A comprehensive review on the carbide-base coatings produced by thermo-reactive diffusion: microstructure and properties viewpoints
Source abstract
Abstract
Carbide coatings provide high resistance to wear and corrosion for their substrates, so they have recently received much attention from an industrial point of view. One of the successful methods in creating industrial carbide coatings is the thermo-reactive diffusion (TRD) method. In this review, chromium, vanadium and niobium carbide coatings produced by TRD method were investigated in two ways; single and double coatings. A number of studies on carbide coatings that have been performed since 2000 were collected in this paper and investigated based on the two perspectives of microstructure and surface properties of the coating. Satisfactory data were collected from the research on the input parameters of the coating process and the output results of the coatings, which can be used for industrial applications and future scientific research. Additionally, different coatings were analyzed and compared based on their microstructures, and the relation between different microstructures and coating properties are stated in detail. Also, a future trend for the research in the field of coatings produced by TRD method was suggested.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced materials and composites · Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Preparation and property of chromium carbide thermal diffusion coating on cold working die materials10.1007/s11595-010-0051-x ↗
2. Die wear in stamping of advanced high strength steels - investigations on the effects of substrate material and hard-coatings10.1016/j.triboint.2012.02.016 ↗
3. On the formation and properties of chromium carbide and vanadium carbide coatings produced on W1 tool steel through thermal reactive diffusion (TRD)10.1016/j.ceramint.2020.06.326 ↗
4. Characterization on multi-layer fabricated by TRD and plasma nitriding10.1016/j.matchemphys.2004.10.008 ↗
5. Cr(N,C) diffusion coating formation on pre-nitrocarburised H13 tool steel10.1016/S0257-8972(03)00791-6 ↗
6. Fluidized bed CrN coating formation on prenitrocarburized plain carbon steel10.1361/10599490419982 ↗
7. Oxidation kinetics of chromium carbide coating produced on AISI 1040 steel by thermo-reactive deposition method during high temperature in air10.4028/www.scientific.net/AMR.445.649 ↗
8. Sliding wear behavior of niobium carbide coated AISI 1040 steel10.1016/j.wear.2007.03.006 ↗
9. Khoie, An electrochemical study of the corrosion resistance of boride coating obtained by thermo-reactive diffusion10.1016/j.matchemphys.2010.08.047 ↗
10. Adhesion behavior in sliding test of austenitic stainless steel on VC coated by TRD process
11. Effects of technological conditions and substrate material on TD coatings10.4028/www.scientific.net/AMM.590.271 ↗
12. The kinetics and mechanism of multi-component diffusion on AISI 1045 steel10.1016/S0257-8972(99)00179-6 ↗
13. High temperature wear and friction properties of duplex surface treated bearing steels10.1016/j.surfcoat.2007.12.015 ↗
14. Chromizing of plasma nitrided AISI 1045 steel10.1016/j.tsf.2011.04.055 ↗
15. Duplex surface treatment of AISI 1045 steel via plasma nitriding of chromized layer10.1016/j.tsf.2011.04.054 ↗
16. Chromium carbonitride coating produced on DIN 1.2210 steel by thermo-reactive deposition technique: thermodynamics, kinetics and modeling, Surf10.1016/j.surfcoat.2013.02.030 ↗
17. Modeling layer thickness of duplex ceramic (chromium carbonitride) coating on cold work tool steel using fuzzy logic
18. Duplex ceramic coating produced by low temperature thermo-reactive deposition and diffusion on the cold work tool steel substrate: thermodynamics, kinetics and modeling10.1016/j.ceramint.2015.03.306 ↗
19. Effect of plasma nitriding on nanostructure of TRD coating10.1179/1743294415Y.0000000094 ↗
20. The thermo-reactive deposition and diffusion process for coating steels to improve wear resistance10.1533/9780857096524.5.703 ↗
21. Formation of chromium nitride layers on AISI 1010 steel by nitro-chromizing treatment10.1016/j.vacuum.2006.07.002 ↗
22. The effect of boronizing and boro-chromizing on tribological performance of AISI 52100 bearing steels10.1108/00368790910953668 ↗
23. Structural properties and kinetics of nitro-niobized steels10.1007/s10853-011-5758-3 ↗
24. Microstructural behavior of nitriding compound layer for Nb-carbonitride coating grown by thermo-reactive diffusion process10.1007/s12540-016-6014-9 ↗
25. Properties and tribological performance of ceramic-base chromium and vanadium carbide composite coatings10.1016/j.ijrmhm.2019.03.019 ↗
26. Characteristics and high temperature wear behavior of chrome vanadium carbide composite coatings produced by thermo-reactive diffusion10.1016/j.surfcoat.2020.126402 ↗
27. Effect of FeCr/FeV ratio during thermo-reactive deposition(TRD) process on mechanical properties and characteristics of carbide layer of Suj2 steel10.1016/j.matpr.2019.06.205 ↗
28. Growth characteristics and kinetics of niobium carbide coating obtained on AISI 52100 by thermal-reactive diffusion techniqueitle10.1007/s11595-014-1001-9 ↗
29. Computer-aided modeling for predicting layer thickness of a duplex treated ceramic coating on tool steels10.1016/j.ceramint.2013.10.141 ↗
30. Artificial neural network to predict the effects of coating parameters on layer thickness of chromium carbonitride coating on pre-nitrided steels10.1007/s00521-012-0994-2 ↗
31. Electrical furnace for producing carbide coatings using the thermoreactive deposition/diffusion technique
32. Kinetics of V(N,C) and Nb(N,C) coatings produced by V-Nb-RE deposition technique10.1016/j.surfcoat.2012.04.057 ↗
33. A model of vanadium carbide growth on steel surfaces obtained by thermo reactive deposition10.1007/s11837-013-0763-4 ↗
34. Adherent HFCVD diamond on steels substrates using vanadium carbide intermediate layer10.1016/j.diamond.2018.09.013 ↗
35. Characterization of vanadium carbide coating deposited by borax salt bath process10.12989/amr.2012.1.3.233 ↗
36. Characterization of VC coatings on cold work tool steel produced by TRD
37. Composition variation of borax salt during the process of vanadizing by thermal diffusion10.1007/s11595-012-0472-9 ↗
38. Corrosiveness of palm biodiesel in gray cast iron coated by thermoreactive diffusion vanadium carbide (VC) coating10.3390/coatings9020135 ↗
39. Effect of V addition on the hardness, adherence and friction coefficient of VC coatings produced by thermo-reactive diffusion deposition10.15446/dyna.v82n194.49243 ↗
40. Effects of rare earths in borax salt bath immersion vanadium carbide coating process on steel substrate10.1016/j.surfcoat.2008.04.068 ↗
41. Evaluation of hard coatings obtained on AISI D2 steel by thermo-reactive deposition treatment10.1016/j.surfcoat.2006.03.036 ↗
42. Evaluation of vanadium carbide coatings on AISI H13 obtained by thermo-reactive deposition/diffusion technique10.1016/j.surfcoat.2010.07.065 ↗
43. Failure mechanism and improvement process of preparing carbide coating on high speed steel by thermal diffusion reaction10.1016/j.surfcoat.2020.126398 ↗
44. Growth kinetics and wear resistance of vanadium carbide on AISI D2 steel produced by TRD process10.1088/2053-1591/abe73e ↗
45. Kinetics of vanadium carbide coating produced on AISI D2 steel by thermoreactive diffusion technique10.1134/S1070427214120222 ↗
46. Tribological behavior of austenitic stainless steel and vanadium carbide coated by TRD process
47. Florez, Vanadium carbide coatings produced on gray cast iron using the thermo-reactive deposition/diffusion technique
48. Wear behaviour of TRD carbide coatings at elevated temperatures10.1108/00368791011012452 ↗
49. Friction and wear properties of thermo-reactive diffusion coatings against titanium nitride coated steels10.1016/j.matdes.2004.05.010 ↗
50. Microabrasion wear behavior of VC and CrC coatings deposited by thermoreactive diffusion technique10.1080/10402004.2014.880538 ↗
51. A comparative study on tribocorrosion wear behavior of boride and vanadium carbide coatings produced by TRD on AISI D2 Steel10.1134/S2070205122030042 ↗
52. Effect of fev residual powders as an innovation of thermo reactive deposition process (trd) with material balance method to carbide surface characteristics on suj2 tool steel10.1088/1757-899X/553/1/012018 ↗
53. Investigation of microstructure and properties of vanadium carbide coatings deposited on AISI 52100 (ShKh15) steel by thermo-reactive diffusion10.1007/s11041-020-00492-6 ↗
54. Vanadium carbide coatings on die steel deposited by the thermo-reactive diffusion technique10.1016/j.jpcs.2008.04.040 ↗
55. Thermo-reactive deposition processed vanadium carbide coating: Growth kinetics model and diffusion mechanism10.1016/j.surfcoat.2012.08.010 ↗
56. Study on kinetics of carbide coating growth by thermal diffusion process10.1016/j.surfcoat.2006.04.028 ↗
57. The microstructure evolution of VC coatings on AISI H13 and 9Cr18 steel by thermo-reactive deposition process10.1016/j.jallcom.2010.06.064 ↗
58. Improvements in thermoreactive deposition of carbide layers10.1007/BF03165183 ↗
59. Vanadium carbide coating growth on die steel substrate in borax salt bath
60. Comparative tribological behavior of V(N, C) and VC diffusion coatings10.4028/www.scientific.net/DDF.297-301.1183 ↗
61. Novelty in diffusion coating technology10.1080/10426910902917710 ↗
62. The surface morphologies and spectroscopy analysis of VC coatings on the substrate of Cr12MoV prepared by TD process after salt spray10.1007/s11595-012-0517-0 ↗
63. Influence of chromium carbide coating on tribological performance of steel10.1016/j.matdes.2004.10.005 ↗
64. Effect of carbon presence in the substrate and salt bath on the formation of chromium coating layers on steel through TRD process
65. Effect of salt bath composition on the chromium diffusion on plain carbon steels by TRD process10.4028/www.scientific.net/DDF.326-328.377 ↗
66. Chromium carbide coatings produced on ductile cast iron QT600-3 by thermal reactive diffusion in fluoride salt bath: Growth behavior, microstructure evolution and kinetics10.1016/j.ceramint.2018.09.304 ↗
67. Comparison of the activation energies of the formation of Chromium carbide coating on carburized and uncarburized AISI 1020 steel
68. Formation of chromium carbide coatings on HT250 steel by thermal diffusion processes in fluoride molten salt bath10.1016/j.vacuum.2018.06.015 ↗
69. Microstructural evolution and wear properties of chromium carbide coating formed by thermo-reactive diffusion (TRD) process on a cold-work tool steel
70. Segregation of molten salt on chromizing in thermal diffusion process10.1007/s11595-011-0388-9 ↗
71. The enhancement effect of salt bath chromizing for P20 steel
72. A study on kinetics of CrxC-coated high-chromium steel by thermo-reactive diffusion technique10.1016/j.vacuum.2005.01.009 ↗
73. Characteristics of products of thermo reactive deposition surface treatment on jis-suj2 steel using fe-cr coating powder with process temperature variation10.1088/1757-899X/553/1/012021 ↗
74. Evaluation of chromium carbide coatings on AISI 52100 steel obtained by thermo-reactive diffusion technique
75. The effect of thermo reactive diffusion (TRD) processing time with ferrochromium powder on carbide layer characteristics on SUJ 2 tool steel substrate10.1088/1757-899X/553/1/012019 ↗
76. Corrosion resistance of niobium carbide coatings produced on AISI 1045 steel via thermo-reactive diffusion deposition10.1016/j.surfcoat.2014.10.012 ↗
77. Formation of carbide layers on AISI H13 and D2 steels by treatment in molten borax containing dissolved both Fe-Nb and Fe-Ti powders10.1016/j.matlet.2005.01.052 ↗
78. Kinetic study of niobium carbide coating formation on AISI L2 steel using thermo-reactive deposition technique
79. Micro-abrasive wear test of niobium carbide layers produced on AISI H13 and M2 steels10.1016/j.surfcoat.2005.05.037 ↗
80. Production and characterization of niobium carbide coatings produced on tool steels by thermoreactive deposition/diffusion10.4067/S0718-33052014000200005 ↗
81. Properties and in-service performance of components reated with thermo reactive deposition/diffusion
82. Wear properties of niobium carbide coatings performed by pack method on AISI 1040 steel10.1016/j.tsf.2005.01.008 ↗
83. Effect of rare earth on microstructure and properties of niobiumizing layer on GCr15 steel for pin shaft10.1088/2053-1591/ac80a1 ↗
84. Evaluation of niobium carbide coatings produced on AISI L2 steel via thermo-reactive diffusion technique10.1016/j.vacuum.2017.09.023 ↗
85. Kinetics of niobium carbide coating produced on AISI 1040 steel by thermo-reactive deposition technique10.1016/j.matchemphys.2004.03.002 ↗
86. Production of niobium carbide layers on high-strength bainitic steels by thermochemical treatment of thermoreactive diffusion followed by austempering10.1002/srin.202100352 ↗
87. Structural and electronic properties of chromium carbides and Fe-substituted chromium carbides10.1088/2053-1591/ab8cf9 ↗
88. Wear and corrosion of niobium carbide coated AISI 52100 bearing steel10.1016/j.surfcoat.2015.08.036 ↗
89. Improvement of corrosion resistance for gray cast iron in palm biodiesel application using thermoreactive diffusion niobium carbide (NbC) coating10.3390/coatings8060216 ↗
90. Chromium and vanadium carbide and nitride coatings obtained by TRD techniques on UNI 42CrMoS4 (AISI 4140) steel10.1016/j.surfcoat.2015.12.063 ↗
91. Diffusion mechanism in molten salt baths during the production of carbide coatings via thermal reactive diffusion10.1007/s12613-017-1538-7 ↗
92. Growth behavior and mechanical properties of Cr-V composite surface layer on AISI D3 steel by thermal reactive deposition10.1016/j.vacuum.2017.11.015 ↗
93. Investigation of chromium and vanadium carbide composite coatings on CK45 steel by Thermal Reactive Diffusion10.1016/j.surfcoat.2016.01.048 ↗
94. Optimizing the dual elemental thermal reactive deposition time in carbide layer formation on SUJ2 tool steel10.1063/1.5038294 ↗
95. Properties and corrosion behavior of chromium and vanadium carbide composite coatings produced on ductile cast iron by thermoreactive diffusion technique10.1115/1.4047743 ↗
96. Study of temperature effect on carbide layer formation behaviour of dual elements thermal reactive deposition on SUJ2 steel substrate10.1088/1757-899X/432/1/012019 ↗
97. Effect of thermal degradation on the properties and wear behavior of Cr−V−C composite coatings grown on ductile iron, Surf. Coatings Technol
98. Growth and mechanical properties of Nb-Cr carbide coatings on graphite by TRD technique10.1016/j.ijrmhm.2021.105660 ↗
99. Nb–Cr complex carbide coatings on AISI D2 steel produced by the TRD10.1007/s40430-014-0147-x ↗
100. Wear and corrosion resistance of niobium-chromium carbide coatings on AISI D2 produced through TRD10.1016/j.surfcoat.2014.05.069 ↗