Effect of C content on microstructure and hot deformation behavior of a Ni-based superalloy
Source abstract
Abstract
In this work, isothermal compression tests of a Ni-based superalloy were carried out at γ′ sub-solvus (1140 ℃) and γ′ super-solvus (1170 ℃) temperatures under a true strain 0.693. The effect of C contents (0.01 wt%, 0.04 wt% and 0.08 wt%) on the microstructural evolution and hot deformation behavior of the alloy was investigated. The formation of MC carbide is closely related to C content. Besides, the initial grain size decreased slightly with the increase of C content due to the effect MC carbides. During compression deformation at 1140 ℃, the peak stress increased with the increase of C content. When deformed at 1170 ℃, the 0.04 wt% C alloy has the lowest peak stress, because of the acceleration effect on dynamic recrystallization DRX by MC carbides. However, the 0.08 wt% C alloy has the highest peak stress, the dislocation density also increases with the number of MC carbides increase，which caused high working hardening rate and increased the peak stress in 0.08 wt% C alloy. The discontinuous dynamic recrystallization (DDRX) is the dominant mechanism during deformation at 1140 ℃, while the DDRX and continuous dynamic recrystallization (CDRX) occurred at the same time when deformed at 1170 ℃.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Reed · 2006
2. New Ni–Co-base disk superalloys with higher strength and creep resistance10.1016/j.scriptamat.2006.07.008 ↗
3. Microstructural evolution and mechanical properties of a Ni-based superalloy, TMW-410.1007/s11661-008-9746-4 ↗
4. Creep mechanisms of a Ni-Co-based-wrought superalloy with low stacking fault energy10.1007/s11661-015-2818-3 ↗
5. Investigation on sub-solvus recrystallization mechanisms in an advanced γ-γ′ nickel-based superalloy GH415110.3390/ma13204553 ↗
6. Superplastic deformation and dynamic recrystallization of a novel disc superalloy GH415110.3390/ma12223667 ↗
7. Element segregation and solidification behavior of a Nb, Ti, Al Co-strengthened superalloy ЭК15110.1007/s40195-019-00894-3 ↗
8. Present research situation and prospect of hot working of cast & Wrought superalloys for aero-engine turbine disk in China
9. Deformation mechanisms in a fine-grained Udimet 720LI nickel-base superalloy with high volume fractions of γ′ phases10.1016/j.msea.2016.07.068 ↗
10. Effect of Ta addition on the microstructure and tensile properties of a Ni-Co base superalloy10.1007/s11661-020-06081-9 ↗
11. Microstructural evolution of a Ni-Co based superalloy during hot compression at γ′ sub-/super-solvus temperatures10.1016/j.jmst.2020.10.042 ↗
12. Effect of carbon additions on the as-cast microstructure and defect formation of a single crystal Ni-based superalloy10.1016/j.msea.2004.01.030 ↗
13. Improvement of creep rupture strength of a liquid metal cooling directionally solidified nickel-base superalloy by carbides10.1016/j.jallcom.2008.07.127 ↗
14. The influence of carbon addition on carbide characteristics and mechanical properties of CM-681LC superalloy using fine-grain process10.1016/j.jallcom.2011.02.146 ↗
15. Microstructural evolution and deformation features in gas turbine blades operated in-service10.1016/j.jallcom.2014.08.246 ↗
16. Formation and stability of nano-scaled M23C6 carbide in a directionally solidified Ni-base superalloy10.1016/j.matchar.2009.08.008 ↗
17. Influence of type and morphology of carbides on stress-rupture behavior of a cast cobalt-base superalloy10.1016/j.jallcom.2017.08.287 ↗
18. On the role of carbides during the recrystallization of a directionally solidified nickel-base superalloy10.1016/j.scriptamat.2006.05.013 ↗
19. In-situ observation of crack initiation and propagation in Ni-based superalloy with film cooling holes during tensile test10.1016/j.jallcom.2019.04.139 ↗
20. MC carbide formation in directionally solidified MAR-M247 LC superalloy10.1016/S0921-5093(97)00761-2 ↗
21. Thermal fatigue behavior of K465 superalloy10.1016/S1001-0521(06)60040-5 ↗
22. Role of carbides on hot deformation behavior and dynamic recrystallization of hard-deformed superalloy U720Li10.1016/j.msea.2021.141293 ↗
23. Annealing behavior of the ODS nickel-based superalloy PM 100010.1016/j.msea.2003.11.052 ↗
24. Effect of recrystallisation on microstructural evolution and mechanical properties of single crystal nickel base superalloy CMSX-2 Part 1 – microstructural evolution during recrystallisation of single crystal10.1179/026708303225008301 ↗
25. Hot compression behaviors and deformation mechanisms of a Ni–Co-based superalloy with columnar grains10.1016/j.msea.2021.142370 ↗
26. Effect of boron and carbon on the hot deformation behavior of a novel third generation nickel-based powder metallurgy superalloy WZ-A3
27. Hot deformation behavior and workability of a Ni–Co based superalloy10.1016/j.jallcom.2020.154618 ↗
28. Effects of heat treatment on γ′ precipitates and tensile properties of a Ni-base superalloy10.1016/j.msea.2022.143079 ↗
29. Effect of solidification rate on MC-type carbide morphology in single crystal Ni-base superalloy AM310.1016/S1003-6326(09)60382-4 ↗
30. Effect of carbon addition on carbide morphology of single crystal Ni-based superalloy10.1016/S1003-6326(14)63066-1 ↗
31. Effect of initial state on hot deformation and dynamic recrystallization of Ni-Fe based alloy GH984G for steam boiler applications10.1016/j.jallcom.2019.05.022 ↗
32. Abnormal dynamic recrystallization behavior of a nickel-based superalloy during hot deformation10.1016/j.jallcom.2019.02.055 ↗
33. Strain rate dependent microstructural evolution during hot deformation of a hot isostatically processed nickel base superalloy10.1016/j.jallcom.2016.04.185 ↗
34. A study on the effect of strain rate on the dynamic recrystallization mechanism of alloy 617B10.1007/s11661-016-3664-7 ↗
35. Microstructural evolution of a nickel-based superalloy during hot deformation10.1016/j.matdes.2015.04.004 ↗
36. EBSD analysis of evolution of dynamic recrystallization grains and δ phase in a nickel-based superalloy during hot compressive deformation10.1016/j.matdes.2016.02.052 ↗
37. Effect of initial grain size on the hot deformation behavior of 47Zr–45Ti–5Al–3V alloy10.1016/j.jnucmat.2014.08.035 ↗
38. Humphreys · 2012
39. The deformation of plastically non-homogeneous materials10.1080/14786437008238426 ↗
40. Effect of carbon content on the recrystallization of a single crystal nickel-based superalloy10.1016/j.matlet.2013.07.073 ↗
41. The effects of carbon content on the microstructure and elevated temperature tensile strength of a nickel-base superalloy10.1016/j.msea.2010.03.053 ↗
42. Effects of b, c, and Zr on the structure and properties of a p/m nickel base superalloy10.1007/BF02646223 ↗
43. The effect of deformation temperature on the microstructure evolution of Inconel 625 superalloy10.1016/j.jnucmat.2011.05.029 ↗
44. The microstructure evolution and nucleation mechanisms of dynamic recrystallization in hot-deformed Inconel 625 superalloy10.1016/j.matdes.2010.07.040 ↗
45. Necklace formation during dynamic recrystallization: mechanisms and impact on flow behavior10.1016/S1359-6454(97)00233-4 ↗
46. Mean field modelling of dynamic and post-dynamic recrystallization during hot deformation of Inconel 718 in the absence of δ phase particles10.1016/j.msea.2015.12.102 ↗
47. Heteroepitaxial recrystallization: a new mechanism discovered in a polycrystalline γ-γ′ nickel based superalloy10.1016/j.jallcom.2016.07.240 ↗