Improved mechanical properties of porous nitinol by aluminum alloying
Source abstract
Abstract
Aluminum alloying effects (up to 2 at %) on the macrostructure, microstructure, and mechanical properties of porous nitinol (NiTi) obtained by self-propagating high-temperature synthesis (SHS) were studied. It has been established that Ni and Ti interactions with liquid Al (0.5–1 at % Al) in the SHS process significantly change macrostructure, decrease the size of the interpore bridges, and increase their number, resulting in a larger effective cross-sectional area. An increase in the aluminum content above 1 at % leads to larger interpore bridges in the SHS product. The microhardness of TiNi(Al) increases from 305 HV50 g to 422 HV50 g with aluminum concentration, while the fraction of the TiNi(Al) (B2 + B19′) phases decreases from 75% to 50%. The Ti2Ni(Al) phase fraction increases from 25% to 50% with Al concentration. The 64 MPa tensile strength and 2.9% fracture strain of porous Ti50Ni49Al1 alloy are higher than without Al. The increase in strength is due to the formation of a more homogeneous macrostructure and solid solution strengthening of the alloy-forming phases.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Study on tensile, bending, fatigue, and in vivo behavior of porous SHS-TiNi alloy used as a bone substitute10.1088/1748-605X/aba327 ↗
2. Development and differentiation of mesenchymal bone marrow cells in porous permeable titanium nickelide implants in vitro and in vivo10.1007/s10517-016-3465-4 ↗
3. Microstructure and tribocorrosion properties of NiTi/AlNi2Ti ternary intermetallic alloy10.1016/j.vacuum.2020.109928 ↗
4. Corrosion behaviour of Ti-Ni-Al alloys in a simulated human body solution10.1016/j.jmrt.2017.07.003 ↗
5. Comparison on electrochemical corrosion performances of arc and laser thermal sprayed Al-Ti-Ni coatings in marine environment10.1016/j.matchemphys.2020.123200 ↗
6. The mechanical properties of intermetallic Ni50-xTi50Alx alloys (x ј 6,7,8,9)10.1016/j.intermet.2006.10.038 ↗
7. Effect of alloying on elastic properties of ternary Ni-Al-Ti system: experimental validation10.1016/j.jallcom.2016.07.051 ↗
8. Evolution of lattice defects, disordered/ordered phase transformations and mechanical properties in Ni-Al-Tiintermetallics by high-pressure torsion10.1016/j.jallcom.2013.02.128 ↗
9. Composition optimization of Al-Ni-Ti alloys based on glass-forming ability and preparation of amorphous coating with good wear resistance by plasma spray10.1016/j.surfcoat.2020.126800 ↗
10. Determination of the thermodynamic properties of Ni-Ti, Ni-Al, and Ti-Al, and nickel-rich Ni-Al-Ti melts based on the atom and molecule coexistence theory10.1016/j.molliq.2019.111462 ↗
11. Phase competition in ternary Ti-Ni-Al system10.1016/j.physa.2016.02.068 ↗
12. Alumina–Ti aluminide interpenetrating composites: microstructure and mechanical properties10.1016/S0167-577X(03)00090-9 ↗
13. First-principles investigations of the structural, anisotropic mechanical, thermodynamic and electronic properties of the AlNi2Ti, compound10.3390/cryst8020093 ↗
14. On the constitution of the ternary system AlNiTi10.1016/j.intermet.2007.03.003 ↗
15. Phase evolution during the reactive sintering of ternary Al–Ni–Ti powder compacts10.1016/j.jallcom.2015.11.105 ↗
16. Mechanical behaviour and functional properties of porous Ti-45 at % Ni alloy produced by self-propagating high-temperature synthesis, Smart
17. Compressive behavior of 64% porosity NiTi alloy: an experimental study10.1016/j.msea.2009.03.083 ↗
18. Mechanical properties of nickel-titanium foams for reconstructive orthopedics10.1016/j.msec.2007.02.001 ↗
19. Processing of porous TiNi shape memory alloy from elemental powders by Ar-sintering10.1016/j.matlet.2004.02.017 ↗
20. Combustion synthesis porous nitinol for biomedical applications10.1155/2019/4307461 ↗
21. On the versatility and distinctiveness in the use of microwave energy for the ignition of low exothermic Ni-Tiintermetallics combustion synthesis10.1016/j.matchemphys.2019.05.028 ↗
22. The effect of aging temperature on transformation parameters of porous NiTi shape memory alloy fabricated by SHS10.3103/S1067821213010069 ↗
23. V.I. Itin, Shape-Memory Alloys, 2017, 270–271. 〈https://doi.org/10.1016/B978–0-12–804173-4.00121–6〉.10.1016/B978-0-12-804173-4.00121-6 ↗
24. A comparison of the phase evolution in Ni, Al, and Ti powder mixtures synthesized by SHS and MA processes
25. Ni–Al–Ti coatings obtained by microwave assisted SHS: effect of annealing on microstructural and mechanical properties10.1016/j.surfcoat.2008.11.017 ↗
26. Determination of the thermodynamic properties of Ni-Ti, Ni-Al, and Ti-Al, and nickel-rich Ni-Al-Ti melts based on the atom and molecule coexistence theory
27. Microstructure examination of functionally graded NiTi/NiAl/Ni3Al intermetallic compound produced by self-propagating high-temperature synthesis
28. The ability of systems based on Ni, Al and Ti to be synthesized by self-propagating high-temperature synthesis (SHS)10.1016/S0966-9795(01)00013-9 ↗
29. A study on the phase transformation behavior of Al substituted Ni-rich and Ti-rich Ni–Ti–Al alloys10.1016/j.phpro.2010.11.070 ↗
30. Formation of pores and amorphous-nanocrystalline phases in porous TiNi alloys made by self-propagating high-temperature synthesis (SHS)10.1016/j.apt.2018.12.011 ↗
31. Formation of mineral phases in self-propagating high-temperature synthesis (SHS) of porous TiNi alloy10.1088/2053-1591/ab01a1 ↗
32. Effects of porosity on the mechanical properties of additively manufactured components: a critical review10.1088/2053-1591/abcc5d ↗
33. The porosity calculation of various types of paper using image analysis10.15294/jpfi.v14i1.9878 ↗
34. Crystal-chemical aspects of the stability of the ordered phase B2 in volume alloying of TiNi, shape memory alloys: properties, technologies
35. Lide · 2003
36. Biocompatibility of porous SHS-TiNi10.4028/www.scientific.net/MSF.970.320 ↗
37. Structure, microstructure, and some selected mechanical properties of Ti-Ni Alloys
38. Mechanical behavior and fatigue life of micro welded joints obtained by TIG spots in NiTi wires
39. Microstructure, mechanical properties and shape memory behaviour of friction stir welded nitinol10.1016/j.msea.2017.03.101 ↗
40. Cold pressing dependence on microstructure and electrochemical performance of porous TiNi alloy10.1088/2053-1591/ab3023 ↗
41. Comparative study on microstructure and martensitic transformation of aged Ni-rich NiTi and NiTiCo shape memory alloys10.1007/s12540-016-5603-y ↗
42. Role of inter- and intraparticle diffusion in 659 nonuniform particle size gasless compacted-powder combustion synthesis-I: 660 formulation10.1016/S0017-9310(98)00157-4 ↗
43. Structure and properties of Ni˗Al˗Ti systems formed by combustion synthesis10.4028/www.scientific.net/MSF.991.44 ↗
44. Formation of pores and amorphous-nanocrystalline phases in porous TiNi alloys made by self-propagating high-temperature synthesis (SHS)10.1016/j.apt.2018.12.011 ↗