Carrier concentration and orientation optimization for high performance (Sb,Bi)2Te3 thermoelectric films via magnetron co-sputtering
Source abstract
Abstract
High performance flexible thermoelectric thin films are desired for power generation of flexible thermoelectric device. Thermoelectric performance of (Sb,Bi) 2Te 3 films are determined by the Te content in the matrix as anti-site defect dominates the carrier concentration. By controlling the Te target co-sputtering power, annealing temperature and time, not only the film in-plane orientation is enhanced, the carrier concentration is also effectively controlled in this work. Through a systematically investigation of Te content dependence of the thermoelectric performance, the carrier concentration and orientation is optimized through tuning Te content, and a high power factor of ∼32 μW/cm-K 2 for Sb 2Te 3 film, ∼36 μW/cm-K 2 for Bi 0.5Sb 1.5Te 3 film is realized in in-plane orientation. Besides, The thermal conductivity along in-plane direction is determined by photon-electro-thermal (TPET) technique, and the final zT values are ∼0.49 for Sb 2Te 3, and ∼0.58 for Bi 0.5Sb 1.5Te 3 films at room temperature, respectively.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal Radiation and Cooling Technologies · Thermal properties of materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Cooling, heating, generating power, and recovering waste heat with thermoelectric systems10.1126/science.1158899 ↗
2. Review of nanostructured devices for thermoelectric applications10.3762/bjnano.5.141 ↗
3. The panoscopic approach to high performance thermoelectrics10.1039/C3EE43099E ↗
4. Assembly‐free fabrication of high‐performance flexible inorganic thin‐film thermoelectric device prepared by a thermal diffusion10.1002/aenm.202202731 ↗
5. A review of the state of the science on wearable thermoelectric power generators (TEGs) and their existing challenges10.1016/j.rser.2017.01.177 ↗
6. Towards high integration and power density: Zigzag-type thin-film thermoelectric generator assisted by rapid pulse laser patterning technique10.1016/j.apenergy.2020.115404 ↗
7. Review of micro thermoelectric generator10.1109/JMEMS.2017.2782748 ↗
8. Modelling, fabrication and experimental testing of an heat sink free wearable thermoelectric generator10.1016/j.enconman.2017.04.096 ↗
9. A wearable thermoelectric generator fabricated on a glass fabric10.1039/c4ee00242c ↗
10. A review on recent developments of thermoelectric materials for room-temperature applications
11. High-performance flexible Bi2Te3 films based wearable thermoelectric generator for energy harvesting10.1016/j.energy.2019.03.060 ↗
12. High thermoelectric properties of (Sb, Bi)2Te3 nanowire arrays by tilt-structure engineering10.1016/j.apsusc.2018.02.193 ↗
13. High thermoelectric performance of p-type Bi(0.4)Sb(1.6)Te(3+x) synthesized by plasma-assisted ball milling10.1021/acsami.2c16646 ↗
14. New insights into intrinsic point defects in V(2)VI(3) thermoelectric materials
15. Complex thermoelectric materials10.1038/nmat2090 ↗
16. The thermoelectric properties of bismuth telluride10.1002/aelm.201800904 ↗
17. Growth and transport properties of oriented bismuth telluride films10.1016/j.jallcom.2011.02.123 ↗
18. Fabrication of highly (00l)-textured Sb2Te3 film and corresponding thermoelectric device with enhanced performance10.1007/s11664-012-2214-3 ↗
19. Experimental realization of a topological p-n junction by intrinsic defect grading10.1002/adma.201504771 ↗
20. Enhanced thermoelectric properties and layered structure of Sb2Te3 films induced by special (00l) crystal plane10.1016/j.cplett.2013.08.084 ↗
21. Tuning the temperature domain of phonon drag in thin films by the choice of substrate10.1103/PhysRevLett.111.046803 ↗
22. A comprehensive review on Bi2Te3‐based thin films: thermoelectrics and beyond, Interdisciplinary
23. Multifold improvement of thermoelectric power factor by tuning bismuth and antimony in nanostructured n-type bismuth antimony telluride thin films10.1016/j.matdes.2018.107549 ↗
24. Harvesting waste heat with flexible Bi2Te3 thermoelectric thin film10.1038/s41893-022-01003-6 ↗
25. Synergistic texturing and Bi/Sb‐Te antisite doping secure high thermoelectric performance in Bi0.5Sb1.5Te3‐based thin films10.1002/aenm.202102578 ↗
26. Enhancement in thermoelectric properties of Te-embedded Bi2Te3 by preferential phonon scattering in heterostructure interface10.1016/j.nanoen.2018.03.009 ↗
27. Effects of annealing temperature on thermoelectric properties of Bi2Te3 films prepared by co-sputtering10.1016/j.apsusc.2013.03.130 ↗
28. Thermoelectric properties of n-type Bi–Te thin films with various compositions10.1016/j.mee.2010.06.019 ↗
29. Synergetic combination of Te content and deposition temperature to optimize thermoelectric properties using sputtered bismuth telluride films10.1016/j.jallcom.2016.08.162 ↗
30. Electronic structure of the thermoelectric materials Bi2Te3 and Sb2Te3 from first-principles calculations
31. High thermoelectric performance in (Bi0.25Sb0.75)2Te3 due to band convergence and improved by carrier concentration control
32. Transport properties of thermoelectric Bi0.5Sb1.5Te3 and Bi2Te2.7Se0.3 thin films10.1016/j.jallcom.2014.01.172 ↗
33. Optimization of annealing conditions to enhance thermoelectric performance of electrodeposited p-type BiSbTe thin films10.1063/1.5049586 ↗
34. Room-temperature MBE deposition, thermoelectric properties, and advanced structural characterization of binary Bi2Te3 and Sb2Te3 thin films10.1016/j.jallcom.2012.01.108 ↗
35. An overview of thermoelectric films: fabrication techniques, classification, and regulation methods10.1088/1674-1056/27/4/047210 ↗
36. Thermoelectric characteristics of n-Type Bi2Te3 and p-Type Sb2Te3 thin films prepared by Co-evaporation and annealing for thermopile sensor applications10.2320/matertrans.M2013010 ↗
37. High-performance screen-printed thermoelectric films on fabrics10.1038/s41598-017-07654-2 ↗
38. Enhancing thermoelectric properties of Sb2Te3 flexible thin film through microstructure control and crystal preferential orientation engineering10.1016/j.apsusc.2017.04.074 ↗
39. Towards high refrigeration capability: the controllable structure of hierarchical Bi0.5Sb1.5Te3 flakes on a metal electrode10.1039/C4CP05386A ↗
40. [Bi]:[Te] Control, structural and thermoelectric properties of flexible BixTey thin films prepared by RF magnetron sputtering at different sputtering pressures10.1007/s11664-017-5671-x ↗
41. Apparatus for seebeck coefficient and electrical resistivity measurements of bulk thermoelectric materials at high temperature10.1063/1.1835631 ↗
42. Flexible pCu2Se-nAg2Se thermoelectric devices via in situ conversion from printed Cu patterns10.1016/j.cej.2022.135172 ↗
43. Nanoporous (00l)-oriented Bi2Te3 nanoplate film for improved thermoelectric performance10.1016/j.jallcom.2020.154239 ↗
44. Thickness dependence of the electrical and thermoelectric properties of co-evaporated Sb2Te3 films10.1016/j.apsusc.2017.09.037 ↗
45. Directional thermal diffusion realizing inorganic Sb2Te3/Te hybrid thin films with high thermoelectric performance and flexibility10.1002/adfm.202207903 ↗
46. Rational composition and structural control for enhancing thermoelectric properties in p‐Type Bi0.4Sb1.6Te3 thin films
47. Effects of thickness on thermoelectric properties of Bi0.5Sb1.5Te3 thin films10.1007/s13204-020-01441-8 ↗
48. Interface-mediated extremely low thermal conductivity of graphene aerogel10.1016/j.carbon.2015.11.033 ↗
49. High thermoelectric performance of p-type Bi0.5Sb1.5Te3 films on flexible substrate10.1016/j.matchemphys.2020.123427 ↗