Effect of annealing on the properties of plasma-enhanced atomic layer deposition grown HfO2 coatings for ultraviolet laser applications
Source abstract
Abstract
HfO 2 monolayer coatings are grown by plasma-enhanced atomic layer deposition (PEALD), and the effects of the thermal annealing atmosphere and temperature on the surface morphology, crystal structure, chemical composition, optical absorption, and laser-induced damage threshold (LIDT) of the HfO 2 monolayer coatings are investigated. The experimental results show that annealing in an oxygen atmosphere is more beneficial to the decomposition of impurity compounds (carbonates and amines) and the elimination of oxygen deficiency in HfO 2 coating than in a nitrogen atmosphere. Compared to the as-deposited coating, the HfO 2 coating annealed under an oxygen atmosphere and specific temperature has lower C and N impurity contents, a better stoichiometric ratio, and thus lower absorption and higher LIDT. The highest LIDT (at 355 nm) of 6.3 J/cm 2 is obtained at an annealing temperature of 700 ℃, which is approximately three times that of the as-deposited coating. We believe that this experimental result can help improve the LIDT of PEALD-grown oxide coatings or other oxide coatings containing similar impurities.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Semiconductor materials and devices · Electronic and Structural Properties of Oxides · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Inertial-confinement fusion with lasers10.1038/nphys3736 ↗
2. Recent trends in laser cladding and surface alloying10.1016/j.optlastec.2020.106619 ↗
3. Review of selective laser melting: Materials and applications10.1063/1.4935926 ↗
4. Nanolaminate-based design for UV laser mirror coatings10.1038/s41377-020-0257-4 ↗
5. Materials for optical coatings in the ultraviolet10.1364/AO.24.000496 ↗
6. A nodule dome removal strategy to improve the laser-induced damage threshold of coatings10.1017/hpl.2022.24 ↗
7. Post-treatment of 351 nm SiO2 antireflective coatings for high power laser systems prepared by the sol-gel method10.3788/COL202220.011601 ↗
8. Absolute absorption measurements in optical coatings by laser induced deflection10.3390/coatings9080473 ↗
9. 355-nm absorption in HfO2 and SiO2 monolayers with embedded Hf nanoclusters studied using photothermal heterodyne imaging10.1117/12.981642 ↗
10. High temperature annealing effects on spectral, microstructural and laser damage resistance properties of sputtered HfO2 and HfO2-SiO2 mixture-based UV mirrors10.1016/j.optmat.2019.109245 ↗
11. Atomic layer deposition: an overview10.1021/cr900056b ↗
12. Atomic layer-deposited nanostructures and their applications in energy storage and sensing10.1557/jmr.2019.329 ↗
13. Atomic layer deposition of two-dimensional layered materials: processes, growth mechanisms, and characteristics10.1016/j.matt.2019.12.026 ↗
14. Conformality in atomic layer deposition: Current status overview of analysis and modelling10.1063/1.5060967 ↗
15. Optical and laser damage properties of HfO2/Al2O3 thin films deposited by atomic layer deposition10.1016/j.jallcom.2015.11.048 ↗
16. Atomic layer deposition of Al2O3 and HfO2 for high power laser application10.1016/j.jallcom.2020.157751 ↗
17. Tuning material properties of oxides and nitrides by substrate biasing during plasma-enhanced atomic layer deposition on planar and 3D substrate topographies10.1021/acsami.8b00183 ↗
18. Status and prospects of plasma-assisted atomic layer deposition10.1116/1.5088582 ↗
19. HfO2/SiO2 anti-reflection films for UV lasers via plasma-enhanced atomic layer deposition10.1016/j.jallcom.2020.157875 ↗
20. Role of HfO2/SiO2 thin-film interfaces in near-ultraviolet absorption and pulsed laser damage10.1117/1.OE.56.1.011004 ↗
21. Investigation on HfO2 properties grown by ALD using TDMAH as precursor10.1016/j.vacuum.2022.111243 ↗
22. ALD and PEALD deposition of HfO2 and its effects on the nature of oxygen vacancies10.1016/j.mseb.2022.115964 ↗
23. Temperature-Dependent HfO2/Si Interface Structural Evolution and its Mechanism
24. Stabilization of Tetragonal HfO2 under Low Active Oxygen Source Environment in Atomic Layer Deposition10.1021/cm3001199 ↗
25. Annealing effects on microstructure and laser-induced damage threshold of HfO2/SiO2 multilayer mirrors10.1364/AO.55.006108 ↗
26. A comparative study of the influence of different post-treatment methods on the properties of HfO2 single layers10.1016/j.optlastec.2008.10.013 ↗
27. Effect of annealing on the damage threshold and optical properties of HfO2/Ta2O5/SiO2 high-reflection film10.3788/COL201917.113101 ↗
28. Effect of annealing on properties and performance of HfO2/SiO2 optical coatings for UV-applications10.1364/OE.453345 ↗
29. Amorphous hafnium oxide thin films for antireflection optical coatings10.1016/j.surfcoat.2007.07.095 ↗
30. Effect of heat treatment on properties of HfO2 film deposited by ion-beam sputtering10.1016/j.optmat.2017.07.048 ↗
31. Effects of hot-isostatic pressing and annealing post-treatment on HfO2 and Ta2O5 films prepared by ion beam sputtering10.1016/j.ijleo.2017.05.047 ↗
32. Effect of annealing on the properties of HfO2-Al2O3 mixture coatings for picosecond laser applications10.1016/j.apsusc.2021.152192 ↗
33. Investigation of thermal annealing effects on microstructural and optical properties of HfO2 thin films10.1016/j.apsusc.2006.06.005 ↗
34. Influence of annealing temperature on the performance of TiO2/SiO2 nanolaminated films10.3788/COL202119.121406 ↗
35. Properties of atomic layer deposited HfO2 thin films10.1016/j.tsf.2009.04.033 ↗
36. Physical properties and electrical characteristics of H2O-based and O3-based HfO2 films deposited by ALD10.1016/j.microrel.2012.01.010 ↗
37. Microstructure, optical, electrical properties, and leakage current transport mechanism of sol-gel-processed high-k HfO2 gate dielectrics10.1016/j.ceramint.2016.01.050 ↗
38. Absorption measurement for coatings using surface thermal lensing technique10.1117/12.607475 ↗
39. Laser damage thresholds of optical coatings10.1016/j.tsf.2009.07.150 ↗
40. Effect of annealing temperature on the microstructure and optical properties of lanthanum-doped hafnium oxide10.3390/coatings12040439 ↗
41. Atomic layer deposition of HfO2 thin films employing a heteroleptic hafnium precursor10.1002/cvde.201106934 ↗
42. Influence of the negative R.F. bias voltage on the structural, mechanical and electrical properties of Hf–C–N coatings10.1016/j.surfcoat.2015.12.050 ↗
43. Structure, mechanical and tribological properties of HfCx films deposited by reactive magnetron sputtering10.1016/j.apsusc.2014.11.130 ↗
44. Amination of poly(ether imide) membranes using di- and multivalent amines10.1002/macp.200390016 ↗
45. XPS of nitrogen-containing functional groups on activated carbon10.1016/0008-6223(95)00030-H ↗
46. PEALD of HfO2 thin films: precursor tuning and a new near-ambient-pressure XPS approach to in situ examination of thin-film surfaces exposed to reactive gases10.1021/acsami.9b07090 ↗
47. Plasma-enhanced atomic layer deposition of HfO2 with substrate biasing: thin films for high-reflective mirrors10.1021/acsami.1c21889 ↗
48. The ablation of Ta2O5 film by pulsed nanosecond Gaussian laser beams10.1016/j.ijleo.2015.05.127 ↗
49. Nitrogen and oxygen annealing effects on properties of aluminum-gallium oxide films grown by pulsed laser deposition10.1016/j.ceramint.2020.06.194 ↗
50. Development of high-power laser coatings10.1017/hpl.2013.6 ↗