journal article·2023-10

High-performance Cu-Al shape memory alloy in ternary combination with graphene fabricated by powder bed fusion process

Daniyal Abolhasani, Byungrok Moon, Namhyun Kang, Chester J. VanTyne, Young Hoon Moon

Publisher page

Abstract

The main characteristic feature of Cu-based high-temperature shape memory alloys (SMAs) such as Cu-Al-Ni alloys is their high transformation temperatures that enable their applications at high temperatures. The improvement of thermodynamic properties of SMAs with reinforcements is essential for more applications at high temperatures with fewer negative effects of exposure at high temperatures, such as alloy softening that can deteriorate the strength and shape memory effect (SME) simultaneously. To avoid the negative effects of micro-reinforcements such as stress localization, in this study, graphene (GN) was substituted with Ni, and a new alloy labeled Cu-Al-GN with 0.2 wt% graphene was formed. A graphene-reinforced alloy labeled Cu-Al-Ni-GN was also fabricated by a laser powder bed fusion process for comparison purposes. The results showed that the Cu-Al-GN alloy exhibited enhanced performance in terms of improved reinforcement distribution, finer grains, defect-free samples with the highest SME at subsequent cycles, and less time required to achieve a targeted SME during heating, despite the smaller SME in the initial recovery cycles. Thus, the results of this study confirm that the proposed Cu-Al-0.2GN alloy combination promises high performance for recovery cycles and is time and cost saving, rendering it a suitable candidate for rapid production.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Shape Memory Alloy Transformations · High Entropy Alloys Studies · Innovations in Concrete and Construction Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. 3D and 4D printing of complex structures of Fe-Mn-Si-based shape memory alloy using laser powder bed fusion10.1002/admi.202270075 ↗
2. Biocompatibility study of a Cu-Al-Ni rod obtained by continuous casting10.3390/pr10081507 ↗
3. Cu-based shape memory alloys: modified structures and their related properties
4. Enhancing the shape memory effect of Cu-Al-Ni alloys via partial reinforcement by alumina through selective laser melting10.1016/j.jmrt.2021.10.040 ↗
5. Graphene-reinforced bulk metal matrix composites: synthesis, microstructure, and properties10.1515/rams-2020-0007 ↗
6. Laser-assisted synthesis in Cu–Al–Ni system and some of its properties10.1016/j.jallcom.2015.10.299 ↗
7. Mechanical strength evaluation of a CuAlBe shape memory alloy under different thermal conditions10.4028/www.scientific.net/MSF.643.105 ↗
8. Powder bed fusion of two-functional Cu-Al-Ni shape memory alloys utilized for 4D printing10.1016/j.jallcom.2022.166228 ↗
9. Selective laser remelting of an additively manufactured Cu-Al-Ni-Mn shape-memory alloy10.1016/j.matdes.2018.05.010 ↗
10. Effect of Nd addition on the microstructure, mechanical properties, shape memory effect and corrosion behaviour of Cu–Al–Ni high-temperature shape memory alloys10.1016/j.jallcom.2020.157685 ↗
11. Compressive behavior of NiTi-based composites reinforced with alumina nanoparticles10.1016/j.jallcom.2016.06.299 ↗
12. Microstructure and mechanical behaviour of aluminium matrix composites reinforced with graphene oxide and carbon nanotubes10.1007/s10853-017-1450-6 ↗
13. Selective laser melting of AISI 304 stainless steel composites reinforced by Al2O3 and eutectic mixture of Al2O3–ZrO2 powders10.1016/j.msea.2019.138161 ↗
14. High-temperature shape memory alloys based on the Cu-Al-Ni system: design and thermomechanical characterization10.1016/j.jmrt.2020.07.002 ↗
15. Investigation of the load-bearing capacity of Co-Cr lattice structures fabricated by selective laser melting
16. Carbonitriding of Ti-6Al-4V alloy via laser irradiation of pure graphite powder in nitrogen environment10.1016/j.surfcoat.2019.02.038 ↗
17. Graphene reinforced metal and ceramic matrix composites: a review10.1080/09506608.2016.1219481 ↗
18. Microstructure and mechanical characterizations of graphene nanoplatelets-reinforced Mg–Sr–Ca alloy as a novel composite in structural and biomedical applications10.1177/0021998319867464 ↗
19. Shape memory characteristics of silver-added Fe–30Mn–6Si alloy10.1007/s12666-022-02542-4 ↗
20. In-situ synthesis of graphene decorated with nickel nanoparticles for fabricating reinforced 6061Al matrix composites10.1016/j.msea.2017.05.084 ↗
21. Analysis of melt-pool behaviors during selective laser melting of AISI 304 stainless-steel composites10.3390/met9080876 ↗
22. Experimental and molecular dynamics simulation study on the glass formation of Cu–Zr–Al alloys10.1088/2053-1591/aaf97e ↗
23. Shocking of metallic glass to induce microstructure heterogeneity: a molecular dynamics study10.1063/1.5000366 ↗
24. Structural evolution of a CuZr-based bulk metallic glass composite during cryogenic treatment observed by in-situ high-energy X-ray diffraction10.1016/j.jallcom.2021.159570 ↗
25. Nó mL. “In situ” and “Post-morten” TEM study of the super-elastic effect in Cu-Al-Ni shape memory alloys10.1016/j.msea.2006.01.105 ↗
26. Determination of the next-nearest neighbour order in phase in Cu-Al-Ni shape memory alloys10.1063/1.1504883 ↗
27. Crystal structure analysis of γ′1Cu-Al-Ni martensite using conventional X-Rays and synchrotron radiations10.1007/BF02646062 ↗
28. International Tables for Crystallography, Vol. A, fifth ed., Dortretch-Kluwer, 2002, pp. 158–282.
29. Effects of alloying, heat treatment and nanoreinforcement on mechanical properties and damping performances of Cu–Al-based alloys: a review10.1515/ntrev-2021-0101 ↗
30. Numerical study of the effect of progressive solidification on residual stress in single-bead-on-plate additive manufacturing
31. Pseudopartial grain boundary wetting: key to the thin intergranular layers10.4028/www.scientific.net/DDF.333.175 ↗
32. The grain boundary wetting phenomena in the ti-containing high-entropy alloys: a review10.3390/met11111881 ↗
33. Formation of the ω phase in the titanium—iron system under shear deformation10.1134/S0021364020100033 ↗
34. Fabrication, characterization and potential application of larger bulk Ti-Ni-Hf high temperature shape memory alloy composite reinforced by hybrid particles10.1016/j.jallcom.2018.06.084 ↗
35. Exploration of magnetic shape memory alloys in Ga2Mo x (X= Cr, Mn, Fe, Co, and Ni) systems: a first-principles study
36. Influence of nickel and copper on liquid structure of CuAlNi shape memory alloys10.1007/BF02901105 ↗