journal article·2023-12

Synergetic effect of Ti-Mg-Sb tri-doping on enhanced electrochemical performance of LiCoO2 at 4.6 V

Weichen Shi, Haojie Dong, Junyi Yin, Xiang Feng, Weiyu Sun, Chenyang Huang, Yonghong Cheng, Xin Xu

Publisher page

Abstract

With a theoretical specific capacity of 274 mAh·g −1, LiCoO 2 (LCO) is the favored cathode material for lithium ion batteries (LIBs) applied to electronic devices. However, the unfavorable transitions in phase of LCO structure at high voltage and the negative reactions occurring at the interface between cathode and electrolyte limit the practical applications of LCO. Therefore, we designed a novel tri-doping strategy to enhance the electrochemical performance of LCO at 4.6 V. The introduction of minimal quantities of Ti, Mg, and Sb to the transition metal (TM) layer of LCO resulted in a substantial increase in both the cycling stability and reversible capacity of LCO. The distribution of the doping elements in the modified LCO was also analyzed, and we found that Ti, Sb were uniformly distributed in the particles, while Mg tended to distribute at the near-surface area of the primary particles. Through the trace Ti-Mg-Sb tri-doping, the modified LCO cathode material can reach an initial discharge capacity of 222.9 mAh·g −1 between 3.0 and 4.6 V at 0.5 C with the capacity retention of 85.1% after 100 cycles. Moreover, the reversible capacity reached 114 mAh·g −1 at 10 C. This research offers a promising future for the development of 4.6 V LCO, as well as valuable insight into designing subsequently multi-element co-doping schemes for LCO cathodes.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (65)

Show source-provided references
1. Li-ion battery materials: present and future10.1016/j.mattod.2014.10.040 ↗
2. 30 years of lithium-ion batteries
3. A reflection on lithium-ion battery cathode chemistry10.1038/s41467-020-15355-0 ↗
4. Understanding and applying coulombic efficiency in lithium metal batteries10.1038/s41560-020-0648-z ↗
5. Batteries and fuel cells for emerging electric vehicle markets10.1038/s41560-018-0108-1 ↗
6. Challenges and opportunities towards fast-charging battery materials10.1038/s41560-019-0405-3 ↗
7. Reviving the lithium metal anode for high-energy batteries10.1038/nnano.2017.16 ↗
8. Cationic Interfacial Layer toward a LiF-Enriched Interphase for Stable Li Metal Batteries10.1021/acsenergylett.2c02379 ↗
9. High-nickel layered oxide cathodes for lithium-based automotive batteries10.1038/s41560-019-0513-0 ↗
10. LixCoO2 (0<x≤1): a new cathode material for batteries of high energy density10.1016/0167-2738(81)90077-1 ↗
11. A review: Modification strategies of nickel-rich layer structure cathode (Ni≥0.8) materials for lithium-ion power batteries10.1016/j.jechem.2021.01.044 ↗
12. Methods to obtain excellent capacity retention in LiCoO2 cycled to 4.5 V10.1016/j.electacta.2003.10.019 ↗
13. Improving the cycling stability of LiCoO2 at 4.5 V through surface modification by Fe2O3 coating10.1016/j.electacta.2013.09.105 ↗
14. Surface Engineering Strategies of Layered LiCoO2 Cathode Material to Realize High-Energy and High-Voltage Li-Ion Cells10.1002/aenm.201601507 ↗
15. Temperature-Sensitive Structure Evolution of Lithium-Manganese-Rich Layered Oxides for Lithium-Ion Batteries10.1021/jacs.8b07858 ↗
16. Urea-assisted mixed gas treatment on Li-Rich layered oxide with enhanced electrochemical performance10.1016/j.jechem.2021.07.023 ↗
17. CoO2, the end member of the LixCoO2 solid solution10.1149/1.1836594 ↗
18. Unveiling the intrinsic cycle reversibility of a LiCoO2 electrode at 4.8 V cutoff voltage through subtractive surface modification for Lithium-ion batteries10.1021/acs.nanolett.8b02902 ↗
19. Direct conversion of degraded LiCoO2 cathode materials into high-performance LiCoO2: A closed-loop green recycling strategy for spent lithium-ion batteries10.1016/j.ensm.2021.12.013 ↗
20. Reviving lithium cobalt oxide-based lithium secondary batteries-toward a higher energy density10.1039/C8CS00322J ↗
21. Structural origin of the high-voltage instability of lithium cobalt oxide10.1038/s41565-021-00855-x ↗
22. Delayed phase transition and improved cycling/thermal stability by spinel LiNi0.5Mn1.5O4 Modification for LiCoO2 cathode at high voltages10.1021/acsami.0c02459 ↗
23. Surface-protected LiCoO2 with ultrathin solid oxide electrolyte film for high-voltage lithium ion batteries and lithium polymer batteries10.1016/j.jpowsour.2018.03.076 ↗
24. Gradient-morph LiCoO2 single crystals with stabilized energy density above 3400 Wh·L−110.1039/D0EE00231C ↗
25. A surface Se-substituted LiCo[O2-delta Se delta] cathode with ultrastable high-voltage cycling in pouch full-cells10.1002/adma.202005182 ↗
26. Origins of capacity and voltage fading of LiCoO2 upon high voltage cycling10.1039/C9TA06579B ↗
27. Oxygen contribution on Li-ion Intercalation−Deintercalation in LiCoO2 investigated by O K-edge and Co L-edge X-ray absorption spectroscopy10.1021/jp013735e ↗
28. An outlook on lithium ion battery technology10.1021/acscentsci.7b00288 ↗
29. An overview on the advances of LiCoO2 cathodes for lithium-ion batteries10.1002/aenm.202000982 ↗
30. X-ray diffraction, 57Fe M¨ossbauer and step potential electrochemical spectroscopy study of LiFeyCo1−yO2 compounds10.1016/S0378-7753(99)00213-X ↗
31. Microwave synthesis of novel high voltage (4.6 V) high capacity LiCuxCo1−xO2±δ cathode material for lithium rechargeable cells10.1016/j.jpowsour.2010.10.053 ↗
32. Unveiling nickel chemistry in stabilizing high-voltage cobalt-rich cathodes for lithium-ion batteries10.1002/adfm.201907903 ↗
33. Realization of Ti doping by electrostatic assembly to improve the stability of LiCoO2 cycled to 4.5 V10.1149/2.0421910jes ↗
34. Effect of Mn-substitution for Co on the crystal structure and acid delithiation of LiMnyCo1−yO2 solid solutions10.1016/0167-2738(94)90039-6 ↗
35. Approaching the capacity limit of lithium cobalt oxide in lithium-ion batteries via lanthanum and aluminium doping10.1038/s41560-018-0180-6 ↗
36. Characterization of surface of LiCoO2 modified by Zr oxides using analytical transmission electron microscopy10.1149/2.0141410jes ↗
37. Addition of yttrium oxide as an effective way to enhance the cycling stability of LiCoO2 cathode material for Li-ion batteries10.1016/j.ssi.2020.115426 ↗
38. Mg-Pillared LiCoO2: Towards Stable Cycling at 4.6 V10.1002/ange.202014226 ↗
39. Effect of particle size and doping on the electrochemical characteristics of Ca-doped LiCoO2 cathodes
40. The negative and positive structural effects of Ga oping in the electrochemical performance of LiCoO210.1016/j.electacta.2005.04.001 ↗
41. Relative impact of Al or Mg substitution on the thermal stability of LiCo1−zMzO2 (M¼Al or Mg) by accelerating rate calorimetry10.1149/1.3223910 ↗
42. Sb-Doped high-voltage LiCoO2 enabled improved structural stability and rate capability for high-performance Li-ion batteries10.1039/D2CC01152B ↗
43. The origin of heavy element doping to relieve the lattice thermal vibration of layered materials for high energy density Li ion cathodes10.1039/D0TA03979A ↗
44. Enabling stable 4.6 V LiCoO2 cathode through oxygen charge regulation strategy10.1016/j.jechem.2022.09.034 ↗
45. Tri-sites co-doping: An efficient strategy towards the realization of 4.6V-LiCoO2 with cyclic stability
46. LiCo1−yByO2 as cathode materials for rechargeable lithium batteries10.1021/cm1026865 ↗
47. Outside-In Nanostructure Fabricated on LiCoO2 Surface for High-Voltage Lithium-Ion Batteries10.1002/advs.202104841 ↗
48. Synthesis of LiCo0.94Mg0.06O2: a promising material with high dielectric and microwave absorption performance10.1007/s10854-019-01949-y ↗
49. Synthesis and characterization of tetravalent titanium (Ti4+) substituted LiCoO2 for lithium-ion batteries10.1016/j.mseb.2006.04.013 ↗
50. Hierarchical defect engineering for LiCoO2 through low-solubility trace element doping10.1016/j.chempr.2020.07.017 ↗
51. A novel bifunctional self-stabilized strategy enabling 4.6 V LiCoO2 with excellent long-term cyclability and high-rate capability
52. A multifunctional manipulation to stabilize oxygen redox and phase transition in 4.6 V high-voltage LiCoO2 with sXAS and EPR studies10.1016/j.jpowsour.2021.230661 ↗
53. Trace doping of multiple elements enables stable battery cycling of LiCoO2 at 4.6 V10.1038/s41560-019-0409-z ↗
54. Interplay between multiple doping elements in high-voltage LiCoO210.1039/D0TA09931G ↗
55. Cation and anion Co-doping synergy to improve structural stability of Li- and Mn-rich layered cathode materials for lithium-ion batteries10.1016/j.nanoen.2018.12.049 ↗
56. Delayed Phase Transition and Improved Cycling/Thermal Stability by Spinel LiNi0.5Mn1.5O4 Modification for LiCoO2 Cathode at High Voltages10.1021/acsami.0c02459 ↗
57. Construction of homogeneously Al3+ doped Ni rich Ni-Co-Mn cathode with high stable cycling performance and storage stability via scalable continuous precipitation10.1016/j.electacta.2018.08.124 ↗
58. Al2O3 surface coating on LiCoO2 through a facile and scalable wet-chemical method towards high-energy cathode materials withstanding high cutoff voltages10.1039/C7TA07312G ↗
59. Could Li/Ni Disorder be Utilized Positively? Combined Experimental and Computational Investigation on Pillar Effect of Ni at Li Sites on LiCoO2 at High Voltages10.1016/j.electacta.2014.08.151 ↗
60. Depth-dependent redox behavior of LiNi0.6Mn0.2Co0.2O210.1149/2.1021803jes ↗
61. Improved cycling stability of high nickel cathode material for lithium-ion battery through Al- and Ti-based dual modification10.1039/D1NR06005H ↗
62. Analysis of the chemical diffusion coefficient of lithium ions in Li3V2(PO4)3 cathode material10.1016/j.electacta.2009.11.096 ↗
63. Blow-spinning enabled precise doping and coating for improving high-voltage lithium cobalt oxide cathode performance10.1021/acs.nanolett.9b04486 ↗
64. Highly stable Li1.2Mn0.54Co0.13Ni0.13O2 enabled by novel atomic layer deposited AlPO4 coating10.1016/j.nanoen.2017.02.015 ↗
65. Realizing long-term cycling stability and superior rate performance of 4.5 V-LiCoO2 by aluminum doped zinc oxide coating achieved by a simple wet-mixing method10.1016/j.jpowsour.2020.228423 ↗