journal article·2023-07

Influence of nanocrystalline Fe-based powder particles size on the magnetic performance of soft magnetic composites for high frequency applications

P. Błyskun, M. Kowalczyk, G. Łukaszewicz, M. Nowicki, A. Kolano-Burian, P. Gazda, P. Nowak

Publisher page

Abstract

The soft magnetic composite (SMC) toroidal cores were prepared by the compaction method from ball-milled Fe-Si-B-Nb-Cu nanocrystalline ribbon with 20 vol% (3.7 wt%) resin addition as a binder. The objective of this work was to study their internal structure and magnetic performance at high excitation frequency. The computed tomography results showed that 70–80 vol% of ferromagnetic phase content was present in all samples, depending on the porosity. These composites exhibited much higher permeability and lower core loss at high frequency than the reference sample made of Somaloy® which contained almost 100 vol% of ferromagnetic phase. They exhibited constant level of permeability in the entire measurement range. The influence of the powder size fraction on the magnetic properties was determined as well. It appeared that coarser particles result in higher permeability and it can be increased even further by mixing the coarsest powder size fraction with the finest one. The presented results show that these materials are very attractive for high frequency applications.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · Magnetic Properties of Alloys · Magnetic Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Magnetic materials and devices for the 21st century: stronger, lighter, and more energy efficient10.1002/adma.201002180 ↗
2. Soft magnetic composites: recent advancements in the technology10.1016/j.mprp.2016.08.003 ↗
3. Structure and magnetic properties of ZrO2-coated Fe powders and Fe/ZrO2 soft magnetic composites10.1016/j.apt.2017.04.029 ↗
4. Enhanced soft magnetic properties of the Fe-based amorphous powder cores with novel TiO2 insulation coating layer10.1016/j.jmmm.2018.11.014 ↗
5. Microstructure and magnetic properties of novel powder cores composed of iron-based amorphous alloy and PTFE10.1007/s10853-022-07199-4 ↗
6. Somaloy, powders for electromagnetic applications, https://www.hoganas.com/en/powder-technologies/soft-magnetic-composites/products/coated-powders-for-electromagnetic-applications/ (accessed 14.10.2022).
7. Powder composite cores of nanocrystalline soft magnetic FeSiB-CuNb10.1016/S0304-8853(98)00747-1 ↗
8. R. Nowosielski, J.J. Wysłocki, I. Wnuk, P. Gramatyka, Nanocrystalline soft magnetic composite cores, J. Mater. Process. Technol. 175 (2006) 324–329. http://doi:10.1016/j.jmatprotec.2005.04.017.10.1016/j.jmatprotec.2005.04.017 ↗
9. C. Beatrice, S. Dobák, E. Ferrara, F. Fiorillo, C. Ragusa, J. Füzer, P. Kollár, Broadband magnetic losses of nanocrystalline ribbons and powder cores, J. Magn. Magn. Mater. 420 (2016) 317–323. https://doi.org/10.1016/j.jmmm.2016.07.045.10.1016/j.jmmm.2016.07.045 ↗
10. Interplay of crystallization, stress relaxation and magnetic properties for FeCuNbSiB soft magnetic composites10.1016/j.jallcom.2016.02.239 ↗
11. Crystal-like microstructural Finemet/FeSi compound powder core with excellent soft magnetic properties and its loss separation analysis10.1016/j.matdes.2020.108769 ↗
12. High permeability and low core loss nanocrystalline soft magnetic composites based on FeSiBNbCu@Fe3O4 powders prepared by, HNO3 oxidation10.1016/j.matchemphys.2021.124427 ↗
13. Influence of particles size fraction on magnetic properties of soft magnetic composites prepared from a soft magnetic nanocrystalline powder with no synthetic oxide layer10.1016/j.mseb.2021.115357 ↗
14. Tomography based numerical simulation of the demagnetizing field in soft magnetic composites10.1063/1.4917490 ↗
15. J. Crangle, The Magnetic Properties of Solids, The Structures and Properties of Solids 6, Edward Arnold (Publishers) Limited, London, 1977.
16. Robert · 1988
17. Ferromagnetic composites with polymer matrix consisted of nanocrystalline Fe-based filler10.1016/j.jmmm.2015.04.004 ↗
18. Dependence of demagnetizing fields in Fe-based composite materials on magnetic particle size and the resin content10.1016/j.jmmm.2015.04.008 ↗
19. The effect of particle size on the core losses of soft magnetic composites10.1063/1.5080079 ↗
20. FeSiCr alloy powder to carbonyl iron powder mixing ratio effects on the magnetic properties of the iron-based alloy powder cores prepared using screen printing10.3390/ma14041034 ↗
21. S. Tumański, Handbook of Magnetic Measurements, CRC Press, 2019.
22. Soft magnetic mouldable composites: properties and applications10.1016/j.jmmm.2012.03.049 ↗
23. Eco-friendly soft magnetic composites of iron coated by sintered ferrite via mechanofusion10.1016/j.jmmm.2021.168627 ↗
24. In-situ formation of Fe3O4 and ZrO2 coated Fe-based soft magnetic composites by hydrothermal method10.1016/j.ceramint.2018.11.058 ↗
25. Effect of annealing on magnetic properties of Fe/Fe3O4 soft magnetic composites prepared by in-situ oxidation and hydrogen reduction methods10.1016/j.jallcom.2018.11.184 ↗
26. Preparation and characterization of iron-based soft magnetic composites with resin bonded nano-ferrite insulation10.1016/j.jallcom.2020.154416 ↗