journal article·2023-03

Excellent high-rate cyclic performance of LiNi0.8Co0.1Mn0.1O2 cathodes via dual Li2SiO3/PPy coating

Gang Cao, Maolin Zhang, Lejun Zhang, Yuan Wang, Yangxi Yan, Zhimin Li, Xiaofei Sun, Dongyan Zhang

Publisher page

Abstract

LiNi 0.8Co 0.1Mn 0.1O 2 (NCM811) has garnered significant research attention as a high-power battery cathode for electric vehicles. However, low-rate capability and poor cyclic performance limit the widespread applications of NCM cathodes. Although surface coating is an effective strategy to suppress these drawbacks, single-phase coating does not meet the application requirements. Herein, Li 2SiO 3 and PPy are used to prepare dual coating and improve both rate capability and cyclic performance. Results reveal that Li 2SiO 3/PPy-coated NCM811 exhibits a specific discharge capacity of 145.1 mAh/g and capacity retention of 96.4% after 100 charge/discharge cycles at 10 C. Various analytical and electrochemical characterization techniques demonstrate that Li 2SiO 3 in the inner layer is helpful to enhance Li + diffusion coefficient and PPy in the outer layer is conducive to improve electronic transmission and decrease polarization. Besides, the dual-phase coating can alleviate adverse side reactions at the interface by acting as a strong barrier between the cathode and electrolyte.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Dual functions of three-dimensional hierarchical architecture on improving the rate capability and cycle performance of LiNi0.8Co0.1Mn0.1O2 cathode material for lithium-ion battery10.1016/j.ceramint.2021.12.097 ↗
2. Inducing favorable dual-substitution reactivity by doping Mo6+ and F− to enhance electrochemical performance of LiNi0.6Co0.2Mn0.2O2 cathode materials10.1016/j.ceramint.2022.04.279 ↗
3. Improved electrochemical performances of LiNi0.5Co0.2Mn0.3O2 modified by Graphene/V2O5 co-coating10.1016/j.ceramint.2021.04.191 ↗
4. Improvement of the high-rate capability of LiNi1/3Co1/3Mn1/3O2 cathode by adding highly electroconductive and mesoporous graphene10.1016/j.jallcom.2018.05.110 ↗
5. Economic analysis of the disassembling activities to the reuse of electric vehicles Li-ion batteries10.1016/j.resconrec.2020.104785 ↗
6. Improving the single crystal LiNi0.8Co0.1Mn0.1O2 cathode material performance by fluorine doping10.1016/j.ceramint.2021.08.296 ↗
7. Tailoring the Al distribution in secondary particles for optimizing the electrochemical performance of LiNi0.8Co0.1Mn0.1O210.1016/j.ceramint.2021.01.161 ↗
8. Enhanced electrochemical properties of NCM811 cathode material due to synergistic modification with Sm as doping and coating agent10.1016/j.jallcom.2022.164712 ↗
9. Ag–Sn dual-modified LiNi0.8Co0.1Mn0.1O2 as cathode for lithium storage10.1016/j.jallcom.2020.156763 ↗
10. Ni/Li dsordering in lyered tansition metal oxide: electrochemical impact, origin, and control10.1021/acs.accounts.9b00033 ↗
11. Role of superexchange interaction on tuning of Ni/Li disordering in layered Li(NixMnyCoz)O210.1021/acs.jpclett.7b02498 ↗
12. Oxygen release and its effect on the cycling stability of LiNixMnyCozO2 (NMC) cathode materials for Li-Ion Batteries10.1149/2.0021707jes ↗
13. Structural changes and thermal stability of charged LiNixMnyCozO2 cathode materials studied by combined in situ time-resolved XRD and mass spectroscopy10.1021/am506712c ↗
14. Correlation between long range and local structural changes in Ni-rich layered materials during charge and discharge process10.1016/j.jpowsour.2018.11.053 ↗
15. Ab initio modeling of transition metal dissolution from the LiNi0.5Mn1.5O4 cathode10.1021/acsami.9b06010 ↗
16. Unraveling transition metal dissolution of Li1.04Ni1/3Co1/3Mn1/3O2 (NCM111) in lithium ion full cells by using the total reflection X-ray fluorescence technique10.1016/j.jpowsour.2016.08.099 ↗
17. Effect of residual lithium rearrangement on Ni-rich layered oxide cathodes for lithium-ion batteries10.1002/ente.201700950 ↗
18. Fast charging of lithium-ion batteries: a review of materials aspects10.1002/aenm.202101126 ↗
19. A multi-objective optimization energy management strategy for power split HEV based on velocity prediction
20. Controllable cathode–electrolyte interface of Li[Ni0.8Co0.1Mn0.1]O2 for lithium ion batteries: a review
21. Effects of Ag coating on the structural and electrochemical properties of LiNi0.8Co0.1Mn0.1O2 as cathode material for lithium ion batteries10.1016/j.electacta.2019.135054 ↗
22. Enabling stable and high-rate cycling of a Ni-rich layered oxide cathode for lithium-ion batteries by modification with an artificial Li+-conducting cathode-electrolyte interphase10.1039/D1TA02563E ↗
23. Enhanced structural and cycling stability of Li2CuO2-coated LiNi0.33Mn0.33Co0.33O2 cathode with flexible ionic liquid-based gel polymer electrolyte for lithium polymer batteries10.1016/j.electacta.2020.136122 ↗
24. Valuation of surface coatings in high-energy density lithium-ion battery cathode materials, Energy Storage
25. Improvement of cycle performance of the high nickel cathode material LiNi0.88Co0.07Al0.05O2 for lithium-ion batteries by the spray drying of V2O510.1016/j.jallcom.2021.162161 ↗
26. Cation and polyanion co-doping synergy to improve electrochemical performances of Li-rich manganese-based cathode materials10.1016/j.jallcom.2022.166527 ↗
27. Surface-reinforced NCM811 with enhanced electrochemical performance for Li-ion batteries10.1016/j.jallcom.2022.165488 ↗
28. Li3PO4 surface coating on Ni-rich LiNi0.6Co0.2Mn0.2O2 by a citric acid assisted sol-gel method: Improved thermal stability and high-voltage performance10.1016/j.jpowsour.2017.05.042 ↗
29. Degradation effects on the surface of commercial LiNi0.5Co0.2Mn0.3O2 electrodes10.1016/j.jpowsour.2016.09.071 ↗
30. Templated assembly of LiNi0.8Co0.15Al0.05O2/graphene nano composite with high rate capability and long-term cyclability for lithium ion battery10.1016/j.jallcom.2019.151786 ↗
31. Enhancing surface stability of LiNi0.8Co0.1Mn0.1O2 cathode with hybrid core-shell nanostructure induced by high-valent titanium ions for Li-ion batteries at high cut-off voltage10.1016/j.jallcom.2020.155099 ↗
32. Recent progress in coatings and methods of Ni-rich LiNi0.8Co0.1Mn0.1O2 cathode materials: A short review10.1016/j.ceramint.2020.06.091 ↗
33. Synergy effects on blending Li-rich and classical layered cathode oxides with improved electrochemical performance10.1016/j.ceramint.2019.04.250 ↗
34. Revealing mechanism of Li3PO4 coating suppressed surface oxygen release for commercial Ni-Rich layered cathodes10.1021/acsaem.0c00859 ↗
35. LiNbO3-coated LiNi0.8Co0.1Mn0.1O2 cathode with high discharge capacity and rate performance for all-solid-state lithium battery10.1016/j.jechem.2019.02.006 ↗
36. A hydrolysis-hydrothermal route for the synthesis of ultrathin LiAlO2-inlaid LiNi0.5Co0.2Mn0.3O2 as a high-performance cathode material for lithium ion batteries10.1039/C4TA05902F ↗
37. LiTa2PO8 coated nickel-rich cathode material for improved electrochemical performance at high voltage10.1016/j.ceramint.2019.12.064 ↗
38. Highly enhanced electrochemical performances of LiNi0.815Co0.15Al0.035O2 by coating via conductively LiTiO2 for lithium-ion batteries10.1016/j.ceramint.2019.06.055 ↗
39. Lue, Enhanced performance of a Ni-rich LiNi0.8Co0.1Mn0.1O2 cathode material formed through Taylor flow synthesis and surface modification with Li2MoO410.1016/j.cej.2020.127150 ↗
40. Enhanced electrochemical performance of LiNi0.8Co0.1Mn0.1O2 cathode materials via Li4P2O7 surface modification for Li-ion batteries10.1016/j.ceramint.2018.05.024 ↗
41. Enhanced electrochemical performance of La-doped Li-rich layered cathode material10.1016/j.jallcom.2020.156620 ↗
42. Fe3+ and PO43- co-doped Li-rich Li1.20Mn0.56Ni0.16Co0.08O2 as cathode with outstanding structural stability for lithium-ion battery10.1016/j.jallcom.2021.158899 ↗
43. Enhanced electrochemical performance of Ni-Rich cathodes by neutralizing residual lithium with acid compounds10.1021/acsami.1c16482 ↗
44. Improvement of electrochemical performance of LiNi0.8Co0.1Mn0.1O2 cathode material via Li2.09W0.9Nb0.1O4 Li-ion conductive coating layer10.1007/s10008-020-04742-8 ↗
45. Enhanced electrochemical performance of fast ionic conductor LiTi2(PO4)3-coated LiNi1/3Co1/3Mn1/3O2 cathode material10.1021/acsami.7b19692 ↗
46. Surface modification of LiNi0.8Co0.1Mn0.1O2 with conducting polypyrrole10.1007/s10008-014-2519-7 ↗
47. Improved electrochemical performance of LiNi0.8Co0.1Mn0.1O2 cathode materials induced by a facile polymer coating for lithium-ion batteries, ACS Applied Energy
48. Polyaniline modification and performance enhancement of lithium-rich cathode material based on layered-spinel hybrid structure10.1016/j.jpowsour.2015.05.058 ↗
49. Polyvinylpyrrolidone-Induced uniform surface-conductive polymer coating endows Ni-Rich LiNi0.8Co0.1Mn0.1O2 with enhanced cyclability for lithium-ion batteries10.1021/acsami.9b04050 ↗
50. Preparation and characterization of conducting polyaniline-coated LiVPO4F nanocrystals with core-shell structure and its application in lithium-ion batteries10.1016/j.electacta.2015.09.141 ↗
51. Superior stability secured by a four-phase cathode electrolyte interface on a Ni-Rich cathode for lithium ion batteries10.1021/acsami.9b12578 ↗
52. Conductive cyclized polyacrylonitrile coated LiNi0.6Co0.2Mn0.2O2 cathode with the enhanced electrochemical performance for Li-Ion batteries10.1016/j.electacta.2019.135505 ↗
53. Surface architecture design of LiNi0.8Co0.15Al0.05O2 cathode with synergistic organics encapsulation to enhance electrochemical stability10.1002/cssc.202001771 ↗
54. Building ultraconformal protective layers on both secondary and primary particles of layered lithium transition metal oxide cathodes10.1038/s41560-019-0387-1 ↗
55. Constructing high conductive composite coating with TiN and polypyrrole to improve the performance of LiNi0.8Co0.1Mn0.1O2 at high cutoff voltage of 4.5 V10.1021/acsaem.1c01934 ↗
56. Conductive polymers encapsulation to enhance electrochemical performance of Ni-Rich cathode materials for Li-Ion batteries10.1021/acsami.8b02396 ↗
57. Improvement of the cycling performance and thermal stability of lithium-ion cells by double-layer coating of cathode materials with Al2O3 nanoparticles and conductive polymer10.1021/acsami.5b02690 ↗
58. Enhanced electrochemical performance of dual-conductive layers coated Ni-rich LiNi0.6Co0.2Mn0.2O2 cathode for Li-ion batteries at high cut-off voltage10.1016/j.electacta.2018.08.091 ↗
59. Improving the cycling stability of LiNi0.8Co0.1Mn0.1O2 by enhancing the structural integrity via synchronous Li2SiO3 coating, ACS Applied Energy
60. Effects of Li2SiO3 coating on the performance of LiNi0.5Co0.2Mn0.3O2 cathode material for lithium ion batteries10.1016/j.jallcom.2016.08.187 ↗
61. Improved cycle stability of high-capacity Ni-rich LiNi0.8Mn0.1Co0.1O2 at high cut-off voltage by Li2SiO3 coating10.1016/j.jpowsour.2017.01.066 ↗
62. Polymer microsphere-assisted synthesis of lithium-rich cathode with improved electrochemical performance10.1016/j.ceramint.2015.11.173 ↗
63. Improving electrochemical performance of Ni-rich LiNi0.8Co0.1Mn0.1O2 cathode for Li-ion batteries by dual-conductive coating layer of PPy and LiAlO210.1016/j.jallcom.2020.156387 ↗
64. The mechanism of side reaction induced capacity fading of Ni-rich cathode materials for lithium ion batteries10.1016/j.jechem.2020.09.031 ↗
65. Enhancing high-potential stability of Ni-rich LiNi0.8Co0.1Mn0.1O2 cathode with PrF3 coating10.1016/j.ceramint.2020.10.213 ↗
66. A review on progress of lithium-rich manganese-based cathodes for lithium ion batteries10.1016/j.jpowsour.2020.229362 ↗
67. An effective doping strategy to improve the cyclic stability and rate capability of Ni-rich LiNi0.8Co0.1Mn0.1O2 cathode10.1016/j.cej.2020.126195 ↗
68. Inhibited intracrystalline cracks and enhanced electrochemical properties of NCM811 cathode materials coated by EPS10.1016/j.ceramint.2021.08.167 ↗
69. Enhanced electrochemical properties of SiO2-Li2SiO3-coated NCM811 cathodes by reducing surface residual lithium10.1016/j.jallcom.2022.166317 ↗
70. Minimization of the cation mixing in Li1-x(NMC)(1-x)O2 as cathode material10.1016/j.jpowsour.2009.09.029 ↗
71. Effects of lithium tungsten oxide coating on LiNi0.90Co0.05Mn0.05O2 cathode material for lithium-ion batteries10.1016/j.jpowsour.2020.229037 ↗
72. Ni-Rich LiNi0.8Co0.1Mn0.1O2 oxide coated by dual-conductive layers as high performance cathode for lithium-ion batteries10.1021/acsami.7b08006 ↗
73. Lithium-rich Li1.2Ni0.13Co0.13Mn0.54O2 oxide coated by Li3PO4 and carbon nanocomposite layers as high performance cathode materials for lithium ion batteries10.1039/C4TA04823G ↗
74. Revealing mechanism of Li3PO4 coating suppressed surface oxygen release for commercial Ni-Rich layered cathodes10.1021/acsaem.0c00859 ↗
75. Ultrathin Li-Si-O coating layer to stabilize the surface structure and prolong the cycling Life of single-crystal LiNi0.6Co0.2Mn0.2O2 cathode materials at 4.5 V10.1021/acsami.0c22356 ↗
76. Improving the cycling stability of LiNi0.8Co0.1Mn0.1O2 by enhancing the structural integrity via synchronous Li2SiO3 coating10.1021/acsaem.2c00276 ↗
77. Zhao · Ion.-. Conduct. Li 2 SiO 3-Coat. Lithium-Rich. Layer. oxide Exhib. High. rate Capab. Low. Polariz. · 2015 · 51 · 9093
78. Improving electrochemical performance of Ni-rich LiNi0.8Co0.1Mn0.1O2 cathode for Li-ion batteries by dual-conductive coating layer of PPy and LiAlO210.1016/j.jallcom.2020.156387 ↗
79. Photo-induced synthesis of polypyrrole-silver nanocomposite films on N-(3-trimethoxysilylpropyl)pyrrole-modified biaxially oriented polyethylene terephthalate flexible substrates10.1039/c3ra22981e ↗
80. Improving electrochemical performance of Ni-rich LiNi0.8Co0.1Mn0.1O2 cathode for Li-ion batteries by dual-conductive coating layer of PPy and LiAlO210.1016/j.jallcom.2020.156387 ↗
81. Enhancing the electrochemical performance of LiNi0.4Co0.2Mn0.4O2 by V2O5/LiV3O8 coating10.1021/acsami.9b08591 ↗
82. Unveiling the impact of the polypyrrole coating layer thickness on the electrochemical performances of LiNi0.5Co0.2Mn0.3O2 in Li–Ion battery10.1002/slct.201901112 ↗
83. Improved electrochemical and thermal properties of nickel rich LiNi0.6Co0.2Mn0.2O2 cathode materials by SiO2 coating10.1016/j.jpowsour.2014.12.128 ↗
84. Polycrystalline and single crystalline NCM cathode materials—quantifying particle cracking, active surface area, and lithium diffusion10.1002/aenm.202003400 ↗
85. Significantly improving cycling performance of cathodes in lithium ion batteries: The effect of Al2O3 and LiAlO2 coatings on LiNi0.6Co0.2Mn0.2O210.1016/j.nanoen.2017.11.010 ↗
86. Insights into the positive effect of post-annealing on the electrochemical performance of Al2O3-coated Ni-Rich NCM cathodes for lithium-ion batteries10.1021/acsaem.0c03135 ↗
87. Enhancing the electrochemical performance of LiNi0.70Co0.15Mn0.15O2 cathodes using a practical solution-based Al2O3 coating10.1021/acsami.0c06484 ↗
88. The working principle of a Li2CO3/LiNbO3 coating on NCM for thiophosphate-based all-solid-state batteries10.1021/acs.chemmater.0c04660 ↗
89. Performance and stability improvement of layered NCM lithium-ion batteries at high voltage by a microporous Al2O3 sol–gel coating10.1021/acsomega.9b01706 ↗
90. Preparation and rate capability of carbon coated LiNi1/3Co1/3Mn1/3O2 as cathode material in lithium ion batteries10.1021/acsami.6b16741 ↗
91. Artificial interface stabilized LiNi0.80Co0.15Al0.05O2@Polysiloxane cathode for stable cycling lithium-ion batteries10.1016/j.jpowsour.2020.228480 ↗
92. Enhancing high-temperature and high-voltage performances of single-crystal LiNi0.5Co0.2Mn0.3O2 cathodes through a LiBO2/LiAlO2 dual-modification strategy10.1021/acssuschemeng.9b07792 ↗
93. The effect of elemental doping on Nickel-Rich NCM cathode materials of lithium ion batteries, The10.1021/acs.jpcc.1c09691 ↗
94. Co-modification by LiAlO2-coating and Al-doping for LiNi0.5Co0.2Mn0.3O2 as a high-performance cathode material for lithium-ion batteries with a high cutoff voltage10.1016/j.jallcom.2018.07.223 ↗
95. Building ultraconformal protective layers on both secondary and primary particles of layered lithium transition metal oxide cathodes10.1038/s41560-019-0387-1 ↗
96. Armoring LiNi1/3Co1/3Mn1/3O2 cathode with reliable fluorinated organic–inorganic hybrid interphase layer toward durable high rate battery
97. Recent progress and perspective of advanced high-energy Co-Less Ni-Rich cathodes for Li-Ion batteries: Yesterday, Today, and Tomorrow10.1002/aenm.202002027 ↗
98. Enhanced electrochemical properties of SiO2-Li2SiO3-coated NCM811 cathodes by reducing surface residual lithium10.1016/j.jallcom.2022.166317 ↗
99. A facile strategy to enhance the stability of Li-rich cathode: Electrochemical performance improvement and mechanism exploration10.1016/j.ceramint.2018.06.209 ↗
100. A three-in-one engineering strategy to achieve LiNi0.8Co0.1Mn0.1O2 cathodes with enhanced high-voltage cycle stability and high-rate capacities towards lithium storage10.1016/j.jpowsour.2022.231035 ↗