Eu3+-activated SrY2O4:Ce4+/3+ red-phosphor for WLEDs: Structural and luminescent insights from experimental and theoretical approaches
Source abstract
Abstract
Herein, single-phase Eu3+-activated SrY2O4:Ce4+/3+ red-emitting phosphor was produced by an adapted Pechini route under softer synthesis conditions (1100 °C in CO reducing atmosphere) compared to those reported so far. A detailed structural study conducted by Rietveld refinement and DFT calculations confirmed the presence of two hexa-coordinated Y3+ sites that are occupied by Eu3+. Cerium is present in a mixed oxidation state, where the proportion of Ce4+/Ce3+ was determined as 70/30% by X-ray photoelectron spectroscopy (XPS), and this influences the SrY2O4 phase stabilization by increasing the point defect concentration. A thorough analysis of the photoluminescent features of Eu3+-activated phosphor revealed its occupancy in at least two non-equivalent local sites belonging to the C1 point group. Furthermore, the excited state dynamics of the phosphors were enlightened by the theoretical band structure determination. Finally, 3%-doped sample exhibited the highest intrinsic quantum yield (81%), which qualifies these materials to be used as red-emitting components for solid-state lighting.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Luminescence Properties of Advanced Materials · Advanced Photocatalysis Techniques · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (86)
Show source-provided references
1. United Nations Conference on Trade and Development. Technology and innovation report 2021: catching technological waves, innovation with equity, 2020. ISBN: 9789210056588.
2. Super-efficient equipment and appliance deployment (SEAD), initiative under the clean energy ministerial (CEM) and the international partnership for energy efficiency cooperation (IPEEC). Global lighting challenge 2021. 〈https://www.cleanenergyministerial.org/initiatives-campaigns/super-efficient-equipment-and-deployment-sead-initiative/?_years=2021〉 (Accessed 20 November 2022).
3. Recent advances in organic light-emitting diodes: toward smart lighting and displays10.1039/C9QM00716D ↗
4. Smart lighting application for energy saving and user well-being in the residential environment10.3390/su13116198 ↗
5. Saturation mechanisms in common LED phosphors10.1021/acsphotonics.1c00372 ↗
6. Recent prospects on phosphor-converted LEDs for lighting, displays, phototherapy, and indoor farming10.1016/j.jlumin.2021.118167 ↗
7. White LED based on nano-YAG:Ce3+/YAG:Ce3+,Gd3+ hybrid phosphors10.1016/j.ijleo.2011.06.005 ↗
8. Light converting inorganic phosphors for white light-emitting diodes10.3390/ma3032172 ↗
9. LEDs for photons, physiology and food10.1038/s41586-018-0706-x ↗
10. M. Jacoby, Tuning phosphors for better white light, C&EN. 96, 46 ,2018, 28–32.10.1021/cen-09646-cover ↗
11. Phosphors in phosphor-converted white light-emitting diodes: Recent advances in materials, techniques and properties10.1016/j.mser.2010.07.001 ↗
12. Sr1.7Zn0.3CeO4:Eu3+ novel red-emitting phosphors: synthesis and photoluminescence properties10.1021/am4041493 ↗
13. Strong and pure red-emitting Eu3+-doped phosphor with excellent thermal stability for warm WLEDs10.1039/D1MA01221E ↗
14. Structural and spectroscopic investigations on the quenching free luminescence of europium oxalate nanocrystals10.1107/S2053229619005059 ↗
15. Blue-light excitable La2Ge2O7:Eu3+ red phosphor for white light-emitting diodes10.1016/j.jallcom.2019.152226 ↗
16. Structural and luminescence properties of CeO2:Eu3+ nanophosphors synthesized by oxalate precursor method10.1007/s13204-014-0375-5 ↗
17. Structure and luminescence of SrY2O4:Eu10.1149/1.1392570 ↗
18. Thermal properties of polycrystalline sintered SrY2O410.1016/j.jallcom.2004.11.041 ↗
19. Synthesis and luminescence property of SrY2O4:M (M = Eu3+, Tb3+, Sm3+, Ce3+, Bi3+) phosphors10.1016/j.jlumin.2018.07.040 ↗
20. A novel strategy for controllable emissions from Eu3+ or Sm3+ ions co-doped SrY2O4:Tb3+ phosphors10.1039/c2cp41722g ↗
21. Effect of Eu3+ on optical and energy bandgap of SrY2O4 nanophosphors for FED applications
22. Structural and luminescence studies of titanium co-doped SrY2O4:Eu phosphors
23. Thermal properties of polycrystalline sintered SrY2O410.1016/j.jallcom.2004.11.041 ↗
24. Single crystal fiber growth of cerium doped strontium yttrate, SrY2O4:Ce3+10.1016/j.jcrysgro.2016.11.033 ↗
25. Combustion synthesis and luminescence behaviour of the Tb3+ doped SrY2O4 phosphor10.1007/s11664-017-5825-x ↗
26. Upconversion photoluminescence properties of SrY2O4:Er3+,Yb3+ under 1550 and 980 nm excitation10.1016/S1002-0721(16)60049-2 ↗
27. The influence of the complexing agent on the luminescence of multicolor-emitting Y2O3:Eu3+,Er3+,Yb3+ phosphors obtained by the Pechini’s method10.1016/j.matchemphys.2020.123840 ↗
28. The Scherrer equation versus the ‘Debye-Scherrer equation’10.1038/nnano.2011.145 ↗
29. A profile refinement method for nuclear and magnetic structures10.1107/S0021889869006558 ↗
30. GSAS-II: the genesis of a modern open-source all purpose crystallography software package10.1107/S0021889813003531 ↗
31. EXPGUI – A graphical user interface for GSAS10.1107/S0021889801002242 ↗
32. Reproducibility of XPS analysis for film thickness of SiO2/Si by active Shirley method10.1016/j.elspec.2015.12.008 ↗
33. Electronic energy levels of the trivalent lanthanide aquo ions. IV. Eu3+10.1063/1.1669896 ↗
34. VESTA: a three-dimensional visualization system for electronic and structural analysis10.1107/S0021889808012016 ↗
35. Inhomogeneous electron gas10.1103/PhysRev.136.B864 ↗
36. Quantum Espresso: a modular and open-source software project for quantum simulations of materials10.1088/0953-8984/21/39/395502 ↗
37. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
38. Special points for Brillouin-zone integrations10.1103/PhysRevB.13.5188 ↗
39. Software update: The ORCA program system – Version 5.0
40. Multiwfn: a multifunctional wavefunction analyzer10.1002/jcc.22885 ↗
41. Balanced basis set of split valence, triple zeta valence and quadruple zeta valence quality for H to Rn: Design and assessment of accuracy10.1039/b508541a ↗
42. First-principle calculations of zero-field splitting parameters10.1063/1.2213976 ↗
43. Periodic trends in lanthanide compounds through the eyes of multireference ab initio theory10.1021/acs.inorgchem.6b00244 ↗
44. Introduction of n-electron valence states for multireference perturbation theory10.1063/1.1361246 ↗
45. N-electron valence state perturbation theory: a fast implementation of the strongly contracted variant10.1016/S0009-2614(01)01303-3 ↗
46. Efficient and accurate approximations to the molecular spin-orbit coupling operator and their use in molegular g-tensor calculations10.1063/1.1829047 ↗
47. Rosch · 2004
48. Improved segmented all-electron relativistically contracted basis sets for the lanthanides10.1021/acs.jctc.5b01048 ↗
49. ESCA studies of yttrium aluminum garnets10.1021/jp9838801 ↗
50. An XPS study of Si as it occurs in adsorbents, catalysts, and thin films10.1016/0378-5963(83)90003-X ↗
51. The calculation of transport properties and density of states of disordered solids10.1007/BF01328846 ↗
52. Satellites in Ce 3d X-ray photoelectron spectroscopy of Ceria
53. Point defects
54. Effect of europium doping levels on photoluminescence and thermoluminescence of strontium yttrium oxide phosphor10.1016/j.mssp.2014.10.052 ↗
55. First-principle study of surface charging in LaAlO3 / SrTiO3 heterostructures10.1103/PhysRevB.92.085420 ↗
56. Rietveld analysis and Fourier maps of hydroxyapatite10.1016/S0142-9612(97)00009-4 ↗
57. Hall mobility in SrTiO310.1103/PhysRev.161.822 ↗
58. Williamson-Hall analysis in estimation of lattice strain in nanometer-sized ZnO particles10.1186/2251-7235-6-6 ↗
59. Effect of Eu3+ on optical and energy bandgap of SrY2O4 nanophosphors for FED applications10.1016/j.ijleo.2020.164533 ↗
60. What can electron microscopy tell us beyond crystal structures?10.1002/ejic.201501342 ↗
61. Effect of europium doping levels on photoluminescence and thermoluminescence of strontium yttrium oxide phosphor10.1016/j.mssp.2014.10.052 ↗
62. Effects of dopant addition on lattice and luminescence intensity parameters of Eu(III)-doped lanthanum orthovanadate10.1021/acs.jpcc.6b10778 ↗
63. Photo chemical generation from orthorhombic CaFe2O4 nanoparticles synthesized by different methods
64. CaFe2O4 oxygen carrier characterization during the partial oxidation of coal in the chemical looping gasification application10.1016/j.apenergy.2018.05.035 ↗
65. Effect of lattice distortion in optical properties of CeO2 nanocrystals on Mn substitution by mechanical alloying10.1016/j.jallcom.2019.01.350 ↗
66. Strong-correlated behavior of 4f electrons and 4f5d hybridization in PrO2
67. The role of 4f and 5f-orbitals in bonding: a magnetochemical, crystal field, density functional theory, and multi-reference wavefunction study10.1039/C6DT00634E ↗
68. Electron self-trapping in intermediate-valent SmB610.1103/PhysRevB.61.15714 ↗
69. On the effect of 4f electons on the structural characteristics of lanthanides trihalides: Computational and electron diffraction study of dysprosium trichloride10.1063/1.2828537 ↗
70. A DFT+U study on the contribution of 4f electrons to oxygen vacancy formation and migration in Ln-doped CeO210.1039/C6CP00637J ↗
71. Red phosphor based on Eu3+-isoelectronically doped Ba2SiO4 obtained via sol-gel route for solid state lighting10.1039/C7RA10494D ↗
72. Interpretation of europium(III) spectra10.1016/j.ccr.2015.02.015 ↗
73. The absorption and fluorescence spectra of rare earth ions in solution
74. Dependence of the Lifetime upon the Excitation energy and intramolecular energy transfer rates: the 5D0 EuIII emission case10.1002/chem.201201736 ↗
75. Tunable photoluminescence and energy transfer Eu3+,Ho3+-doped Ca0.05Y1.93-xO2 nanophosphors for warm white LEDs applications
76. Host-sensitized color-tunable luminescence properties of self-activated and Eu3+-doped Ca3LiZnV3O12 phosphors10.1016/j.jlumin.2018.07.030 ↗
77. High-efficiency and thermal-stable Eu3+-activated Ca3Y(AlO)3(BO3)4 red-emitting phosphors for near-UV-excited white LEDs10.1016/j.jlumin.2018.09.010 ↗
78. A new eulyte-type Pb3Bi(PO4)3:Eu3+ red-emitting phosphor: synthesis, structures and photoluminescence characteristics10.1016/j.jlumin.2019.116978 ↗
79. Efficient and stable Sr3Eu2B2O12 red phosphor benefiting from low symmetry and distorted local environment10.1039/C9DT04769G ↗
80. Synthesis and luminescence properties of novel red-emitting Eu3+ ions doped silicate phosphors for photonic applications10.1016/j.jallcom.2020.154289 ↗
81. High-brightness and high-color purity red-emitting Ca3Lu(AlO)3(BO3)4:Eu3+ phosphors with internal quantum efficiency close to unity for near-ultraviolet-based white light-emitting diodes10.1364/OL.43.001307 ↗
82. Red emitting Ba2GdVO6:Eu3+ phosphors for blue light converted warm white LEDs10.1016/j.inoche.2020.107768 ↗
83. Red-light-emitting inorganic La2CaZnO5 frameworks with high photoluminescence quantum efficiency: Theoretical approach
84. Eu3+-activated Na2Gd(PO4)(MoO4): a novel high-brightness red-emitting phosphor with high color purity and quantum efficiency for white light-emitting diodes10.1016/j.jallcom.2017.05.251 ↗
85. A red phosphor LaSc3(BO3)4:Eu3+ with zero-thermal-quenching and high quantum efficiency for LEDs
86. A potential red-emitting phosphor BaZrGe3O9:Eu3+ for WLED and FED applications: Synthesis, structure, and luminescence properties10.1021/acs.inorgchem.7b00591 ↗