journal article·2022-10

Microstructure characteristics and mechanical performance of Fe-Cr-Ni-Al-Ti superalloy fabricated by powder metallurgy

Xiaosheng Zhou, Haokai Dong, Yushuai Wang, Meini Yuan

Publisher page

Abstract

Fe-Cr-Ni-Al-Ti ferritic superalloy was fabricated by hot isostatic pressing (HIP) of Fe-Cr-Ni-Al-Ti gas-atomized powders. Three types of precipitates with difference in particle size, composition and morphologies have been identified in the as-HIPed ferritic alloy. Micron-sized B2-NiAl distributed in the bulk together with L2 1-Ni 2TiAl and Fe(Cr) sub-precipitations are the dominant precipitates. Submicron-sized B2/L2 1 composite precipitates with Fe(Cr)-enriched outer layer and nano-scaled single B2 particles are distributed around the micron-sized B2/ L2 1/ Fe(Cr) composite precipitates. After solution treatment at 1100 °C, various types of precipitates in as-HIPed alloy can be completely dissolved, while dense spherical B2/L2 1 particles are precipitated rapidly even upon water quenching. During aging at 700 °C, the spherical particles evolve into cuboidal morphology and then coarsen and coalesce into large plates. The loss of coherency between the particle and the matrix would produce dense dislocation network at the particle/matrix interface. The measured tensile strength of as-HIPed ferritic superalloy at 700 °C is up to 198 MPa with a total elongation of 47.6%, and the cracks are found to be initiated at the prior particle boundaries, which leads to the failure. To fabricate the high-performance Fe-Cr-Ni-Al-Ti superalloy by powder metallurgy, we suggest that the prior particle boundaries should be avoided during consolidation process.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · High-Temperature Coating Behaviors · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Materials for ultrasupercritical coal power plants—Boiler materials: Part 110.1361/105994901770345394 ↗
2. High-temperature oxidation behavior of modified 4Al alumina-forming austenitic steel: effect of cold rolling10.1016/j.jmst.2020.08.013 ↗
3. The effect of isothermal aging on creep behavior of modified 2.5Al alumina-forming austenitic steel10.1016/j.msea.2020.140219 ↗
4. Effect of Cu addition on microstructure and properties of Fe-20Ni-14Cr alumina-forming austenitic steel10.1016/j.intermet.2021.107312 ↗
5. Tensile strength improvement of martensitic ODS steels with Zr and Hf additions10.1016/j.msea.2021.142071 ↗
6. Recent Progress in microstructural control and solid-state welding of reduced activation ferritic/martensitic steels
7. U.S. program on materials technology for ultra-supercritical coal power plants10.1361/10599490524039 ↗
8. Atom probe tomography study of Fe-Ni-Al-Cr-Ti ferritic steels with hierarchically-structured precipitates10.1016/j.actamat.2017.11.013 ↗
9. Increasing the creep resistance of Fe-Ni-Al-Cr superalloys via Ti additions by optimizing the B2/L21 ratio in composite nano-precipitates10.1016/j.actamat.2018.07.025 ↗
10. Optimization of B2/L21 hierarchical precipitate structure to improve creep resistance of a ferritic Fe-Ni-Al-Cr-Ti superalloy via thermal treatments10.1016/j.scriptamat.2018.10.004 ↗
11. Nano-sized precipitate stability and its controlling factors in a NiAl-strengthened ferritic alloy10.1038/srep16081 ↗
12. Ab initio calculations of elastic constants and thermodynamic properties of NiAl under high pressures10.1016/j.commatsci.2008.05.026 ↗
13. Effect of titanium additions upon microstructure and properties of precipitation-strengthened Fe-Ni-Al-Cr ferritic alloys10.1016/j.actamat.2017.02.028 ↗
14. Coarsening and morphology of β' particles in Fe-Ni-Al-Mo ferritic alloys10.1007/BF02662573 ↗
15. Microstructure characterization of Cu-rich nanoprecipitates in a Fe-2.5Cu-1.5Mn-4.0Ni-1.0Al multicomponent ferritic alloy10.1016/j.actamat.2012.12.034 ↗
16. A hierarchical microstructure due to chemical ordering in the bcc lattice: Early stages of formation in a ferritic Fe–Al–Cr–Ni–Ti alloy10.1016/j.actamat.2015.03.043 ↗
17. Improvement of room and high temperature tensile properties of NiAl-strengthened ferritic heat-resistant steels through Mo addition10.1016/j.msea.2018.05.034 ↗
18. Phase-field simulation of γ' precipitates rafting and creep property of Co-base superalloys10.1016/j.matdes.2020.109077 ↗
19. Sessile dislocations by reactions in NiAl severely deformed at room temperature10.1016/j.jallcom.2014.09.226 ↗
20. Morphological instability of γ' phase in nickel-based powder metallurgy superalloys10.3724/SP.J.1037.2011.00731 ↗
21. Precipitation of α-Cr in B2-ordered NiAl10.1016/S0966-9795(98)00015-6 ↗
22. Effects of Cr on NiAl (β′) precipitation in ferritic Fe-Ni-Al alloys10.1007/s11661-021-06338-x ↗
23. Phase-field simulation of coherent BCC/B2 microstructures in high entropy alloys10.1016/j.actamat.2020.07.030 ↗