Effects of heat treatment on the microstructures and magnetic properties of selective laser melted Fe-3 wt%Si functional soft magnet
Source abstract
Abstract
Dense selective laser melted (SLMed) Fe-3 wt%Si soft magnet with a very low porosity below 0.5% was obtained successfully. In the present work, the effects of heat treatment on the microstructures and magnetic properties were evaluated. The soft magnet exhibited a typical columnar structure with an oriented growth of building direction (BD) and a< 001 > texture along the BD. The magnet samples before and after post-treatment mainly consisted of a Bcc-Fe phase. Annealing the samples at 750 °C and 850 °C for 3 h did not affect the grain size significantly, the diffusion rate was just sufficient to bring Si segregations into solid solution . When annealing was conducted at 1000 °C for 3 h, resulting in marked grain growth and stress relief. The texture after annealing at 1000 °C for 3 h was the same as that as-built sample,< 001 > was still along the BD. Within the cases of this work, the internal stress of the SLMed parts could be relieved by annealing heat treatment, and it could be further released with the increase of annealing temperature or extension of annealing time. The magnetic properties of the SLMed Fe-3 wt%Si magnet were enhanced comprehensively.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Magnetic Properties of Alloys · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Soft magnetic materials for a sustainable and electrified world10.1126/science.aao0195 ↗
2. Magnetic materials and devices for the 21st century: stronger, lighter, and more energy efficient10.1002/adma.201002180 ↗
3. G.M. Size, Share & Trends Analysis Report By Application (Electronics, Composites, Energy), By Product (Graphene Nanoplatelets, Graphene Oxide), By Region, And Segment Forecasts, 2020–2027, Accesed from https://www.grandviewresearch.com/industry-analysis/graphene-industry#:∼:text=The%20global%20graphene%20market%20size,to%20drive%20the%20product% 20demand. On, 28 (2020).
4. Modern soft magnets: amorphous and nanocrystalline materials10.1016/j.actamat.2012.10.040 ↗
5. Energy applications of magnetocaloric materials10.1002/aenm.201903741 ↗
6. 3D Printing of functional magnetic materials: from design to applications10.1002/adfm.202102777 ↗
7. Effect of building directions on the surface roughness, microstructure, and tribological properties of selective laser melted Inconel 62510.1016/j.jmatprotec.2020.116878 ↗
8. Heat treatment induced microstructural evolution, oxidation behavior and tribological properties of Fe-12Cr-9Ni-2Al steel (CX steel) prepared using selective laser melting10.1016/j.surfcoat.2021.127982 ↗
9. Design for additive manufacturing
10. Additive manufacturing and topology optimization of magnetic materials for electrical machines—a review10.3390/en14020283 ↗
11. A review of selective laser melting of aluminum alloys: processing, microstructure, property and developing trends10.1016/j.jmst.2018.09.004 ↗
12. Influence of the pore size and porosity of selective laser melted Ti6Al4V ELI porous scaffold on cell proliferation, osteogenesis and bone ingrowth10.1016/j.msec.2019.110289 ↗
13. Magnetic properties of in-situ synthesized FeNi3 by selective laser melting Fe-80% Ni powders10.1016/j.jmmm.2013.02.014 ↗
14. Microstructure and magnetic properties of Fe–Ni alloy fabricated by selective laser melting Fe/Ni mixed powders10.1016/j.jmst.2013.05.001 ↗
15. Magnetic properties of Fe–Ni permalloy produced by selective laser melting10.1016/j.jallcom.2019.152315 ↗
16. Controlling the grain orientation during laser powder bed fusion to tailor the magnetic characteristics in a Ni-Fe based soft magnet10.1016/j.actamat.2018.07.064 ↗
17. Magnetic shielding promotion via the control of magnetic anisotropy and thermal Post processing in laser powder bed fusion processed NiFeMo-based soft magnet
18. Relationship between laser energy input, microstructures and magnetic properties of selective laser melted Fe-6.9% wt Si soft magnets10.1016/j.matchar.2018.01.016 ↗
19. Metallurgy of high-silicon steel parts produced using Selective Laser Melting10.1016/j.actamat.2016.03.037 ↗
20. Effect of the laser scan rate on the microstructure, magnetic properties, and microhardness of selective laser-melted FeSiB10.1007/s10948-018-4621-z ↗
21. Influence of scan pattern and geometry on the microstructure and soft-magnetic performance of additively manufactured Fe-Si
22. Effect of laser energy density on surface morphology, microstructure, and magnetic properties of selective laser melted Fe-3wt% Si alloys
23. Properties of soft magnetic Fe-Co-V alloy produced by laser powder bed fusion10.1108/RPJ-06-2018-0136 ↗
24. Additive manufacturing methods for soft magnetic composites (SMCs)10.1017/S1431927618005810 ↗
25. Additive manufacturing of soft magnetic materials and components
26. Microstructure and magnetic properties of FeSiBCrC soft magnetic alloy manufactured by selective laser melting10.1016/j.matlet.2021.129469 ↗
27. Laser Additive Manufacturing of Fe-Based Magnetic Amorphous Alloys10.3390/magnetochemistry7020020 ↗
28. Selective laser melting vitrification of amorphous soft magnetic alloys with help of double-scanning-induced compositional homogeneity10.1016/j.matlet.2019.127068 ↗
29. Calorimetric study and microstructure analysis of the order-disorder phase transformation in silicon steel built by SLM10.1016/j.jallcom.2017.06.085 ↗
30. Effect of annealing on the microstructure and magnetic properties of soft magnetic Fe-Si produced via laser additive manufacturing10.1016/j.scriptamat.2017.08.042 ↗
31. Role of Scan Strategies and Heat Treatment on Grain Structure Evolution in Fe-Si Soft Magnetic Alloys made by Laser–Powder Bed Fusion
32. Design and performance of an additively manufactured high-Si transformer core10.1016/j.matdes.2020.108894 ↗
33. I. ISO, ASTM 52921: 2013. Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies, International Organization for Standardization: Geneva, Switzerland, (2013).
34. Effect of laser energy density on surface morphology, microstructure, and magnetic properties of selective laser melted Fe-3wt% Si alloys10.1007/s11665-021-05591-w ↗
35. Effect of recrystallization annealing temperature on microstructure, texture and magnetic properties of non-oriented silicon steel produced by strip casting10.1016/j.proeng.2017.10.1116 ↗
36. Electron imaging with an EBSD detector10.1016/j.ultramic.2014.10.002 ↗
37. O. Kubaschewski, Iron—Binary phase diagrams, Springer Science & Business Media, 2013.
38. The effect of heat treatments and Si contents on B2 ordering reaction in high-silicon steels10.1016/S0921-5093(00)01960-2 ↗
39. J.A. Dantzig, M. Rappaz, Solidification: -Revised & Expanded, EPFL press, 2016.
40. Correlation between solidification parameters and weld microstructures10.1179/imr.1989.34.1.213 ↗
41. The role of side-branching in microstructure development in laser powder-bed fusion10.1038/s41467-020-14453-3 ↗
42. Additive manufacturing of Ni-based superalloys: the outstanding issues10.1557/mrs.2016.211 ↗
43. Effect of different heat treatments on the microstructure and mechanical properties in selective laser melted INCONEL 718 alloy10.1080/10426914.2016.1257805 ↗
44. A multiscale understanding of the thermodynamic and kinetic mechanisms of laser additive manufacturing10.1016/J.ENG.2017.05.011 ↗
45. Effects by the microstructure after hot and cold rolling on the texture and grain size after final annealing of ferritic non-oriented FeSi electrical steel10.1063/1.4993526 ↗
46. The metallurgy and processing science of metal additive manufacturing10.1080/09506608.2015.1116649 ↗
47. Effect of annealing on the microstructure and magnetic properties of soft magnetic Fe-Si produced via laser additive manufacturing10.1016/j.scriptamat.2017.08.042 ↗
48. Recent advances in rapidly solidified soft magnetic materials10.1016/0304-8853(90)90552-2 ↗
49. C.-W. Chen, Magnetism and metallurgy of soft magnetic materials, Courier Corporation, 2013.
50. Effects of annealing on the magnetic properties of Fe–6.5% Si
51. B.D. Cullity, C.D. Graham, Introduction to magnetic materials, John Wiley & Sons, 2011.