journal article·2023-01

Effect of carbon fiber preform structures on the mechanical properties of Cf@PyC/SiC composites

Jiahui Ding, Shifeng Wen, Lu Fu, Tao Feng, Hongjiao Lin, Mingde Tong, Xianglei Liu

Publisher page

Abstract

C f @PyC/SiC composites, using needle-punched preforms, 3D orthogonal woven preforms and 3D 4-step braided preforms (braiding angles of 10°, 20° and 30°) as the reinforcement, were obtained through chemical vapor infiltration (CVI) method. The tensile strength before and after oxidation of the composites were investigated, and the microstructure, appearance of fracture and phase component of the composites were also analyzed. The results show that the mechanical properties and oxidation resistance of composites are greatly affected by the preform structures. The tensile strengths of 3D 4-step braided composites with the braiding angle of 10° are the best among all composites before and after oxidation, which are 266.40 ± 16.98 MPa and 238.66 ± 14.98 MPa. Before oxidation, the fibers and matrix at the fracture of 3D 4-step braided composites are in staggered distribution. The mechanical enhancement mechanisms of composites such as crack deflection, interface debonding and fiber pull-out, were beneficial to good performance and excellent mechanical properties. After oxidation, the deflection and branching effects of the interface on the crack are not fully manifested, and enhancement and toughening mechanisms are not fully played due to the oxidation of the carbon fiber and the PyC interface.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties · Mechanical Behavior of Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Recent advances in the development of aerospace materials10.1016/j.paerosci.2018.01.001 ↗
2. Effect of SiCnws on flexural strength of SiCf/HfC-SiC10.1016/j.jeurceramsoc.2021.06.051 ↗
3. Mechanical and oxidation properties of C/SiC corrugated lattice core composite sandwich panels10.1016/j.compstruct.2016.09.034 ↗
4. Recent advances in transition metal oxides with different dimensions as electrodes for high‑performance supercapacitors10.1007/s42114-021-00358-2 ↗
5. Morphology controlled hierarchical NiS/carbon hexahedrons derived from nitrilotriacetic acid-assembly strategy for high-performance hybrid supercapacitors10.1016/j.cej.2021.133673 ↗
6. Co3O4 nanoparticle-dotted hierarchical-assembled carbon nanosheet framework catalysts with the formation/ decomposition mechanisms of Li2O2 for smart lithium–oxygen batteries10.1039/D1QI01260F ↗
7. NiS nanoparticles assembled on biological cell walls-derived porous hollow carbon spheres as a novel battery-type electrode for hybrid supercapacitor10.1007/s10853-020-05022-6 ↗
8. Effect of silicon addition on the microstructure, mechanical and thermal properties of Cf/SiC composite prepared via selective laser sintering10.1016/j.jallcom.2019.04.129 ↗
9. ZrB2-SiC ceramics coating for Cf/SiC composites: microstructure and anti-ablation mechanism10.1016/j.jallcom.2018.04.009 ↗
10. Effect of PyC interface phase on the cyclic ablation resistance and flexural properties of two-dimensional Cf/HfC10.1016/j.jeurceramsoc.2020.08.049 ↗
11. Mechanical property and toughening mechanism of 2.5D C/C-SiC composites with high textured pyrocarbon interface10.1016/j.ceramint.2021.07.081 ↗
12. Flexural properties of cyclic ablated SiCf/HfC-SiC composites10.1016/j.ceramint.2021.01.146 ↗
13. Research progress of mechanical behaviors of ceramic matrix composites
14. Y. Deng, Study on temperature-dependent mechanical properties and theoretical characterization methods of fiber reinforced ceramic matrix composites, Chongqing University, 2020.
15. Fiber-reinforced silicon carbide ceramic
16. Hu · 2021
17. Xiao · 2016
18. High performance fiber
19. Multi-scale modelling of progressive damage and failure behaviour of 2D woven SiC/SiC composites10.1016/j.ceramint.2021.07.043 ↗
20. Compression after multiple low velocity impacts of NCF, 2D and 3D woven composites, Compos
21. Fully-reversed tension-compression fatigue of 2D and 3D woven polymer matrix composites at elevated temperature10.1016/j.polymertesting.2021.107179 ↗
22. On the tensile behaviors of 2D twill woven SiO2f/SiO2 composites at ambient and elevated temperatures: Mesoscale analysis and in situ experimental investigation10.1016/j.ceramint.2021.01.128 ↗
23. Monotonic tension behavior of 2D woven oxide/oxide ceramic matrix composites at ultra-high temperature10.1016/j.jeurceramsoc.2021.01.001 ↗
24. Microstructure and tensile behavior of multiply needle-punched C/SiC composite fabricated by chemical vapor infiltration10.1016/j.jmatprotec.2008.02.035 ↗
25. B.H. Gu, B.Z. Sun, Design of Textile Composites, Donghua University Press, Shanghai, 2018.
26. The prediction on mechanical properties of 4-step braided composites via two-scale method10.1016/j.compscitech.2006.08.028 ↗
27. Effects of fiber volume fraction on the densification and mechanical properties of unidirectional SiCf/SiC-matrix10.1016/j.jeurceramsoc.2020.09.024 ↗
28. Improvement of the mechanical and thermophysical properties of C/SiC composites fabricated by liquid silicon infiltration10.1016/j.compscitech.2015.04.019 ↗
29. Mechanical and electromagnetic shielding properties of carbon fiber reinforced silicon carbide matrix composites10.1016/j.carbon.2015.08.011 ↗
30. B.C. Guo, Nonwovens and Engineering (Chinese), China Textile & Apparel Press, Beijing, 2010.