journal article·2022-12

Construction of high-performance LiMn0.8Fe0.2PO4/C cathode by using quinoline soluble substance from coal pitch as carbon source for lithium ion batteries

Zhen-yu Song, Shi-lin Chen, Shuo Du, Chang-ling Fan

Publisher page

Abstract

LiMn 0.8Fe 0.2PO 4 nanocrystal composite cathode material for lithium ion batteries was prepared via a simple solvothermal method. The quinoline soluble substance from coal pitch (QS) was used as the coated carbon source to prepare LiMn 0.8Fe 0.2PO 4 /C. The structural performance of QS and QS-C, and the effects of QS-C on the physical, chemical and electrochemical properties of LiMn 0.8Fe 0.2PO 4 /C were investigated. The research shows that QS is an aromatic compound containing C–N and C–S bonds, and the structure of QS-C is a streamlined structure with high graphitization degree. Hence, the N, S-dual doped carbon conductive network can be effectively established to enhance charge transfer and the diffusion and migration rate of lithium ion. The prepared LiMn 0.8Fe 0.2PO 4/C delivery excellent specific discharge capacity of 159.2, 145.7, and 117.3 mAh·g -1 at 0.1, 1, and 5 C, respectively. After 150 cycles at 1 C, the specific discharge capacity was still 133.5 mAh·g -1, and the capacity retention is 93%. This work provides a new insight into the search for coated carbon sources.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Heterogeneous carbon/N-doped reduced graphene oxide wrapping LiMn0.8Fe0.2PO4 composite for higher performance of lithium ion batteries10.1016/j.apsusc.2018.12.227 ↗
2. Lithium batteries: status, prospects and future10.1016/j.jpowsour.2009.11.048 ↗
3. Synthesis of hierarchical and bridging carbon-coated LiMn0.9Fe0.1PO4 nanostructure as cathode material with improved performance for lithium ion battery10.1016/j.jpowsour.2017.05.067 ↗
4. LiMnPO4 as an advanced cathode material for rechargeable lithium batteries10.1149/1.3125765 ↗
5. High‐performance carbon‐LiMnPO4 nanocomposite cathode for lithium batteries10.1002/adfm.201000469 ↗
6. Mesoporous LiMnPO4/C nanoparticles as high performance cathode material for lithium ion batteries10.1016/j.electacta.2016.08.042 ↗
7. Porous nest-like LiMnPO4 microstructures assembled by nanosheets for lithium ion battery cathodes10.1007/s10854-017-8050-8 ↗
8. LiMnPO4 nanoplate grown via solid-state reaction in molten hydrocarbon for Li-ion battery cathode10.1021/nl1007085 ↗
9. Graphene encapsulated spherical hierarchical superstructures self-assembled by LiFe0.75Mn0.25PO4 nanoplates for high-performance Li-ion batteries10.1016/j.electacta.2016.07.140 ↗
10. Recent advances of Mn‐Rich LiFe1–yMnyPO4 (0.5≤ y <1.0) cathode materials for high energy density lithium ion batteries10.1002/aenm.201601958 ↗
11. Optimized LiFePO4 for lithium battery cathodes10.1149/1.1348257 ↗
12. Performance and degradation of LiFePO4/graphite cells: the impact of water contamination and an evaluation of common electrolyte additives10.1149/1945-7111/abbbbe ↗
13. CNT-embedded LiMn0.8Fe0.2PO4/C microsphere cathode with high rate capability and cycling stability for lithium ion batteries10.1016/j.jallcom.2017.09.338 ↗
14. Solvothermal synthesis of nano LiMn0.9Fe0.1PO4: reaction mechanism and electrochemical properties10.1016/j.jpowsour.2013.12.010 ↗
15. Synthesis of Er-doped LiMnPO4/C by a sol-assisted hydrothermal process with superior rate capability10.1016/j.jelechem.2018.10.062 ↗
16. Acetylene black-embedded LiMn0.8Fe0.2PO4/C composite as cathode for lithium ion battery10.1016/j.jpowsour.2013.01.019 ↗
17. Green and efficient synthesis of micro-nano LiMn0.8Fe0.2PO4/C composite with high-rate performance for Li-ion battery10.1016/j.electacta.2021.138456 ↗
18. Double carbon coating of LiFePO4 as high rate electrode for rechargeable lithium batteries10.1002/adma.200904027 ↗
19. Electrochemical properties of LiFePO4/C composite cathode material: carbon coating by the precursor method and direct addition10.1016/j.jpcs.2007.10.047 ↗
20. Effects of different carbon sources on performance of LiFePO4/C composite material
21. Synthesis of high-performance LiMnPO4/C/rGO composite via a mechanical-activation-assisted polyol process10.1007/s11581-016-1682-5 ↗
22. Enhanced electrochemical properties of LiMnPO4/C composites by tailoring polydopamine-derived carbon coating10.1016/j.electacta.2015.07.018 ↗
23. Jiang · 2009
24. Microstructure and performance of carbonization products of component from soft coal pitch10.1016/j.jscs.2016.06.003 ↗
25. Nitrogen and sulfur co-doped porous carbon derived from bio-waste as a promising electrocatalyst for zinc-air battery10.1016/j.energy.2017.10.110 ↗
26. Single-step synthesis of PtRu/N-doped graphene for methanol electrocatalytic oxidation10.1016/j.electacta.2013.12.062 ↗
27. Comparative study of LiMnPO4 cathode materials synthesized by solvothermal methods using different manganese salts10.1039/C3CE41567H ↗
28. A high performance sulfur-doped disordered carbon anode for sodium ion batteries10.1039/C5EE01985K ↗
29. Mesoporous TiO2@ N-doped carbon composite nanospheres synthesized by the direct carbonization of surfactants after solgel process for superior lithium storage10.1039/C6NR08885F ↗
30. Carbonization of naphthalene and dimethylnaphthalene10.1016/0008-6223(84)90176-3 ↗
31. Study on sintering curves of C-SiC-B (4) C composites
32. Structure, performance, morphology and component transformation mechanism of LiMn0.8Fe0.2PO4 nanocrystal with excellent stability10.1016/j.jallcom.2020.155143 ↗
33. Graphene oxide-monohydrated manganese phosphate composites: preparation via modified Hummers method10.1016/j.colsurfa.2018.03.023 ↗
34. On a theory of the van der Waals adsorption of gases10.1021/ja01864a025 ↗
35. Preparation of neodymium‐doped LiMnPO4/C cathode by sol‐gel method with excellent electrochemical performance for lithium‐ion batteries10.1002/er.6546 ↗
36. Nanoscale morphology dependent pseudocapacitance of NiO: influence of intercalating anions during synthesis10.1039/C0NR00555J ↗
37. The use of nitrogen-doped graphene supporting Pt nanoparticles as a catalyst for methanol electrocatalytic oxidation10.1016/j.carbon.2012.09.019 ↗
38. Nitrogen-doped activated carbon for a high energy hybrid supercapacitor10.1039/C5EE03149D ↗
39. Interconnected highly graphitic carbon nanosheets derived from wheat stalk as high performance anode materials for lithium ion batteries10.1039/C5GC02122G ↗
40. Nitrogen-doped graphene nanosheets with excellent lithium storage properties10.1039/c1jm00049g ↗
41. Rich sulfur doped porous carbon materials derived from ginkgo leaves for multiple electrochemical energy storage devices10.1039/C6TA08169J ↗
42. Solvothermal synthesis of LiFePO4 nanorods as high-performance cathode materials for lithium ion batteries10.1016/j.ceramint.2016.03.165 ↗
43. Solvothermal-assisted morphology evolution of nanostructured LiMnPO4 as high-performance lithium-ion batteries cathode10.1016/j.jmst.2018.04.017 ↗