Effect of LaB6 on the microstructure evolution and mechanical properties of Ti-45Al-8Nb alloy
Source abstract
Abstract
High-Nb-containing TiAl alloys have been considered an excellent candidate for demanding high-temperature structural components due to their attractive mechanical properties and low density. However, the intrinsic brittleness at room temperature remains a great barrier limiting its processability. Here a novel alloy design strategy was introduced to improve its ductility from the perspective of grain refinement and removal of oxygen within the matrix. A minor content of LaB 6 was introduced into Ti-45Al-8Nb alloy prepared by vacuum arc melting. La 2O 3 and TiB ceramic phases were in-situ synthesized owing to the decomposition of LaB 6 additive. The effect of LaB 6 addition on the microstructure and compressive properties of TiAl-based alloys was investigated. The LaB 6 inoculation not only refines the lamellar colonies but also promotes the generation of single γ phases, contributing to the transformation from coarse full-lamellar to refined near-lamellar and even dual-phase colonies. The major fracture mode transformed from inter-lamellar to trans-lamellar to inter-granular with LaB 6 addition increasing. With 0.4 wt% LaB 6 addition, both the ultimate compress strength and fracture strain increased from 1065 MPa and 17.1 % to 1503MPa and 26.98 % respectively.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · MXene and MAX Phase Materials · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Recent progress in the development of gamma titanium aluminide alloys10.1002/1527-2648(200011)2:11<699::AID-ADEM699>3.0.CO;2-J ↗
2. Advances in gamma titanium aluminides and their manufacturing techniques10.1016/j.paerosci.2012.04.001 ↗
3. Intermetallic compounds for high-temperature structural use10.1126/science.243.4891.616 ↗
4. Polysynthetic twinned TiAl single crystals for high-temperature applications10.1038/nmat4677 ↗
5. Microstructure and mechanical properties of micro-nano Ti2AlC-reinforced TiAl composites10.1016/j.intermet.2022.107563 ↗
6. High-temperature oxidation protection of γ-based TiAl by sputtered AlOF films10.1016/j.surfcoat.2022.128283 ↗
7. History and development of γ-TiAl alloys and the effect of alloying elements on their phase transformations10.1016/j.jallcom.2022.164811 ↗
8. TiAl alloys in commercial aircraft engines10.1080/09603409.2016.1183068 ↗
9. Recent advances in processing of titanium alloys and titanium aluminides for space applications: a review10.1557/s43578-021-00104-w ↗
10. An advanced TiAl alloy for high-performance racing applications10.3390/ma13214720 ↗
11. Design, processing, microstructure, properties, and applications of advanced intermetallic TiAl alloys10.1002/adem.201200231 ↗
12. Intermetallics: why is it so difficult to introduce them in gas turbine engines10.1016/j.intermet.2006.01.064 ↗
13. An atomic-scale investigation on the initial precipitation behavior of nitrides in TiAl alloys10.1016/j.intermet.2020.106777 ↗
14. Effect of V on the microstructure and brittle-to-ductile transition of directionally solidified high-Nb TiAl alloy10.1016/j.intermet.2021.107455 ↗
15. New insights into high-temperature deformation and phase transformation mechanisms of lamellar structures in high Nb-containing TiAl alloys10.1016/j.actamat.2020.01.021 ↗
16. A novel method for grain refinement and microstructure modification in TiAl alloy by ultrasonic vibration10.1016/j.msea.2015.12.001 ↗
17. Effects of grain size and precipitated phases on mechanical properties in TiAl gradient materials10.1016/j.msea.2018.06.092 ↗
18. Grain refinement in gamma-TiAl-based alloys by solid state phase transformations10.1016/j.intermet.2005.11.015 ↗
19. Microstructure and mechanical properties of in-situ dual morphology Ti8C5/TiB2 reinforced TiAl composite10.1016/j.msea.2022.142918 ↗
20. As-cast microstructure characteristics dependent on solidification mode in TiAl-Nb
21. Fracture characteristics of gamma-TiAl alloy with high Nb content under cyclic loading10.1016/j.jallcom.2008.10.118 ↗
22. Microstructure and mechanical properties of spark plasma sintered nanocrystalline TiAl-xB composites (0.0<x<1.5 at%) containing carbon nanotubes10.1007/s11665-021-05773-6 ↗
23. Effects of B and Y additions on the microstructure and tensile behaviour of high-Nb TiAl alloys
24. Formation and kinds of boride on microstructure evolution and mechanical properties in Ti47.5Al2.0Cr2.0NbxB alloys10.1016/j.intermet.2021.107427 ↗
25. Grain refinement in beta-solidifying Ti44Al8Nb1B10.1016/j.intermet.2011.12.022 ↗
26. On the state of boride precipitates in grain refined TiAl-based alloys with high Nb content10.1016/j.jallcom.2013.03.104 ↗
27. Solidification and grain refinement in Ti(48-50)Al2Mn2Nb1B alloys10.1016/j.intermet.2018.07.018 ↗
28. Ductility of high-purity tial intermetallic compound10.2320/matertrans1989.33.419 ↗
29. Oxygen permeation behaviors of three titanium alloys at high temperature
30. Effect of oxygen on high-temperature phase equilibria in ternary Ti-Al-Nb alloys10.1002/zaac.202000098 ↗
31. The effect of lanthanum boride on the sintering, sintered microstructure and mechanical properties of titanium and titanium alloys10.1016/j.msea.2014.08.080 ↗
32. Preparation and application evaluation of La2O3-doped Y2O3 crucible materials for melting TiAl alloys10.1016/j.ceramint.2022.02.113 ↗
33. Microstructure evolution and mechanical properties of LaB6-modified Ti2AlNb alloy fabricated by blended elemental powder metallurgy10.1016/j.powtec.2020.05.030 ↗
34. Effect of LaB6 addition on the microstructure and properties of (Ti3Al + TiB)/Ti composites by laser cladding10.1016/j.matdes.2019.107959 ↗
35. Influence of nano-Y2O3 addition on microstructure and tensile properties of high-Al TiAl alloys10.1016/j.msea.2020.139803 ↗
36. Tcherdyntsev, Lanthanum hexaboride as advanced structural refiner/getter in TiAl-based refractory intermetallics10.1016/j.jallcom.2013.11.017 ↗
37. The significant impact of grain refiner on gamma-TiAl intermetallic fabricated by laser-based additive manufacturing
38. In situ synthesis of hybrid-reinforced titanium matrix composites10.1016/j.matlet.2006.09.014 ↗
39. Impurity scavenging, microstructural refinement and mechanical properties of powder metallurgy titanium and titanium alloys by a small addition of cerium silicide10.1016/j.msea.2013.02.042 ↗
40. Grain refinement by trace TiB2 addition in conventional cast TiAl-based alloy10.1016/j.matchar.2015.05.020 ↗
41. Boride formation behaviour and their effect on tensile ductility in cast TiAl-based alloys10.1016/j.matdes.2020.109064 ↗
42. The decomposition of the beta phase in Ti-44Al-8Nb and Ti-44Al-4Nb-4Zr-0.2Si alloys10.1016/S1359-6454(98)00113-X ↗
43. Role of boron in TiAl alloy development: a review10.1007/s12598-015-0615-1 ↗
44. Microstructure of cast gamma-TiAl based alloy solidified from beta phase region10.1016/S1003-6326(11)60702-4 ↗
45. Formation and kinds of boride on microstructure evolution and mechanical properties in Ti47.5Al2.0Cr2.0NbxB alloys10.1016/j.intermet.2021.107427 ↗
46. Boron solubility and boride compositions in alpha(2)+gamma titanium aluminides10.1016/S0966-9795(97)00016-2 ↗
47. The effect of lanthanum on the microstructure and high temperature mechanical properties of a beta-solidifying TiAl alloy10.1016/j.jallcom.2014.08.124 ↗
48. Microstructural configuration and compressive deformation behavior of a TiAl composite reinforced by Mn and in situ Ti2AlC particles10.1016/j.msea.2021.141772 ↗
49. Influence of oxygen content on the mechanical properties of hexagonal Ti—First principles calculations10.1016/j.msea.2013.10.004 ↗
50. Enhanced strength and ductility in a powder metallurgy Ti material by the oxygen scavenger of CaB610.1016/j.jmst.2022.07.042 ↗
51. Elimination of oxygen sensitivity in alpha-titanium by substitutional alloying with Al10.1038/s41467-021-26374-w ↗
52. Ductility improvement mechanism of Ti-6Al-4V+O sintered material10.2320/matertrans.Y-M2019869 ↗
53. Microstructure and mechanical properties of in-situ dual morphology Ti8C5/TiB2 reinforced TiAl composite10.1016/j.msea.2022.142918 ↗
54. Microstructure control and compressive properties of selective laser melted Ti-43.5Al-6.5Nb-2Cr-0.5B alloy: influence of reduced graphene oxide (RGO) reinforcement10.1016/j.msea.2018.08.087 ↗
55. Compression properties and work-hardening behavior of Ti2AlC/TiAl composites fabricated by combustion synthesis and hot press consolidation in the Ti–Al–Nb–C system10.1016/j.matdes.2011.05.041 ↗