journal article·2022-12

Evaluation of the macro/microstructure of Al/Cu/Sn/Ni multi-layered composite produced by accumulative-roll-bonding (ARB) and post-heat treatment

M.M. Mahdavian, A.R. Khodabandeh, H.R. Jafarian, Sh. Mirdamadi

Publisher page

Abstract

In this study, an Al/Cu/Sn/Ni multi-layer composite (MLC) was produced by a two-step process (i.e., accumulative roll bonding and subsequent heat treatment) for up to six cycles. The effect of the two-step process on the macro/microstructure of the Al/Cu/Sn/Ni MLC was investigated using optical microscopy, scanning electron microscopy, transmission electron microscopy, scanning transmission electron microscopy, and x-ray diffraction pattern. The results show that the Ni and Sn layers in the sandwich cycle and the Cu layer in the 1st cycle fractured in the Al matrix. Finally, during the 6th cycle of the two-step process, a uniform distribution of Ni, Cu, and Sn reinforcement layers was achieved in the Al matrix. Moreover, during the 3rd cycle, an Al 3Ni 2 intermetallic compound was formed at the interface of the Al/Ni layer. Also, during the 6th cycle, in addition to the formation of the Al 3Ni 2 , an AlCu intermetallic compound was formed at the interface of the Al/Cu layer. The recrystallization phenomenon in the Al matrix occurred during the sandwich, 3rd, and 6th cycles, too. In addition, during the various cycles, grain growth also occurred in the Al matrix so that the size of some grains in the Al matrix during the 3rd and 6th cycles reached about 2 and 1 µm, respectively.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. Fracture resistance of aluminum multilayer composites10.1016/j.engfracmech.2012.11.007 ↗
2. Mechanical behavior of laminated metal composites10.1179/imr.1996.41.5.169 ↗
3. The fatigue and fracture toughness of laminated composites based on 7075-T6 Al alloy10.1016/0010-4361(76)90278-0 ↗
4. Enhanced strength and ductility of Al-SiC nanocomposites synthesized by accumulative rollbonding10.1016/j.jmrt.2019.10.077 ↗
5. Investigation of structure and mechanical properties of multi-layered Al/Cu composite produced by accumulative roll bonding (ARB) process10.1016/j.compscitech.2008.02.029 ↗
6. Investigation of mechanical properties and structure of multilayered Al/Ni composites produced by accumulative roll bonding (ARB) process10.1016/j.jallcom.2009.09.022 ↗
7. Investigation on microstructure and mechanical properties of Al–Zn composite during accumulative roll bonding (ARB) process10.1016/j.msea.2011.09.040 ↗
8. Production of Al/Sn multilayer composite by accumulative roll bonding (ARB): a study of microstructure and mechanical properties10.1016/j.msea.2016.02.070 ↗
9. Microstructure and mechanical behaviors of Al/Cu laminated composites fabricated by accumulative roll bonding and intermediate annealing10.1016/j.msea.2021.142510 ↗
10. Cu/Zr nanoscaled multi-stacks fabricated by accumulative roll bonding10.1016/j.jallcom.2010.02.201 ↗
11. The ffect of strain on the formation of an intermetallic layer in an Al-Ni laminated composite10.3390/met7100445 ↗
12. Study on the microstructure and mechanical properties of multilayer Cu/Ni composite processed by accumulative roll bonding10.1016/j.msea.2012.09.021 ↗
13. Developing the Cu/Sn multilayer composite through Accumulative Roll Bonding (ARB): investigating the microstructural and mechanical features
14. Macrostructure evolution and mechanical properties of accumulative roll bonded Al/Cu/Sn multilayer composite10.1016/j.jallcom.2017.01.300 ↗
15. Fabrication of Al/Ni/Cu composite by accumulative roll bonding and, electroplating processes and investigation of its microstructure and mechanical properties10.1016/j.msea.2012.08.017 ↗
16. Microstructure and mechanical properties of Tri-metal Al/Ti/Mg laminated composite processed by accumulative roll bonding10.1016/j.msea.2014.12.067 ↗
17. Accumulative roll bonding of multilayered Cu/Zn/Al: an evaluation of microstructure and mechanical properties10.1016/j.msea.2013.05.002 ↗
18. Microstructure and mechanical properties of SiC-particle strengthening tri-metal Al/Cu/Ni composite produced by accumulative roll bonding process10.1007/s12613-018-1579-6 ↗
19. Microstructure and mechanical properties of the Ni/Ti/Nb multilayer composite manufactured by accumulative pack-roll bonding10.3390/met10030354 ↗
20. Deformation textures of aluminum in a multilayered Ti/Al/Nb composite severely deformed by accumulative roll bonding10.1016/j.matchar.2015.07.011 ↗
21. Microstructure and mechanical properties of Ni/Ti/Al/Cu composite produced by accumulative roll bonding (ARB) at room temperature10.1016/j.jmrt.2020.03.077 ↗
22. Microstructure analysis and observation of peculiar mechanical properties of Al/Cu/Zn/Ni multi-layered composite produced by Accumulative-Roll-Bonding (ARB)10.1016/j.msea.2020.140556 ↗
23. Ni particle embedded Al matrix composite with high ductility10.1016/j.matlet.2009.12.030 ↗
24. Wear behavior of Al–Sn alloys with different distribution of Sn dispersoids manipulated by mechanical alloying and sintering10.1016/j.wear.2008.04.050 ↗
25. Strength prediction of multi-layered copper-based composites fabricated by accumulative roll bonding10.1016/S1003-6326(21)65611-X ↗
26. Review on superior strength and enhanced ductility of metallic nanomaterials10.1016/j.pmatsci.2018.02.002 ↗
27. Dieter · 1961 · 158
28. Annealing-induced hardening in ultrafine-grained and nanocrystalline materials
29. Annealing behavior of solution treated and aged Al-0.2wt% Sc deformed by ARB
30. Change in microstructure during annealing of ultrafine grained aluminum produced by ARB10.4028/www.scientific.net/MSF.396-402.423 ↗
31. mechanical properties and interface evaluation of Al/ AZ31 multilayer composites produced by ARB at different rolling temperatures10.1007/s11665-018-3423-6 ↗
32. The effect of strain on the formation of an intermetallic layer in an Al-Ni laminated composite10.3390/met7100445 ↗
33. Al/Ni metal intermetallic composite produced by accumulative roll bonding and reaction annealing10.1016/j.jallcom.2011.07.103 ↗
34. Enhanced mechanical properties of lamellar Cu/Al composites processed via high-temperature accumulative roll bonding10.1016/S1003-6326(19)65069-7 ↗
35. Accumulative roll bonding (ARB) of the composite coated strips to fabricate multi-component Al-based metal matrix composites10.1016/j.msea.2015.09.006 ↗
36. Deformation structures and textures in coldrolled 70:30 brass10.1179/030634578790433909 ↗
37. The deformation microstructure and recrystallization behavior of warm rolled steels10.2355/isijinternational.42.751 ↗
38. Characterizing the elastic and plastic properties of the multilayered Al/Brass composite produced by ARB using DIC10.1016/j.msea.2019.03.002 ↗
39. Nanostructured Al/SiC-graphite composites produced by Accumulative Roll Bonding: role of graphite on microstructure, wear and tensile behavior10.1007/s11665-017-2608-8 ↗
40. Ultra fine grained bulk aluminum produced by accumulative roll bonding (ARB) process10.1016/S1359-6462(98)00302-9 ↗
41. Preferential nucleation of dynamic recrystallization at triple junctions10.1016/j.scriptamat.2003.09.035 ↗
42. Ordinary dislocation configurations in high Nb-containing TiAl alloy deformed at high temperatures10.1080/14786435.2016.1267877 ↗
43. A direct comparison between in-situ transmission electron microscopy observations and Dislocation Dynamics simulations of interaction between dislocation and irradiation induced loop in a zirconium alloy10.1016/j.scriptamat.2016.03.029 ↗
44. The effect of annealing temperature on the recrystallization and mechanical properties of severe plastic deformed commercial pure aluminium during ultra-fast annealing
45. A detailed investigation on the grain structure evolution of AA7005 aluminum alloy during hot deformation10.1016/j.matchar.2020.110801 ↗
46. Direct observation of the behavior of grain boundaries during continuous dynamic recrystallization in an Al–4Mg–0.3Sc alloy"10.1016/S1359-6454(03)00262-3 ↗
47. Bulk nanostructured metals and alloys produced by accumulative roll-bonding10.1533/9780857091123.1.40 ↗
48. Effect of friction stir processing on microstructure and mechanical properties of aluminium10.1016/j.msea.2012.01.055 ↗
49. Grain growth behavior of Al2O3 nanomaterials: a review10.4028/www.scientific.net/MSF.653.87 ↗
50. Modelling texture dependent grain growth by 2D Potts model simulations: a detailed analysis10.1016/j.commatsci.2018.08.044 ↗
51. Grain shapes and other metallurgical applications of topology10.1007/s13632-015-0241-1 ↗
52. Effect of grain size on apparent diffusivity in nano crystala-iron by atomistic simulation10.1016/j.commatsci.2016.12.036 ↗
53. high strength and high ductility of ultrafine-grained, interstitialfree steel produced by ECAE and annealing10.1007/s11661-011-1063-7 ↗
54. Generation and interaction mechanisms of prismatic dislocation loops in FCC metals
55. Microstructure evolution and mechanical properties of Cu/Zn multilayer processed by accumulative roll bonding (ARB)10.1016/j.msea.2013.11.026 ↗
56. Characteristics of nano/ultrafine-grained austenitic TRIP steel fabricated by accumulative roll bonding and subsequent annealing10.1016/j.matchar.2016.02.012 ↗