Microstructure, mechanical, and electrochemical properties of Si/DLC coating deposited on 2024-T3 Al alloy
Source abstract
Abstract
This work evaluated the microstructure, mechanical, and electrochemical properties of Si/DLC coatings deposited using the plasma-enhanced chemical vapor deposition (PECVD) technique. Tetramethylsilane and acetylene were used as precursor gases in the deposition process. The characteristics of the coating were estimated using different techniques. The corrosion performance was evaluated using various electrochemical methods in 3.5 wt% NaCl solution. The XPS analysis revealed that the film consists of Si and (a-C: H). The results revealed that as the deposition time increased, the hardness and Young`s modulus decreased from 15.83 to 14.21 GPa and 125.8–114.9 GPa, respectively, while the thickness and adhesion strength increased. Moreover, the anti-corrosion ability of the DLC has been improved. It was found the corrosion potential moved to more noble direction (−618 to −562 mV Ag/AgCl ) while the corrosion rate decreased from 0.012 to 0.001 mmy −1. This trend can be attributed to growing coating thickness and fewer film defects which operated as a protective barrier against the corrosive solution. A failure mechanism of Si/DLC film has been suggested.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Improving the corrosion protection of aluminium alloys using reactive magnetron sputtering10.1016/j.corsci.2003.06.002 ↗
2. Corrosion protection of aluminium alloy by cerium conversion and conducting polymer duplex coatings10.1016/j.corsci.2012.06.020 ↗
3. Development and characterization of sealed anodizing as a corrosion protection for AA2024-T3 in saline media
4. Electrodeposition of silane/reduced graphene oxide nanocomposite on AA2024-T3 alloy with enhanced corrosion protection, chemical and mechanical stability10.1016/j.jallcom.2022.165058 ↗
5. Electrochemical studies and growth of apatite on molybdenum doped DLC coatings on titanium alloy β-21S10.1016/j.apsusc.2014.01.049 ↗
6. Corrosion inhibition characteristics of multilayer Si-DLC, phosphating and anodizing coatings deposited on 2024 Al alloy: a comparative study10.1016/j.diamond.2021.108460 ↗
7. Effect of bias voltage on characteristics of multilayer Si-DLC film coated on AA6061 aluminum alloy10.1007/s11665-020-05397-2 ↗
8. Characterization of DC magnetron sputtered diamond-like carbon (DLC) nano coating10.1007/s00170-007-1131-8 ↗
9. Filtered cathodic vacuum Arc deposition of nano-layered composite coatings for machining hard-to-cut materials
10. Pulsed Laser Deposition (PLD) -- a versatile thin film technique10.1007/978-3-540-44838-9_36 ↗
11. Dlc-based coatings obtained by low-frequency plasma-enhanced chemical vapor deposition (Lfpecvd) in cyclohexane, principle and examples10.3390/coatings11101225 ↗
12. Corrosion behavior and passive stability of multilayer DLC-Si coatings10.1016/j.surfcoat.2021.128001 ↗
13. Effect of temperature and mating pair on tribological properties of DLC and GLC coatings under high pressure lubricated by MoDTC and ZDDP10.1007/s40544-020-0420-1 ↗
14. The effect of acetylene flow rate on the uniform deposition of thick DLC coatings on the inner surface of pipes with different draw ratios10.1016/j.vacuum.2021.110720 ↗
15. Influence of substrate bias voltage on corrosion and wear behavior of physical vapor deposition CrN coatings10.1007/s11665-019-04033-y ↗
16. Influence of positive pulse voltages on structure, mechanical, and corrosion inhibition characteristics of Si/DLC coatings10.1016/j.surfcoat.2022.128749 ↗
17. Influences of target power and pulse width on the growth of diamond-like/graphite-like carbon coatings deposited by high power impulse magnetron sputtering10.1016/j.diamond.2020.108232 ↗
18. Effect of working pressure on the structure and the electrochemical corrosion behavior of diamond-like carbon (DLC) coatings on the NiTi alloys10.1016/j.surfcoat.2006.07.164 ↗
19. 2016 · 82 · 1
20. Electrochemical study of Monel alloy corrosion in hydrochloric acid solution and pyrrolidine dithiocarboxylate self-assembled monolayers as its corrosion protector10.1016/j.jallcom.2018.04.074 ↗
21. Corrosion inhibition of 2024-T3 aluminum alloy in 3.5% NaCl by thiosemicarbazone derivatives10.1016/j.corsci.2018.03.021 ↗
22. Effect of deposition time on hardness and bonding strength of magnetron sputtered TiN coatings on 316 stainless steel10.4028/www.scientific.net/KEM.726.303 ↗
23. DLC coating roughness as a function of film thickness10.1016/j.surfcoat.2005.05.030 ↗
24. The influence of positive pulses on HiPIMS deposition of hard DLC coatings10.1016/j.surfcoat.2018.11.001 ↗
25. Preparation and properties of Ag-containing diamond-like carbon films by magnetron plasma source ion implantation
26. Bonding in hydrogenated diamond-like carbon by Raman spectroscopy10.1016/j.diamond.2004.10.030 ↗
27. CVD-diamond nanoparticle synthesis for DLC film application10.1007/s11051-020-05018-y ↗
28. XPS and XRR studies on microstructures and interfaces of DLC films deposited by FCVA method10.1016/S0040-6090(02)00750-2 ↗
29. Raman and XPS studies of DLC films prepared by a magnetron sputter-type negative ion source10.1016/j.surfcoat.2004.08.073 ↗
30. Effect of adhesion strength of DLC to steel on the coating erosion mechanism10.1016/S0925-9635(01)00430-7 ↗
31. Impacts of the a-Si:H interlayer nanostructure on the adhesion of the thick DLC coatings prepared by PECVD10.1016/j.apsusc.2021.150539 ↗
32. Plasma deposition and characterization of silicon oxide-containing diamond-like carbon films obtained from CH4:SiH4:O2 gas mixtures10.1016/j.tsf.2007.10.119 ↗
33. A Raman study to obtain crystallite size of carbon materials: A better alternative to the Tuinstra–Koenig law10.1016/j.carbon.2014.09.006 ↗
34. Impedance study on electrochemical characteristics of sputtered DLC films10.1016/S0040-6090(02)01289-0 ↗
35. Influence of positive pulse voltages on structure, mechanical, and corrosion inhibition characteristics of Si/DLC coatings10.1016/j.surfcoat.2022.128749 ↗
36. Corrosion resistant behaviour of DLC films10.1016/j.tsf.2007.07.099 ↗
37. Effects of silicon on microstructure and corrosion resistance of diamond-like-carbon film prepared on 2024 aluminum alloy by plasma-enhanced chemical vapor deposition10.1016/j.diamond.2020.108144 ↗
38. Enhanced vapor transmission barrier properties via silicon-incorporated diamond-like carbon coating10.3390/polym13203543 ↗
39. Surface characteristics and biological evaluation of Si-DLC coatings fabricated using magnetron sputtering method on Ti6Al7Nb substrate10.3390/nano9060812 ↗