Bifunctional oxygen electrocatalysts with WN@Ni nanostructures implanted on N-doped carbon nanorods for rechargeable Zn-Air batteries
Source abstract
Abstract
Achieving the rational design of oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) bifunctional noble metal-free electrocatalysts has become one of the key research areas for the application of rechargeable Zn-air batteries (ZABs), which still remains a significant challenge. Herein, an in-situ polyaniline nitriding strategy has been developed to fabricate WN-Ni heterostructured catalysts. Polyaniline serves as both the carbon source and the N species that can in situ release gas (NH 3) to produce the WN phase. As-fabricated WN-Ni heterostructured catalyst exhibits excellent activity towards ORR and OER, in which the half-wave potential is 0.76 V for ORR, and the over-potential for OER is 1.68 V at 10 mA cm −2. Due to its exceptional ORR/OER activities, the assembled rechargeable ZAB obtains a high power density of 165 mW cm −2 . It also exhibits outstanding stability after being subjected to a discharge-charge cycle procedure (>400 h). The remarkable activity of the WN-Ni heterostructured materials should be attributed to their hierarchical nanorod-nanoparticle structure, proper crystallinity of WN-Ni, and good charge/mass transfer ability, which effectively regulate the electron redistribution at the WN-Ni heterointerface and facilitate the charge transfer between two entities.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrocatalysts for Energy Conversion · Fuel Cells and Related Materials · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Atomically dispersed nonmagnetic electron traps improve oxygen reduction activity of perovskite oxides.10.1039/D0EE03701J ↗
2. Atomic‐level insight of sulfidation‐engineered Aurivillius‐related Bi2O2SiO3 nanosheets enabling visible light low‐concentration CO2 conversion10.1002/cey2.264 ↗
3. Tuning mass transport in electrocatalysis down to sub-5nm through nanoscale grade separation
4. CoNi nanoalloy-Co-N4 composite active sites embedded in hierarchical porous carbon as bi-functional catalysts for flexible Zn-air battery10.1016/j.nanoen.2022.107325 ↗
5. Single atom V-N charge-transfer bridge on ultrathin carbon nitride for efficient photocatalytic H2 production and formaldehyde oxidation under visible light10.1016/j.cej.2021.132229 ↗
6. Continuous modulation of electrocatalytic oxygen reduction activities of single-atom catalysts through p-n junction rectification
7. Co/MoN hetero-interface nanoflake array with enhanced water dissociation capability achieves the Pt-like hydrogen evolution catalytic performance10.1016/j.apcatb.2021.119882 ↗
8. Molecular-functionalized engineering of porous carbon nitride nanosheets for wide-spectrum responsive solar fuel generation10.1016/j.jcis.2021.09.034 ↗
9. One-step, integrated fabrication of Co2P nanoparticles encapsulated N, P dual-doped CNTs for highly advanced total water splitting10.1016/j.nanoen.2016.10.024 ↗
10. Isolated transition metal nanoparticles anchored on N-doped carbon nanotubes as scalable bifunctional electrocatalysts for efficient Zn–Air batteries10.1016/j.jcis.2022.09.014 ↗
11. Highly active Fe centered FeM-N-doped carbon (M = Co/Ni/Mn): a general strategy for efficient oxygen conversion in Zn-air battery10.1016/j.cej.2021.130559 ↗
12. One-step, in situ formation of WN-W2C heterojunctions implanted on N doped carbon nanorods as efficient oxygen reduction catalyst for metal-air battery10.1007/s12274-023-5501-9 ↗
13. Probing into the effect of heterojunctions between Cu/Mo2C/Mo2N on HER performance10.1039/C9CY02526J ↗
14. Synthesis of W2N nanorods-graphene hybrid structure with enhanced oxygen reduction reaction performance10.1016/j.ijhydene.2017.08.126 ↗
15. WXy/g-C3N4 (WXy =W2C, WS2, or W2N) composites for highly efficient photocatalytic water splitting10.1002/cssc.201900844 ↗
16. Melamine-assisted synthesis of ultrafine Mo2C/Mo2N@N-doped carbon nanofibers for enhanced alkaline hydrogen evolution reaction activity10.1007/s40843-020-1511-7 ↗
17. A self-supported porous WN nanowire array: an efficient 3D electrocatalyst for the hydrogen evolution reaction10.1039/C7TA04923D ↗
18. Crystal structure of and displacive phase transition in tungsten nitride WN10.1016/j.jallcom.2017.06.079 ↗
19. Synthesis and characterization of tungsten nitride (W2N) from WO3 and H2WO4 to be used in the electrode of electrochemical devices10.1016/j.ceramint.2014.11.114 ↗
20. Enhanced oxidative desulfurization of liquid model fuel under microwave irradiation over W2N@C catalyst nanoarchitectonics10.1016/j.cej.2022.135841 ↗
21. 0D/3D Bi3TaO7/ZnIn2S4 heterojunction photocatalyst towards degradation of antibiotics coupled with simultaneous H2 evolution: In situ irradiated XPS investigation and S-scheme mechanism insight10.1016/j.apsusc.2022.153444 ↗
22. Jagged carbon nanotubes from polyaniline: strain-driven high-performance for Zn-air battery10.1016/j.cej.2022.134617 ↗
23. Metallic AgInS2 nanocrystals with sulfur vacancies boost atmospheric CO2 photoreduction under near-infrared light illumination10.1016/j.apcatb.2023.122763 ↗
24. Self-standing Ni-WN heterostructure nanowires array: a highly efficient catalytic cathode for hydrogen evolution reaction in alkaline solution10.1016/j.electacta.2016.06.003 ↗
25. Unveiling S‐scheme charge transfer pathways in In2S3 /Nb2O5 hybrid nanofiber photocatalysts for low‐concentration CO2 hydrogenation10.1002/solr.202200963 ↗
26. N, P doped carbon nanotubes confined WN-Ni Mott-Schottky heterogeneous electrocatalyst for water splitting and rechargeable zinc-air batteries10.1016/j.apcatb.2021.120511 ↗
27. Efficient alkaline water/seawater hydrogen evolution by a nanorod-nanoparticle-structured Ni-MoN catalyst with fast water-dissociation kinetics
28. Advanced Ru/Ni/WC@NPC multi-interfacial electrocatalyst for efficient sustainable hydrogen and chlor-alkali co-production10.1002/aenm.202200332 ↗
29. Reversing sintering effect of Ni particles on gamma-Mo2N via strong metal support interaction10.1038/s41467-021-27116-8 ↗
30. Highly stable Co single atom confined in hierarchical carbon molecular sieve as efficient electrocatalysts in metal–air batteries10.1002/aenm.202103097 ↗
31. Insights into the use of Te-O pairs as active centers of carbon nanosheets for efficient electrochemical oxygen reduction10.1021/acsnano.3c01662 ↗
32. Precise identification of active sites of a high bifunctional performance 3D Co/N-C catalyst in Zinc-air batteries10.1016/j.cej.2022.134500 ↗
33. Oxygen-rich cobalt-nitrogen-carbon porous nanosheets for bifunctional oxygen electrocatalysis
34. Polydopamine-coated bimetallic ZIF derivatives as an air cathode for acidic Zn-air batteries with super-high potential10.1039/D1CC04443E ↗
35. Aminouracil-assisted synthesis of CoFe decorated bougainvillea-like N-doped carbon nanoflowers for boosting Zn-air battery and water electrolysis10.1016/j.jpowsour.2021.230926 ↗
36. Nitrogen-doped Fe2O3/NiTe2 as an excellent bifunctional electrocatalyst for overall water splitting10.1016/j.jcis.2023.02.071 ↗
37. Surface state engineering of carbon dot/carbon nanotube heterojunctions for boosting oxygen reduction performance10.1016/j.jcis.2023.01.082 ↗
38. Reinforced layered double hydroxide oxygen evolution electrocatalysts: polyoxometallic acid wet-etching approach and synergistic mechanism10.1002/adma.202110696 ↗