journal article·2023-04

Effect of Al/Ni ratio on phase, microstructure and mechanical properties of the Al CrFeMnNi2- high entropy alloys

Tianxiang Wang, Yanxin Wu, Yonggang Yang, Shiwei Tian, Yefei Zhang, Haitao Jiang

Publisher page

Abstract

In this work, the as-cast Al xCrFeMnNi 2-x ( x = 0.3, 0.7, 1.0) high-entropy alloys (HEAs) were designed via the empirical criterion and equilibrium phase diagrams, and the effect of Al/Ni ratio on the microstructure and mechanical properties was investigated and discussed. An increase of Al/Ni ratio promotes the matrix phase transition from FCC to BCC phase, this mainly is attributed to the decrease of VEC. No matter it is in FCC- or BCC-dominant HEAs, the ordered B2 phase (rich-Al and Ni) always appears together with the BCC phase, but the morphology of which translates from spherical-shape to cubical-shape, and to the weave-like microstructure due to the increase of the lattice misfit constant ε. The alloy ( x = 0.3) is composed of FCC matrix phase with a small amount of BCC and spherical B2 precipitates, which exhibits favorable total ductility (∼80 %), but low yield strength (∼304 MPa); An increase of Al/Ni ratio results in the increase of the yield strength, but the decrease of the ductility. The alloy ( x = 0.7) consists of the BCC matrix phase with trimodal (r-p, c-p, and s-p) distribution of B2 precipitates, which exhibits the optimal mechanical properties with the yield strength (∼1158 MPa) and a relatively high total ductility (∼50 %). Further increase of Al/Ni ratio does not influence the strength considerably, but decreases the total ductility sharply. The alloy ( x = 1.0) presents a yield strength (∼1119 MPa) close to that of the alloy ( x = 0.7), while the ductility is very low (∼10 %). It is mainly attributed to the spinodal weave-like microstructure, which is prone to the initiation and propagation of cracks.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (61)

Show source-provided references
1. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
2. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
3. High-entropy alloys10.1038/s41578-019-0121-4 ↗
4. Science and technology in high-entropy alloys10.1007/s40843-017-9195-8 ↗
5. Mechanical behavior of high-entropy alloys10.1016/j.pmatsci.2021.100777 ↗
6. High‐entropy alloys: potential candidates for high‐temperature applications–an overview10.1002/adem.201700645 ↗
7. Designing nanoparticles-strengthened high-entropy alloys with simultaneously enhanced strength-ductility synergy at both room and elevated temperatures10.1016/j.actamat.2022.118216 ↗
8. A review on fundamental of high entropy alloys with promising high–temperature properties10.1016/j.jallcom.2018.05.067 ↗
9. Discovery and design of fatigue-resistant high-entropy alloys10.1016/j.scriptamat.2020.05.047 ↗
10. Extremely high fatigue resistance in an ultrafine grained high entropy alloy10.1016/j.apmt.2019.04.001 ↗
11. Remarkably high fracture toughness of HfNbTaTiZr refractory high-entropy alloy10.1016/j.jmst.2022.01.017 ↗
12. AlxCoCrFeNiSi high entropy alloy coatings with high microhardness and improved wear resistance10.1016/j.surfcoat.2020.126328 ↗
13. High temperature wear in CoCrFeNiCux high entropy alloys: the role of Cu10.1016/j.scriptamat.2018.10.007 ↗
14. The sliding wear behaviour of CoCrFeMnNi and AlxCoCrFeNi high entropy alloys at elevated temperatures10.1016/j.wear.2019.03.002 ↗
15. Corrosion-resistant high-entropy alloys: a review10.3390/met7020043 ↗
16. Recent advances on environmental corrosion behavior and mechanism of high-entropy alloys10.1016/j.jmst.2020.11.044 ↗
17. Corrosion resistant nanostructured eutectic high entropy alloy10.1016/j.corsci.2019.108315 ↗
18. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
19. Solid solution strengthening theories of high-entropy alloys10.1016/j.matchar.2019.02.034 ↗
20. The effect of Al addition on solid solution strengthening in CoCrFeMnNi: Experiment and modelling10.1016/j.actamat.2022.118208 ↗
21. Revealing strengthening contribution of grain refinement and phase precipitation in CrMnFeCoNi high-entropy alloy prepared from different powders
22. Microstructure and mechanical properties of ultra-fine grained MoNbTaTiV refractory high-entropy alloy fabricated by spark plasma sintering10.1016/j.jmst.2019.07.013 ↗
23. A new strategy for designing immiscible medium-entropy alloys with excellent tensile properties10.1016/j.actamat.2020.03.050 ↗
24. Influence of composition and as-cast structure on the mechanical properties of selected high entropy alloys10.1016/j.matchemphys.2019.122555 ↗
25. Microstructure and deformation behavior of two TWIP/TRIP high entropy alloys upon grain refinement10.1016/j.msea.2020.140661 ↗
26. quinary high-entropy alloy: Tuning phase stability and microstructure for enhanced mechanical properties10.1016/j.msea.2020.140441 ↗
27. Improving mechanical properties of an FCC high-entropy alloy by γγ′ and B2 precipitates strengthening10.1016/j.matchar.2019.109989 ↗
28. Superior tensile properties of Al0.3CoCrFeNi high entropy alloys with B2 precipitated phases at room and cryogenic temperatures10.1016/j.msea.2019.138424 ↗
29. A new strategy of tailoring strength and ductility of CoCrFeNi based high-entropy alloy10.1016/j.msea.2020.138940 ↗
30. Chen · 2006 · 31 · 685
31. Mixing enthalpy of liquid phase calculated by miedema’s scheme and approximated with sub-regular solution model for assessing forming ability of amorphous and glassy alloys10.1016/j.intermet.2010.06.003 ↗
32. Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element10.2320/matertrans.46.2817 ↗
33. Effect of Al on structure and mechanical properties of Fe-Mn-Cr-Ni-Al non-equiatomic high entropy alloys with high Fe content10.1016/j.jallcom.2018.08.093 ↗
34. The microstructure and mechanical properties of novel Al-Cr-Fe-Mn-Ni high-entropy alloys with trimodal distributions of coherent B2 precipitates10.1016/j.msea.2019.04.104 ↗
35. Effect of Al content and cold rolling on the microstructure and mechanical properties of Al5Cr12Fe35Mn28Ni20 high-entropy alloy10.1016/j.msea.2019.05.056 ↗
36. Solid‐solution phase formation rules for multi‐component alloys10.1002/adem.200700240 ↗
37. Prediction of high-entropy stabilized solid-solution in multi-component alloys10.1016/j.matchemphys.2011.11.021 ↗
38. Design of ternary high-entropy aluminum alloys (HEAls)10.1016/j.jallcom.2021.161836 ↗
39. Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys10.1063/1.3587228 ↗
40. CALPHAD aided design of high entropy alloy to achieve high strength via precipitate strengthening10.1007/s40843-019-1170-7 ↗
41. Exploration of spinodal decomposition in multi-principal element alloys (MPEAs) using CALPHAD modeling10.1016/j.scriptamat.2022.114657 ↗
42. Design of low-cost and high-strength titanium alloys using pseudo-spinodal mechanism through diffusion couple technology and CALPHAD10.3390/ma14112910 ↗
43. Overview No. 104 The physical and mechanical properties of NiAl10.1016/0956-7151(93)90001-9 ↗
44. High-entropy intermetallics: from alloy design to structural and functional properties10.1007/s12598-021-01926-7 ↗
45. Novel Fe36Mn21Cr18Ni15Al10 high entropy alloy with bcc/B2 dual-phase structure10.1016/j.jallcom.2017.02.211 ↗
46. Effects of vacuum annealing on the phase constituents and mechanical properties of the AlxCrFeMn2−xNi multiprincipal component alloys10.1016/j.vacuum.2022.110934 ↗
47. Affordable FeCrNiMnCu high entropy alloys with excellent comprehensive tensile properties10.1016/j.intermet.2016.06.011 ↗
48. Microstructure and mechanical properties of Hf and Ho doped NiAl-Cr (Mo) near eutectic alloy prepared by suction casting10.1016/j.matchar.2009.06.005 ↗
49. Dantzig · 2016
50. Controlled formation of coherent cuboidal nanoprecipitates in body-centered cubic high-entropy alloys based on Al2 (Ni, Co, Fe, Cr) 14 compositions10.1016/j.actamat.2018.01.050 ↗
51. Deviation from high-entropy configurations in the atomic distributions of a multi-principal-element alloy
52. Nanoscale structural evolution of Al3Sc precipitates in Al (Sc) alloys10.1016/S1359-6454(01)00116-1 ↗
53. On the morphological development of second-phase particles in elastically-stressed solids10.1016/0956-7151(92)90462-N ↗
54. On the morphological development of second-phase particles in elastically-stressed solids10.1016/0956-7151(92)90462-N ↗
55. Modeling of phase separation in alloys with coherent elastic misfit10.1023/A:1004587425006 ↗
56. The equilibrium shape of a misfitting precipitate10.1016/0956-7151(94)90036-1 ↗
57. HOSFORD · 2005
58. Q. Wang, Y. Ma, B. Jiang, X. Li, Y. Shi, C. Dong, P.K. Liaw, A cuboidal B2 nanoprecipitation-enhanced body-centered-cubic alloy Al0.7CoCrFe2Ni with prominent tensile properties, Scr. Mater. 120, 2016, pp. 85–89.10.1016/j.scriptamat.2016.04.014 ↗
59. The BCC/B2 morphologies in AlxNiCoFeCr high-entropy alloys10.3390/met7020057 ↗
60. Cr-promoted formation of B2+ L21 composite nanoprecipitates and enhanced mechanical properties in ferritic alloy
61. Effect of Fe on microstructure, phase evolution and mechanical properties of (AlCoCrFeNi) 100−xFex high entropy alloys processed by spark plasma sintering10.1016/j.intermet.2018.09.011 ↗