journal article·2022-12

Insight into the role of air-annealing Cu2ZnSnS4 precursor films in improving efficiency of Cu2ZnSn(S,Se)4 solar cells

Dongxu Zhang, Bin Yao, Yongfeng Li, Zhanhui Ding, Chunkai Wang, Jiayong Zhang, Ting Wang, Ding Ma, Yue Liu

Publisher page

Abstract

It is well known that low power conversion efficiency (PCE) has been key issue need resolve for Cu 2ZnSn(S,Se) 4 (CZTSSe) solar cells. In this work, we tried to improve the PCE by annealing Cu 2ZnSnS 4 (CZTS) precursor films in a temperature ranging from 100 oC to 500 o C in air before preparing CZTSSe absorber through selenization of the CZTS, and study influence mechanism of the air-annealing on PCE of CZTSSe solar cells by quantitative analysis. The results show that the PCE of the CZTSSe solar cell increases from 7.50% to 8.94% as the temperature increases from room temperature to 100 oC and decreases from 8.94% to 5.09% from 100 oC to 500 oC. By quantitative analysis of contribution degree of V oc, J sc and FF to PCE and of J 0, J L, R s and R sh to V oc, J sc and FF, it is calculated that contribution degree of J 0, R s, J L and R sh to the increased PCE is 50.47%, 38.43%, 9.80% and 1.30%, respectively, and to the decreased PCE is − 67.68%, − 22.38%, − 1.01% and − 8.93%, respectively. It is deduced by XRD, Raman and EDS measurements that the J 0 is mainly determined by interfacial recombination induced by [2Cu Zn + Sn Zn] defect cluster near the surface of the CZTSSe, and the R s is by crystal quality of CZTSSe and amount of Zn(S,Se) near surface of the CZTSSe. The change of the [2Cu Zn + Sn Zn], Zn(S,Se) and crystal quality should be attributed to that of O content near surface of CZTS induced by air-annealing.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Impact of minor phases on the performances of CZTSSe thin-film solar cells10.1021/acs.chemmater.6b00069 ↗
2. Low band gap liquid-processed CZTSe solar cell with 10.1% efficiency10.1039/c2ee00056c ↗
3. Band tail engineering in kesterite Cu2ZnSn(S,Se)4 thin-film solar cells with 11.8% efficiency10.1021/acs.jpclett.8b01433 ↗
4. Prospects and performance limitations for Cu-Zn-Sn-S-Se photovoltaic technology
5. The path towards a high-performance solution-processed kesterite solar cell10.1016/j.solmat.2010.11.028 ↗
6. Enhancing CZTSSe solar cells through electric field induced ion migration10.1039/D1TA10638D ↗
7. The state and future prospects of kesterite photovoltaics10.1039/c3ee41781f ↗
8. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
9. An effective air heat-treatment strategy of precursor films in search of high open-circuit voltage for efficient CZTSSe cells10.1016/j.solmat.2022.111662 ↗
10. Institute of Physics, Chinese Academy of Sciences. 〈http://www.iop.cas.cn/xwzx/kydt/202206/t20220628_6466887.html〉, 2022 (Accessed 28 June 2022).
11. Cd-Free Cu(In,Ga)(Se,S)2 thin-film solar cell with record efficiency of 23.35%10.1109/JPHOTOV.2019.2937218 ↗
12. Solar cell efficiency tables (version 51)10.1002/pip.2978 ↗
13. Long lifetimes in high-efficiency Cu(In,Ga)Se2 solar cells10.1063/1.2957983 ↗
14. Beyond 11% efficient sulfide kesterite Cu2ZnxCd1–xSnS4 Solar
15. Interface engineering of CdS/CZTSSe heterojunctions for enhancing the Cu2ZnSn(S,Se)4 solar cell efficiency10.1016/j.mtener.2019.05.015 ↗
16. Sn4+ precursor enables 12.4% efficient kesterite solar cell from DMSO solution with open circuit voltage deficit below 0.30 V10.1007/s40843-020-1408-x ↗
17. Significantly improving the crystal growth of a Cu2ZnSn(S,Se)4 absorber layer by air-annealing a Cu2ZnSnS4 Precursor Thin Film10.1021/acsami.0c12630 ↗
18. Surface preparation for 10% efficient CZTSe solar cells10.1002/pip.3356 ↗
19. Improvement of photovoltaic performance of Cu2ZnSn(S,Se)4 solar cells by modification of back electrode interface with amorphous boron nitride
20. Improvement of power conversion efficiency of Cu2ZnSn(S,Se)4 solar cells by Al doped CdS10.1016/j.physb.2022.414083 ↗
21. Efficiency enhancement of Cu2ZnSn(S, Se)4 solar cells by addition a CuSe intermediate layer between Cu2ZnSn(S, Se)4 and Mo electrode10.1016/j.jallcom.2022.165056 ↗
22. Influencing mechanism of the selenization temperature and time on the power conversion efficiency of Cu2ZnSn(S,Se)4-based solar cells10.1021/acsami.6b05201 ↗
23. Significantly enhancing the stability of a Cu2ZnSnS4 aqueous/ethanol-based precursor solution and its application in Cu2ZnSn(S,Se)4 solar cells10.1039/C5RA23015B ↗
24. Growth of large grain-size Cu2ZnSn(SxSe1−x)4 thin films by annealing precursors sputtered from a single quaternary target for solar cells application10.1016/j.spmi.2017.05.036 ↗
25. Influence of compositionally induced defects on the vibrational properties of device grade Cu2ZnSnSe4 absorbers for kesterite based solar cells10.1063/1.4913262 ↗
26. Polarized Raman spectroscopy of Cu-poor and Zn-rich single-crystal Cu2ZnSnSe410.1063/1.4900560 ↗
27. Promising Cd-free double buffer layer in CZTSSe thin film solar cells10.1007/s40843-020-1419-8 ↗
28. A Raman study of CdSe and ZnSe nanostructures10.1166/jnn.2002.138 ↗
29. Defects and surface electrical property transformation induced by elemental interdiffusion at the p-n heterojunction via high-temperature annealing10.1021/acsami.1c00096 ↗
30. Raman scattering analysis of the surface chemistry of kesterites: Impact of post-deposition annealing and Cu/Zn reordering on solar cell performance10.1016/j.solmat.2016.07.009 ↗
31. Insight into the role of post-annealing in air for high efficient Cu2ZnSn(S,Se)4 solar cells10.1016/j.solmat.2018.03.029 ↗
32. Classification of lattice defects in the kesterite Cu2ZnSnS4 and Cu2ZnSnSe4 earth-abundant solar cell absorbers10.1002/adma.201203146 ↗
33. Numerical study of CZTS/CZTSSe tandem thin film solar cell using SCAPS-1D10.1016/j.ijleo.2021.167320 ↗
34. Study of role of different defects on the performance of CZTSe solar cells using SCAPS10.1016/j.ijleo.2019.163245 ↗
35. Comparison of theoretical and experimental results for band-gap-graded CZTSSe solar cell10.1016/j.cap.2017.06.003 ↗
36. Variation of quantum efficiency in CZTSSe solar cells with temperature and bias dependence by SCAPS simulation
37. A comparative study on the performance of Kesterite based thin film solar cells using SCAPS simulation program10.1016/j.spmi.2015.02.020 ↗
38. Compositional grading of CZTSSe alloy using exponential and uniform grading laws in SCAPS-ID simulation10.1016/j.spmi.2016.02.019 ↗
39. Influence of WSe2 buffer layer at back electrode on performance of Cu2ZnSn(S,Se)4 solar cells10.1016/j.solener.2020.02.033 ↗