journal article·2022-11

Understanding of the duplex high entropy of FeCoNiCuAl alloys magnetic properties dependence on the CuAl amount and annealing temperature

Cristina Bormio-Nunes, Fábio Martins Cardoso, Rodolfo da Silva Teixeira, Jhonatan Feitoza Bastos

Publisher page

Abstract

High entropy alloys (HEA) FeCoNi(CuAl) x=0.8 and FeCoNi(CuAl) x =1.6 were studied in the form of small arc melted samples (x = 0.8) and also in successfully obtained hot forged strips (x = 1.6). High annealing temperature of 1200 °C was applied to the alloys. The magnetic properties as saturation magnetization (M s ), magnetostriction, coercive field (H c) and remanent induction (B r ) as well as electrical resistivity were measured and correlated to the alloy’s microstructure. The thermomechanical process due to hot rolling as well as the annealing at high temperature kept the FCC phase as the majority phase in the duplex alloy and caused changes in the magnetic properties. The unexpected M s improvement of the alloy with x = 1.6 compared to the one with x = 0.8 was attributed to the Cu segregation originating Cu rich nanoprecipitates, which in turn cause the increase of magnetic elements in the duplex phases. The FeCoNi(CuAl) x =1.6 strip has H c = 260 A/m, B r = 0.162 T, an initial susceptibility (χ in) of 240 and a resistivity of 100 μΩ.cm. The alloy had smaller H c and higher χ in values compared to other FeCoNi(CuAl) x alloys with 0 ≤ x ≤ 1.2.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Effect of elemental interaction on microstructure and mechanical properties of FeCoNiCuAl alloys10.1016/j.msea.2012.07.003 ↗
2. The effects of phase constitution on magnetic and mechanical properties of FeCoNi(CuAl)x (x= 0–1.2) high-entropy alloys10.1016/j.jallcom.2016.09.271 ↗
3. Microstructures and properties of high-entropy alloys10.1016/j.pmatsci.2013.10.001 ↗
4. Cu assisted stabilization and nucleation of L12 precipitates in Al0.3CuFeCrNi2 fcc-based high entropy alloy10.1016/j.actamat.2017.02.053 ↗
5. Precipitation and its strengthening of Cu-rich phase in CrMnFeCoNiCux high-entropy alloys10.1016/j.msea.2017.12.060 ↗
6. Correlation between the magnetic properties and phase constitution of FeCoNi(CuAl)0.8Gax (0 ≤ x ≤ 0.08) high-entropy alloys10.1016/j.jallcom.2018.02.189 ↗
7. Unveiling segregation induced evolution in phase constitution of Cu-containing high-entropy alloys10.1016/j.jallcom.2020.156109 ↗
8. Effects of alloying elements on glass formation, mechanical and soft-magnetic properties of Fe-based metallic glasses10.1016/j.intermet.2011.05.020 ↗
9. Magnetic properties and microstructure of FeCoNi(CuAl)0.8Snx (0 ≤ x ≤ 0.10) high-entropy alloys
10. Effect of Ho addition on AC soft magnetic property, microstructure and magnetic domain of FeCoNi(CuAl)0.8Hox (x = 0–0.07) high-entropy alloys10.1016/j.intermet.2021.107216 ↗
11. Investigation on the thermal expansion behavior of FeCoNi and Fe30Co30Ni30Cr10−xMnx high entropy alloys10.1016/j.matchemphys.2021.124907 ↗
12. Structural analysis and magnetic characterization of ternary alloys (Co–Fe–Ni) synthesized by mechanical alloying10.1016/j.jmrt.2020.10.068 ↗
13. Invar effects in FeNiCo medium entropy alloys: From an Invar treasure map to alloy design
14. Supplemental literature review of binary phase diagrams:Au-La, Ce-Pt, Co-Pt, Cr-S, Cu-Sb, Fe-Ni, Lu-Pd, Ni-S, Pd-Ti,Si-Te, Ta-V, and V-Zn10.1007/s11669-019-00760-w ↗
15. The Co-Fe (Cobalt-Iron) system10.1007/BF02868548 ↗
16. Tailoring the heterogeneous magnetostriction in Fe-Co alloys10.1016/j.jallcom.2016.12.223 ↗
17. Magnetostriction in Nickel Alloys10.1103/PhysRev.138.A1083 ↗
18. A miniature capacitance dilatometer for thermal expansion and magnetostriction10.1063/1.1149009 ↗
19. Core losses in motor laminations exposed to high-frequency or nonsinusoidal excitation10.1109/TIA.2004.834099 ↗
20. Master of science dissertation
21. R.C. O′Handley. Modern Magnetic Materials: Principles and Applications, Chapter 7 pg. 220, 1999, Wiley-lnterscience Publication. ISBN: 978–0-471–15566-9.
22. Villars · 2020
23. Microstructure characterization of AlxCoCrCuFeNi high-entropy alloy system with multiprincipal elements10.1007/s11661-005-0283-0 ↗
24. The magnetic moments and their long-range ordering for fe atoms in a wide variety of metallic environments10.1002/qua.22764 ↗
25. Microstructure and magnetic properties of the FeCoNi(CuAl)0.8Ga0.06 high-entropy alloy during the phase transition10.1016/j.jallcom.2018.11.235 ↗
26. An improved magnetostriction model of silicon steel considering the saturated magnetic domain wall movement10.1063/9.0000026 ↗