Microstructure evolution and mechanical properties of Ti-Ni-Al ternary Metallic-Intermetallic Laminate (MIL) composites
Source abstract
Abstract
Metallic-Intermetallic Laminate (MIL) composites of Titanium-nickel-aluminum ternary system were fabricated and investigated for the microstructure evolution, reaction process, and mechanical property. The results show that Ni-Ti produces three intermetallics: Ni 3Ti, NiTi, and Ti 2Ni. Ni-Al produces four kinds of intermetallics in turn with the reaction: NiAl 3, Ni 2Al 3, NiAl, and Ni 3Al. The Ni-Al diffusion reaction rate is faster than that of Ni-Ti. The extent of the Ni-Al reaction is more affected by the reaction time, but the Ni-Ti reaction is more sensitive to temperature increase, which results from the α phase of titanium changing to the β phase when the temperature is higher than transition point, and Ni diffuses faster in β-Ti. Some special network-like, island-like structure and needle-like Ti 2 Ni organizations were found in the Ti6Al4V layer due to the different diffusion rates of Ni in the α and β phases of Ti6Al4V. Compression tests show that the mechanical properties of MIL are strongly correlated with the type and number of layers of Ni-Al intermetallic. The strength and toughness of the specimen reacted at 710 °C for 5 h are improved compared to the other specimens, the compressive strength and failure strain reached 1900 MPa and 0.35, respectively.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. The conflicts between strength and toughness10.1038/nmat3115 ↗
2. High-strength and high-ductility nanostructured and amorphous metallic materials10.1002/adma.201401595 ↗
3. Materials science. The future of metals10.1126/science.1185866 ↗
4. Deformation and fracture evolution of FeAl-based metallic-intermetallic laminate (MIL) composites10.1016/j.actamat.2020.04.005 ↗
5. Metallic glasses10.1016/S1359-0286(97)80081-2 ↗
6. Protection mechanisms of the iron-plated armor of a deep-sea hydrothermal vent gastropod10.1073/pnas.0912988107 ↗
7. Role of layered structure in ductility improvement of layered Ti-Al metal composite10.1016/j.actamat.2018.05.005 ↗
8. Effects of ductile phase volume fraction on the mechanical properties of Ti–Al3Ti metal-intermetallic laminate (MIL) composites10.1016/j.msea.2010.12.087 ↗
9. Microstructure evolution in metal-intermetallic laminate (MIL) composites synthesized by reactive foil sintering in air10.1007/s11661-001-0237-0 ↗
10. Study of the microstructure modulation and phase formation of Ti-Al3Ti laminated composites10.1016/j.vacuum.2018.09.002 ↗
11. A new strategy for fabrication of unique heterostructured titanium laminates and visually tracking their synchronous evolution of strain partitions versus microstructure10.1016/j.jmst.2021.08.016 ↗
12. Fracture behavior of Ti/Al3Ti metal-intermetallic laminate (MIL) composite under dynamic loading10.1016/j.msea.2015.04.025 ↗
13. EBSD investigation on the interface microstructure evolution of Ti-Al3Ti laminated composites during the preparation process10.1016/j.matchar.2020.110374 ↗
14. Finite element analysis of thermal stresses in Ti-Al3Ti metal-intermetallic laminated composites10.1016/j.rinp.2019.102706 ↗
15. Microstructure evolution in pure Ni and Invar-based Metallic-Intermetallic Laminate (MIL) composites10.1016/j.msea.2016.11.033 ↗
16. Fabrication, characterization and tensile property of a novel Ti2Ni/TiNi micro-laminated composite10.1016/j.matdes.2015.12.014 ↗
17. Design, fabrication and characterization of FeAl-based metallic-intermetallic laminate (MIL) composites10.1016/j.actamat.2019.06.039 ↗
18. Microstructures and properties of AlMgTi-based metal-intermetallic laminate composites by dual-steps vacuum hot pressing10.3390/ma13183932 ↗
19. Al/Ni formation reactions: characterization of the metastable Al9Ni2 phase and analysis of its formation10.1016/S1359-6454(03)00211-8 ↗
20. Deformation behavior and fracture mechanism of a novel laminated Ni/Al sheets during in-situ tensile process10.1016/j.msea.2021.142050 ↗
21. Effects of Ni foil thickness on the microstructure and tensile properties of reaction synthesized multilayer composites10.1016/j.msea.2006.09.082 ↗
22. Mechanical properties and deformation behavior of laminated Ni-(Ni2Al3 + NiAl3) and Ni-(Ni3Al + NiAl) composites10.1016/j.msea.2013.08.002 ↗
23. Enhanced growth of intermetallic phases in the Ni–Ti system by current effects10.1016/S1359-6454(03)00284-2 ↗
24. First-principles studies of Al–Ni intermetallic compounds10.1016/j.jssc.2009.07.026 ↗
25. Fabrication of laminated metal–intermetallic composites by interlayer in-situ reaction10.1023/A:1004624012683 ↗
26. Intermetallic formation and mechanical properties of Ni-Ti diffusion couples10.1016/j.matdes.2017.05.055 ↗
27. Diffusion research in BCC Ti-Al-Ni ternary alloys10.1007/s11669-017-0544-9 ↗
28. Ternary diffusion and thermodynamic interaction in the β solid solutions of Ti–Al–Fe alloys at 1423K10.1016/j.jallcom.2012.07.117 ↗
29. Interaction between Ni/Ti Nanomultilayers and Bulk Ti-6Al-4V during heat treatment10.3390/met8110878 ↗
30. Diffusion in the titanium-nickel system: I. Occurrence and growth of the various intermetallic compounds10.1007/BF02644146 ↗
31. The effects of thickness of original Ti foils on the microstructures and mechanical properties of Ti2Ni/TiNi laminated composites10.1016/j.msea.2016.12.070 ↗
32. Microstructures and room-temperature compressive properties of Ti6Al4V alloy processed by continuous multistep hydrogenation treatment10.1016/j.ijhydene.2020.06.265 ↗
33. Synthetic multifunctional metallic-intermetallic laminate composites10.1007/s11837-005-0229-4 ↗
34. Microstructural characterisation and mechanical response of laminated Ni-intermetallic composites synthesised using Ni sheets and Al foils10.1016/j.matchar.2012.05.007 ↗