journal article·2023-03

High strain rate deformation behavior of 2195 Al-Li alloy: Constitutive behavior and grain fragmentation

Jiahui Xu, Liang Huang, Bingxin Xie, Mingjie Zhao, Yu Wang, Jianjun Li

Publisher page

Abstract

The high-speed forming process is a promising method for the preparation of high-performance Al-Li alloy components. However, the high-strain rate deformation behavior of the material is complex and difficult to accurately predict, which significantly restricts its development. In this paper, using the split Hopkinson pressure bar apparatus, the constitutive behavior and microstructure evolution of as-annealed and solution treated 2195 Al-Li alloy during high strain rate deformation was studied. As the strain rate increases, the flow stress first decreases and then increases for both two-state materials, showing a local strain rate softening behavior. Based on the Johnson-Cook model, a modified constitutive model is proposed, in which a correction term for the C value related to strain rate and strain is introduced. The modified Johnson-Cook model can accurately capture the abnormal strain rate sensitivity behavior observed in the experiment. In addition, it was found that the heat treatment state has a significant effect on the microstructural evolution behavior of 2195 Al-Li alloy. The as-annealed material shows the deformation behavior based on the evolution of dislocation cells. In addition to dislocation cells, there is also deformation behavior based on the evolution of submicron lath deformation bands for solution treated material. Dislocation cross slip is suppressed in the solution treated material, and its slip mode tends to be the plane slip. Through the analysis of dislocation density, mean slip distance of dislocation slip, and the interaction between solid atoms and dislocation, the mechanism of the abnormal deformation behavior of the solution treated material is revealed.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Velocity Impact and Material Behavior · Metallurgy and Material Forming · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Effect of the aging process and pre-deformation on the precipitated phase and mechanical properties of 2195 Al–Li alloy10.1016/j.msea.2021.142394 ↗
2. Quantification of the influence of increased pre-stretching on microstructure-strength relationships in the Al–Cu–Li alloy AA219510.1016/j.actamat.2016.02.017 ↗
3. Formability of AA 2219-O sheet under quasi-static, electromagnetic dynamic, and mechanical dynamic tensile loadings10.1016/j.jmst.2020.07.023 ↗
4. Temperature dependent negative to positive strain rate sensitivity and compression behavior for 2024-T351 aluminum alloy10.1016/j.jallcom.2018.06.196 ↗
5. Experimental study of macro-micro dynamic behaviors of 5A0X aluminum alloys in high velocity deformation10.1016/j.msea.2013.12.001 ↗
6. Variation of strain rate sensitivity of an aluminum alloy in a wide strain rate range: mechanism analysis and modeling10.1016/j.jallcom.2016.07.077 ↗
7. A unified model for coupling constitutive behavior and micro-defects evolution of aluminum alloys under high-strain-rate deformation10.1016/j.ijplas.2016.07.011 ↗
8. Effect of strain rate and temperature on dynamic mechanical behavior and microstructure evolution of ultra-high strength aluminum alloy10.1016/j.msea.2018.06.018 ↗
9. Development of adiabatic shearing bands in 7003-T4 aluminum alloy under high strain rate impacting10.1016/j.msea.2018.06.087 ↗
10. Effects of different aging statuses and strain rate on the adiabatic shear susceptibility of 2195 aluminum-lithium alloy10.1016/j.msea.2012.03.067 ↗
11. Thermo-viscoplastic constitutive relation for aluminium alloys, modeling of negative strain rate sensitivity and viscous drag effects10.1016/j.matdes.2009.04.011 ↗
12. Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures10.1016/0013-7944(85)90052-9 ↗
13. Negative to positive strain rate sensitivity in 5xxx series aluminum alloys: experiment and constitutive modeling10.1016/j.ijplas.2013.11.001 ↗
14. Variable strain rate sensitivity in an aluminum alloy: response and constitutive modeling10.1016/j.ijplas.2012.02.001 ↗
15. Dynamic deformation and failure of ultrafine-grained titanium10.1016/j.actamat.2016.11.041 ↗
16. High strain-rate deformation of T8-tempered, cryo-rolled and ultrafine grained AA 2099 aluminum alloy10.1016/j.msea.2019.03.109 ↗
17. Grain structure and precipitate variations in 7003-T6 aluminum alloys associated with high strain rate deformation10.1016/j.msea.2019.01.003 ↗
18. Crash-worthiness of a recently-developed AA 2624 aluminum alloy: experimental studies10.1016/j.msea.2019.138389 ↗
19. Deformation banding and static recrystallization in high-strain-rate-torsioned Al-Mg alloy10.1016/j.jallcom.2019.152311 ↗
20. Dynamic recrystallization behaviors of high Mg alloyed Al-Mg alloy during high strain rate rolling deformation10.1016/j.msea.2019.03.028 ↗
21. Effects of strain rates on dynamic deformation behavior of Cu-20Ag alloy10.1016/j.jmst.2020.11.043 ↗
22. Combined strengthening from nanotwins and nanoprecipitates in an iron-based superalloy10.1016/j.actamat.2018.04.001 ↗
23. Continuum dislocation dynamics-based grain fragmentation modeling10.1016/j.ijplas.2018.11.006 ↗
24. Modeling of intragranular misorientation and grain fragmentation in polycrystalline materials using the viscoplastic self-consistent formulation10.1016/j.ijplas.2018.06.004 ↗
25. Fundamentals of titanium nanocrystalline structure creation by cryomechanical grain fragmentation10.1016/j.msea.2017.06.057 ↗
26. Modeling grain fragmentation and deformation textures for titanium using a combined approach of the viscoplastic self-consistent model and a shear fluctuation model10.1007/s10853-017-1021-x ↗
27. The effect of temperature on the high-strain-rate response of Co-Al-W- base alloys: experiments and modeling10.1016/j.jallcom.2021.163154 ↗
28. Microstructure evolution and constitutive relation establishment of extruded Mg-1Al-6Y alloy under high speed impact10.1016/j.jallcom.2022.164540 ↗
29. The yielding, deformation and fracture behavior for the Widmanstätten structure of Ti–8Al–1Mo–1V alloy upon high speed impact10.1016/j.jallcom.2019.151952 ↗
30. Effect of strain rate on microstructural evolution and thermal stability of 1050 commercial pure aluminum10.1016/S1003-6326(18)64632-1 ↗
31. Microstructure evolution and mechanical properties of as-annealed and solution treated Al-Cu-Li alloy 2195 under dynamic compression10.1016/j.jmatprotec.2022.117516 ↗
32. Modeling of continuous dynamic recrystallization of Al-Zn-Cu-Mg alloy during hot deformation based on the internal-state-variable (ISV) method10.1016/j.ijplas.2018.03.002 ↗
33. A model of grain fragmentation based on lattice curvature10.1016/j.actamat.2009.11.020 ↗
34. Microstructural evolution and strengthening mechanism of Al–Mg alloys with fine grains processed by accumulative continuous extrusion forming10.1016/j.jmst.2022.03.032 ↗
35. Microstructure evolution and mechanical properties of commercially pure aluminum during equal channel angular extrusion with spherical cavity (ECAE-SC)
36. Grain refinement mechanism of Mg-3Sn-1Mn-1La alloy during accumulative hot rolling10.1016/j.jmst.2021.02.052 ↗
37. A review of dynamic recrystallization phenomena in metallic materials10.1016/j.matdes.2016.09.012 ↗
38. The mechanism of plastic deformation of crystals. Part I. Theoretical
39. Nonadditive strengthening functions for cold-worked cubic metals: Experiments and constitutive modeling10.1016/j.ijplas.2020.102700 ↗
40. Deformation behavior of Al–Cu–Mn alloy sheets under biaxial stress at cryogenic temperatures10.1016/j.msea.2019.05.047 ↗
41. Characterization of thermodynamic response by materials testing10.1016/S0079-6425(98)00007-3 ↗
42. Experimental and crystal plasticity study on deformation bands in single crystal and multi-crystal pure Aluminium10.1016/j.actamat.2019.11.006 ↗
43. Slip-induced mechanism of the orientation-dependent deformation banding in cold rolled Al-Mg alloy10.1016/j.matchar.2022.111732 ↗
44. Slip band formation and mobile dislocation density generation in high rate deformation of single fcc crystals10.1080/14786430802129833 ↗
45. Quantitative analysis of the influences of pre-treatments on the microstructure evolution and mechanical properties during artificial ageing of an Al–Cu–Li–Mg–Ag alloy10.1016/j.msea.2020.139253 ↗
46. Microstructure characteristics of an ultra-high strength extruded Al-4.7Cu-1Li-0.5Mg-0.1Zr-1Zn alloy during heat treatment10.1016/j.jallcom.2019.152216 ↗
47. A predictive mechanism for dynamic strain ageing in aluminium-magnesium alloys10.1038/nmat1765 ↗
48. Microstructures and mechanical properties of spray deposited 2195 Al-Cu-Li alloy through thermo-mechanical processing10.1016/j.msea.2018.04.116 ↗
49. Effect of inter-annealing between two stages of extrusion on the microstructure and mechanical property for spray deposited Al–Cu–Li alloy 219510.1016/j.jmrt.2019.06.052 ↗
50. Systematic study of stacking fault energies of random Al-based alloys10.1016/S1359-6454(97)00432-1 ↗
51. Study of work hardening of quenched and naturally aged Al–Mg and Al–Cu alloys10.1016/j.msea.2008.10.010 ↗
52. Deformation structures and strengthening mechanisms in an Al-Cu alloy subjected to extensive cold rolling10.1016/j.msea.2017.07.001 ↗
53. Solute strengthening of both mobile and forest dislocations: the origin of dynamic strain aging in fcc metals10.1016/j.actamat.2008.04.027 ↗
54. Plastic instabilities and dislocation densities during plastic deformation in Al–Mg alloys10.1016/j.msea.2006.09.019 ↗
55. On the origin of planar slip in fcc alloys10.1016/0001-6160(89)90143-0 ↗
56. Electromagnetic forming facilitates the transition of deformation mechanism in 5052 aluminum alloy10.1016/j.msea.2016.07.039 ↗
57. Statistically motivated model of mechanisms controlling evolution of deformation band substructure10.1016/j.ijplas.2016.01.016 ↗
58. A crystal plasticity model of a formation of a deformation band structure10.1080/14786435.2015.1090638 ↗