journal article·2023-09

Effects of AgSnSe2 addition on the thermoelectric properties of Bi0.5Sb1.5Te3

Xin Niu, Yudong Lang, Lin Pan, Yifeng Wang

Publisher page

Abstract

In this study, the thermoelectric properties of Bi 0.5Sb 1.5Te 3 with the addition of AgSnSe 2 were investigated. It was found that the addition of AgSnSe 2 significantly improved the electrical conductivity of the Bi 0.5Sb 1.5Te 3 based sample, which was attributed to the spontaneous Ag doping and the generation of the high carrier concentration SnTe secondary phase. Due to the significant increase in σ, the maximum PF increased to ∼39 μW cm −1K −2 at 323 K. Meanwhile, owing to the larger lattice anharmonicity by spontaneous Ag doping and enhanced interfacial scattering of phonons by secondary phase SnTe, κ l decreases from 1.17 W m −1 K −1 for the intrinsic sample to 0.72 W m −1 K −1 for the x = 0.5 sample at 300 K. Thanks to the synergistic effect of AgSnSe 2 addition, a larger ZT of 1.1 at 373 K is obtained in Bi 0.5Sb 1.5Te 3-0.4% AgSnSe 2, which is 1.45 times higher than that of the intrinsic sample.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal Radiation and Cooling Technologies · Thermal properties of materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Cooling, heating, generating power, and recovering waste heat with thermoelectric systems10.1126/science.1158899 ↗
2. Advanced thermoelectric design: from materials and structures to devices10.1021/acs.chemrev.0c00026 ↗
3. Thermoelectric cooling materials10.1038/s41563-020-00852-w ↗
4. Complex thermoelectric materials10.1038/nmat2090 ↗
5. Thermoelectric coolers for on-chip thermal management: Materials, design, and optimization10.1016/j.mser.2022.100700 ↗
6. Thermoelectric coolers: Infinite potentials for finite localized microchip cooling10.1016/j.jmst.2021.12.069 ↗
7. Advances in the design and assembly of flexible thermoelectric device10.1016/j.pmatsci.2022.101003 ↗
8. Research on bismuth telluride based thermoelectric semiconductor crystals
9. Harvesting waste heat with flexible Bi2Te3 thermoelectric thin film10.1038/s41893-022-01003-6 ↗
10. Effects of heavy deformation and annealing on the electrical properties of Bi2Te310.1063/1.1728990 ↗
11. Bi2Te3-based applied thermoelectric materials: research advances and new challenges10.1093/nsr/nwaa259 ↗
12. A comprehensive review on the effects of doping process on the thermoelectric properties of Bi2Te3 based alloys10.1016/j.jallcom.2022.163918 ↗
13. 2D hetero-nanosheets to enable ultralow thermal conductivity by all scale phonon scattering for highly thermoelectric performance10.1016/j.nanoen.2016.09.018 ↗
14. Synergistic texturing and Bi/Sb-Te antisite doping secure high thermoelectric performance in Bi0.5Sb1.5Te3-based thin films10.1002/aenm.202102578 ↗
15. Phonon engineering for thermoelectric enhancement of p-type bismuth telluride by a hot-pressing texture method10.1021/acsami.0c07376 ↗
16. Electric and mechanical performances of Bi0.5Sb1.5Te3 prepared by spark plasma sintering10.1016/S1001-0521(08)60087-X ↗
17. Unique nanostructures and enhanced thermoelectric performance of melt-spun BiSbTe alloys10.1063/1.3097026 ↗
18. High performance Bi2Te3 nanocomposites prepared by single-element-melt-spinning spark-plasma sintering10.1007/s10853-012-6895-z ↗
19. Synergistically optimized thermoelectric performance in Bi0.48Sb1.52Te3 by hot deformation and Cu doping10.1021/acsaem.9b01207 ↗
20. Enhanced thermoelectric figure-of-merit in p-type nanostructured bismuth antimony tellurium alloys made from elemental chunks10.1021/nl8009928 ↗
21. Dense dislocation arrays embedded in grain boundaries for high-performance bulk thermoelectrics10.1126/science.aaa4166 ↗
22. The influence of surface functionalization on the thermoelectric properties of carbon nanotube/Bi2Te3 composites10.1166/jnn.2016.13238 ↗
23. Effect of uniform dispersion of single-wall carbon nanotubes on the thermoelectric properties of BiSbTe-based nanocomposites10.1007/s11664-016-5095-z ↗
24. Effect of multiwall carbon nanotubes on the thermoelectric properties of BiSbTe based composites
25. Significant enhancement of thermoelectric figure of merit in BiSbTe-based composites by incorporating carbon microfiber10.1002/adfm.202008851 ↗
26. Effect of nano-SiC dispersion on thermoelectric properties of Bi2Te3 polycrystals
27. Preparation and properties of Nano-SiC dispersed Bi2Te3 thermoelectric materials
28. Thermoelectric characteristics of the p-type (Bi, Sb)2Te3 nanocomposites processed with silicon nanodispersion10.1166/jnn.2014.9421 ↗
29. Ultra-high thermoelectric performance in bulk BiSbTe/amorphous boron composites with nano-defect architectures10.1002/aenm.202000757 ↗
30. Organic/inorganic hybrid design as a route for promoting the Bi0.5Sb1.5Te3 for high-performance thermoelectric power generation10.1002/adfm.202200307 ↗
31. Ionized impurity scattering in nondegenerate semiconductors10.1103/PhysRev.104.1548 ↗
32. The role of ionized impurity scattering on the thermoelectric performances of rock salt AgPbmSnSe2+m10.1002/adfm.201600623 ↗
33. Doubling the ZT record of TiS2-based thermoelectrics by incorporation of ionized impurity scattering10.1039/C8TC00914G ↗
34. Carrier-filtering and phonon-blocking AgSnSe2-decorated grain boundaries to boost the thermoelectric performance of Cu2Sn0.9Co0.1S310.1039/D2NR05699B ↗
35. Electronic transport properties of the flash-evaporated p-type Bi0.5Sb1.5Te3 thermoelectric thin films10.1016/S0167-577X(00)00005-7 ↗
36. Nanoparticles in Bi0.5Sb1.5Te3: A prerequisite defect structure to scatter the mid-wavelength phonons between Rayleigh and geometry scatterings10.1016/j.actamat.2019.12.001 ↗
37. Enhanced thermoelectric performance of snte-based materials via interface engineering10.1021/acsami.1c16053 ↗
38. Approach to determine the density-of-states effective mass with carrier concentration-dependent seebeck coefficient10.1002/adfm.202203852 ↗
39. Estimation of the thermal band gap of a semiconductor from Seebeck measurements10.1007/s11664-999-0211-y ↗
40. Weighted mobility10.1002/adma.202001537 ↗
41. Band gap estimation from temperature dependent Seebeck measurement-Deviations from the 2e vertical bar S vertical bar T-max(max) relation10.1063/1.4905922 ↗
42. Weighted mobility ratio engineering for high-performance Bi-Te-based thermoelectric materials via suppression of minority carrier transport10.1002/adma.202005931 ↗
43. Characterization of Lorenz number with Seebeck coefficient measurement10.1063/1.4908244 ↗
44. Suppressed intrinsic excitation and enhanced thermoelectric performance in AgxBi0.5Sb1.5−xTe310.1039/C7TC04573E ↗
45. Lattice vibrations and heat transport in crystals and glasses10.1146/annurev.pc.39.100188.000521 ↗
46. Synergistic effect of band and nanostructure engineering on the boosted thermoelectric performance of n-Type Mg 3+δ(Sb, Bi)2 zintls10.1002/aenm.202201086 ↗