entropy alloys10.1073/pnas.1808660115 ↗
40. Effects of lattice distortion and chemical short-range order on the mechanisms of deformation in medium entropy alloy CoCrNi10.1016/j.actamat.2020.08.044 ↗
41. Phase transition in medium entropy alloy cocrni under quasi-isentropic compression10.1016/j.ijplas.2022.103389 ↗
42. Effects of lattice distortion and chemical short-range order on creep behavior of medium-entropy alloy cocrni10.1016/j.mechmat.2022.104549 ↗
43. Atomistic insights into the deformation mechanism of a CoCrNi medium entropy alloy under nanoindentation10.1016/j.ijplas.2021.102997 ↗
44. Effect of crystallographic orientation on mechanical properties of single-crystal CoCrFeMnNi high-entropy alloy10.1016/j.msea.2021.141196 ↗
45. Fast parallel algorithms for short-range molecular dynamics10.1006/jcph.1995.1039 ↗
46. Strengthening in multi-principal element alloys with local-chemical-order roughened dislocation pathways10.1038/s41467-019-11464-7 ↗
47. Novel atomic-scale mechanism of incipient plasticity in a chemically complex CrCoNi medium-entropy alloy associated with inhomogeneity in local chemical environment10.1016/j.actamat.2020.05.042 ↗
48. Maximum strength and dislocation patterning in multi–principal element alloys10.1126/sciadv.abq7433 ↗
49. Atomistic simulation of tantalum nanoindentation: effects of indenter diameter, penetration velocity, and interatomic potentials on defect mechanisms and evolution10.1016/j.msea.2014.07.001 ↗
50. An approximate theory of order in alloys10.1103/PhysRev.77.669 ↗
51. The number of independent pair-correlation functions in multicomponent systems10.1107/S0021889871006174 ↗
52. A first-principles measure for the twinnability of FCC metals10.1016/j.jmps.2004.05.002 ↗
53. criterion for the onset of deformation twinning at a crack tip10.1016/S0022-5096(03)00005-X ↗
54. Dislocation nucleation from a crack tip: an analysis based on the Peierls concept10.1016/S0022-5096(05)80012-2 ↗
55. Spherical nanoindentation stress–strain curves10.1016/j.mser.2015.02.001 ↗
56. Atomistic insights into the prismatic dislocation loop on Al (1 0 0) during nanoindentation investigated by molecular dynamics10.1016/j.commatsci.2017.11.031 ↗
57. Atomic-scale analysis of nanoindentation behavior of high-entropy alloy10.1142/S2424913016500016 ↗
58. Molecular dynamics modeling of nanoindentation
59. Automated identification and indexing of dislocations in crystal interfaces10.1088/0965-0393/20/8/085007 ↗
60. Visualization and analysis of atomistic simulation data with OVITO–the Open Visualization Tool10.1088/0965-0393/18/1/015012 ↗
61. Computational analysis methods in atomistic modeling of crystals10.1007/s11837-013-0827-5 ↗
62. Atomistic processes of dislocation generation and plastic deformation during nanoindentation10.1016/j.actamat.2010.10.016 ↗
63. Effect of solid solution elements on nanoindentation hardness, rate dependence, and incipient plasticity in fine grained magnesium alloys10.1016/j.actamat.2011.08.047 ↗
64. Unveiling the grain boundary-related effects on the incipient plasticity and dislocation behavior in nanocrystalline CrCoNi medium-entropy alloy10.1016/j.jmst.2022.02.041 ↗
65. The principles of mechanics (Slovak translation of H.R. Hertzas with annotations and introduction)
66. Thermal activation mechanisms and Labusch-type strengthening analysis for a family of high-entropy and equiatomic solid-solution alloys10.1016/j.actamat.2016.08.047 ↗
67. Activation volume and energy for dislocation nucleation in multi-principal element alloys10.3390/met9020263 ↗
68. Friction stress and Hall-Petch relationship in CoCrNi equi-atomic medium entropy alloy processed by severe plastic deformation and subsequent annealing10.1016/j.scriptamat.2017.02.042 ↗
69. Effect of elemental combination on friction stress and Hall-Petch relationship in face-centered cubic high / medium entropy alloys10.1016/j.actamat.2019.04.017 ↗
70. Uber die verfestigung von aluminium einkristallen (99,99% Al) und ihre deutung10.1016/0001-6160(59)90166-X ↗
71. Cell structures in copper single crystals deformed in the [001] and [111] axes10.1016/0036-9748(80)90091-5 ↗
72. Multislip tests on copper crystals: a junctions hardening effect10.1016/0001-6160(82)90135-3 ↗
73. Microstructure and flow stress of polycrystals and single crystals10.1016/S1359-6454(97)00365-0 ↗
74. The effect of twinning and slip on the bauschinger effect of hadfield steel single crystals10.1007/s11661-001-1005-x ↗
75. Entropic effect on the rate of dislocation nucleation10.1073/pnas.1017171108 ↗
76. The correlation of the indentation size effect measured with indenters of various shapes10.1016/S0022-5096(01)00103-X ↗
77. The effect of the indenter load on the nanohardness of ductile metals: an experimental study on polycrystalline work-hardened and annealed oxygen-free copper
78. Plasticity size effects in nanoindentation10.1557/jmr.2004.19.1.137 ↗
79. Indentation size effects in crystalline materials: a law for strain gradient plasticity10.1016/S0022-5096(97)00086-0 ↗
80. Micro-and nanoindentation techniques for mechanical characterisation of materials10.1179/174328006X102475 ↗
81. Growth twins and deformation twins in metals10.1146/annurev-matsci-070813-113304 ↗
82. Deformation twinning in nanocrystalline materials10.1016/j.pmatsci.2011.05.001 ↗
83. Shockley partial dislocations to twin: another formation mechanism and generic driving force10.1063/1.1835549 ↗
84. Geometrically necessary dislocation and size-dependent plasticity10.1016/S1359-6462(02)00329-9 ↗
85. Mechanical properties of micro-sized copper bending beams machined by the focused ion beam technique10.1016/j.actamat.2005.05.036 ↗
86. Microstructural evolution and observed stress response during hot deformation of 5005 and 6022 Al alloys10.1016/j.msea.2006.03.059 ↗
87. Geometrically necessary dislocations and strain-gradient plasticity: a few critical issues10.1016/S1359-6462(02)00335-4 ↗
88. Atomistic understanding of incipient plasticity in BCC refractory high entropy alloys10.1016/j.jallcom.2022.166058 ↗