journal article·2023-07

Hot deformation behavior of a novel Ni–W–Co high-density Ni-based alloy with ultra-high W content

Xin Zhao, Jinjuan Lv, Hongliang Liu, Lei Zheng

Publisher page

Abstract

Ni–W–Co alloy is a recently developed single-phase Ni-based alloy with high density. An ultra-high content of W (35–38 wt%) is essential to ensure the high density but unfavorable to possess outstanding ductility or present large deformation. In this study, the flow stress behavior and hot workability of Ni–W–Co alloy were investigated through simulated compression tests with a temperature range of 1000–1300 °C and strain rate range of 0.01–5 s −1 . The Arrhenius-type constitutive equation at peak stress was established. The constitutive equation displays prediction bias due to the lower experimental values at low temperature and high strain rate. The ultra-high solution content of W not only results in the severely inhibited discontinuous dynamic recrystallization (DDRX) and high apparent deformation activation energy (568.5 kJ/mol) but also promotes the generation of subgrain boundaries. Furthermore, continuous dynamic recrystallization (CDRX) occurs during deformation at a low temperature and a high strain rate, which is quite different from the Ni-based alloy with a low W content that only DDRX occurs. The activation of CDRX shortens the stage at which work hardening dominates, and results in lower peak stress values. The prediction bias of the constitutive equation caused by the lower peak stress was eliminated through difference compensation. The hot processing maps at strain values of 0.3, 0.5, 0.7, and 0.9 were constructed. The optimal hot processing parameters of the Ni–W–Co alloy, which aims to obtain full recrystallization microstructure without defects, are strain rate 0.01–0.1 s −1 and temperature 1225–1300 °C in combination with the hot processing maps and microstructure evolution. This study provides a reference for the hot processing and microstructural modification of the novel Ni–W–Co alloy with an ultra-high W content.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgy and Material Forming · Advanced materials and composites · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Microstructure characteristics and mechanical properties of a novel heavy density Ni–W–Co matrix alloy prepared by VIM/VAR10.1016/j.jmrt.2021.05.060 ↗
2. Effect of carbon addition on microstructure and mechanical properties of as-cast nickel-based heavy density matrix alloy reinforced by high tungsten content10.1016/j.jallcom.2021.162464 ↗
3. The deformation behaviors and mechanism of the high-temperature mechanical properties of a Ni48W35Co17 alloy10.3390/met11111755 ↗
4. Characteristics and evolution behavior of non-metallic inclusions in a novel Ni–W–Co heavy-density alloy manufactured by VIM/VAR10.1007/s11663-021-02413-1 ↗
5. Microstructure and texture of a novel hot-stamped high-density Ni-Co-W alloy10.1088/2053-1591/ac5f8c ↗
6. Research on feasibility of several high density materials for EFP liner and material selection criteria10.1002/prep.201600141 ↗
7. Effect of precipitates on high-temperature tensile strength of a high W-content cast Ni-based superalloy10.1016/j.jallcom.2019.05.085 ↗
8. Dynamic recrystallization and hot-working characteristics of Ni-based alloy with different tungsten content10.3390/met9030298 ↗
9. Humphreys · 2012
10. The effect of solute on discontinuous dynamic recrystallization10.1016/j.actamat.2012.08.021 ↗
11. On the development of instability criteria during hotworking with reference to IN 71810.1016/S0921-5093(98)00764-3 ↗
12. Processing maps: a status report10.1361/105994903322692420 ↗
13. Hot deformation characteristics and processing map analysis of a new designed nickel-based alloy for 700 °C A-USC power plant10.1016/j.jallcom.2015.09.219 ↗
14. Hot deformation characterization of nickel-based superalloy UNS10276 through processing map and microstructural studies10.1016/j.jallcom.2016.10.029 ↗
15. Characterization of hot deformation behavior of Haynes230 by using processing maps10.1016/j.jmatprotec.2008.09.024 ↗
16. Hot working characteristic of as-cast and homogenized Ni–Cr–W superalloy10.1016/j.msea.2008.12.032 ↗
17. High-throughput exploration of the composition-dependent elasto-plastic properties in Co–Ni–W system10.1016/j.jallcom.2021.163061 ↗
18. High-throughput determination of the composition-dependent mechanical and diffusion properties in β Ti–Nb–Zr–Hf refractory alloys10.1016/j.jallcom.2021.160150 ↗
19. Recrystallization and associated twinning evolution in Nickel-based GH4141 superalloy during annealing10.1007/s11665-020-05315-6 ↗
20. Effect of stacking fault energy on mechanical properties and annealing behavior of brasses10.1016/j.jallcom.2016.04.083 ↗
21. Work hardening and texture during compression deformation of the Al–Si–Cu–Mg alloy modified with V, Zr and Ti10.1016/j.jallcom.2013.12.081 ↗
22. A new method for evaluation of friction in bulk metal forming10.1016/j.jmatprotec.2004.03.029 ↗
23. Hot deformation behavior and processing workability of a Ni-based alloy10.1016/j.jallcom.2018.08.010 ↗
24. The Portevin–Le Chatelier effect: a review of experimental findings10.1088/1468-6996/12/6/063001 ↗
25. Dynamic strain aging mechanisms in a metastable austenitic stainless steel10.1016/j.actamat.2021.116888 ↗
26. Strength and structure under hot-working conditions10.1179/095066069790138056 ↗
27. On the mechanism of hot deformation10.1016/0001-6160(66)90207-0 ↗
28. Constitutive equations for high temperature flow stress of aluminium alloys10.1179/mst.1997.13.3.210 ↗
29. Unique deformation behavior and microstructure evolution in high temperature processing of HfNbTaTiZr refractory high entropy alloy10.1016/j.actamat.2019.04.018 ↗
30. Effect of competing hardening and softening mechanisms on the flow stress curve modeling of ultra-low carbon steel at high temperatures10.1016/S0924-0136(03)00620-4 ↗
31. A one-parameter approach to determining the critical conditions for the initiation of dynamic recrystallization10.1016/1359-6454(95)00146-7 ↗
32. Kinetics of flow and strain-hardening10.1016/0001-6160(81)90112-7 ↗
33. Plastic strain in metals
34. G.I. Taylor, The mechanism of plastic deformation of crystals. Part I.—Theoretical, Proc. R. Soc. Lond. Ser. A Contain. Pap. Math. Phys. Charact. 145 (1934) 362–387. https://doi.org/10.1098/rspa.1934.0106.10.1098/rspa.1934.0106 ↗
35. Work hardening characteristics and microstructural evolution during hot deformation of a nickel superalloy at moderate strain rates10.1016/j.jallcom.2017.03.158 ↗
36. A review of dynamic recrystallization phenomena in metallic materials10.1016/j.matdes.2016.09.012 ↗
37. Nucleation and microtexture development under dynamic recrystallization of copper10.1016/S0921-5093(01)01336-3 ↗
38. Mechanisms of DRX nucleation with grain boundary bulging and subgrain rotation during the hot working of nickel-based superalloys with columnar grains10.1016/j.jallcom.2019.01.334 ↗
39. The physical interpretation of the activation energy for hot deformation of Ni and Ni–30Cu alloys10.1557/jmr.2016.81 ↗
40. Hot working characteristics of cobalt in the temperature range 600–950° C10.1016/j.scriptamat.2008.09.012 ↗
41. Dynamic recrystallization of a biomedical Co–Cr–W-based alloy under hot deformation10.1016/j.msea.2013.11.002 ↗
42. Modelling the transition from discontinuous to continuous dynamic recrystallization with decreasing purity in aluminium10.2320/matertrans1989.41.109 ↗
43. Effects of alloying element and temperature on the stacking fault energies of dilute Ni-base superalloys10.1088/0953-8984/24/50/505403 ↗
44. Effect of stacking fault energy on the restoration mechanisms and mechanical properties of friction stir welded copper alloys10.1016/j.matdes.2018.11.050 ↗
45. Hot workability and microstructure control in Monel®400 (Ni–30Cu) alloy: an approach using processing map, constitutive equation and deformation modeling10.1016/j.msea.2021.141855 ↗
46. A study on the effect of strain rate on the dynamic recrystallization mechanism of alloy 617B10.1007/s11661-016-3664-7 ↗
47. Influence of strain rate on subsolvus dynamic and post-dynamic recrystallization kinetics of Inconel 71810.1016/j.actamat.2019.05.061 ↗
48. Hot deformation characteristics and processing map analysis for Nickel-based corrosion resistant alloy10.1016/j.jallcom.2014.10.034 ↗
49. Modeling of flow stress of 42CrMo steel under hot compression10.1016/j.msea.2007.11.119 ↗
50. Effect of strain rate upon plastic flow of steel10.1063/1.1707363 ↗