journal article·2022-09

Fabrication of hydrophobic AlCoCrFeNi high-entropy alloy and superior corrosion resistance to NTO aqueous solution

Manman Wang, Qinghai Shu, Yansong Shi, Chien-Lung Teng, Junfeng Wang, Shaohua Jin, Shusen Chen, Jinfeng Qin, Dongxu Wang

Publisher page

Abstract

Hydrophobic AlCoCrFeNi high-entropy alloy (HEA) was prepared by electrochemical dealloying using 5% of weight percent H 2SO 4 aqueous solution at low temperature. The results of energy-dispersive spectrometer (EDS), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) analyses revealed that the element contents of Al and Ni were greatly reduced after dealloying treatment, leading to the increase of body centered cubic (BCC, Fe-Cr) phase and consequently, the achievement of the protective barrier of Cr- enriched oxide film on the substrate surface. The static water contact angle increased with the extension of dealloying period and reached a maximum value of 127 ± 1°, showing pronounced hydrophobic performance after dealloying treatment. Meanwhile, the AlCoCrFeNi HEA specimens showed excellent mechanical properties involved compressive strength and micro-hardness. Compared with the as-cast AlCoCrFeNi HEA, the HEA specimens after dealloying treatment exhibited superior corrosion resistance in an acidic aqueous solution of 3-nitro-1, 2, 4-triazole-5-one (NTO) aqueous solutions confirmed by potentiodynamic polarization tests and electrochemical impedance spectra (EIS) analyses, which was credited to the Cr- and Fe- enriched oxide and hydrophobic surface.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · Nanoporous metals and alloys · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (65)

Show source-provided references
1. High-entropy alloys: a critical review10.1080/21663831.2014.912690 ↗
2. Alloy design strategies and future trends in high-entropy alloys10.1007/s11837-013-0761-6 ↗
3. Deviation from high-entropy configurations in the atomic distributions of a multi-principal-element alloy10.1038/ncomms6964 ↗
4. Breakthrough applications of high-entropy materials10.1557/jmr.2018.283 ↗
5. High- entropy alloys10.1038/s41578-019-0121-4 ↗
6. More than entropy in high-entropy alloys: forming solid solutions or amorphous phase10.1016/j.intermet.2013.05.002 ↗
7. Recent progress in high-entropy alloys
8. The effect of molybdenum on the corrosion behaviour of the high-entropy alloys Co1.5CrFeNi1.5Ti0.5Mox in aqueous environments10.1016/j.corsci.2010.04.004 ↗
9. Multi-principal-element alloys with improved oxidation and wear resistance for thermal spray coating10.1002/adem.200300507 ↗
10. Homogenization of AlxCoCrFeNi high-entropy alloys with improved corrosion resistance10.1016/j.corsci.2018.01.030 ↗
11. Alloy design and properties optimization of high-entropy alloys10.1007/s11837-012-0366-5 ↗
12. Microstructures and properties of high-entropy alloys10.1016/j.pmatsci.2013.10.001 ↗
13. Microstructure and electrochemical properties of high entropy alloys—a comparison with type-304 stainless steel10.1016/j.corsci.2004.11.008 ↗
14. In-situ electrochemical-AFM study of localized corrosion of AlCoCrFeNi high-entropy alloys in chloride solution10.1016/j.apsusc.2018.01.047 ↗
15. High strength dual fcc phase CoCuFeMnNi high-entropy alloy wires with dislocation wall boundaries stabilized by phase boundaries10.1016/j.msea.2021.141875 ↗
16. Fundamental electronic structure and multiatomic bonding in 13 biocompatible high-entropy alloys10.1038/s41524-020-0321-x ↗
17. Morphology control of 3-nitro-1,2,4-triazole-5-one (NTO) by molecular dynamics simulation10.1039/C8CE00756J ↗
18. Empirical kinetics equation of the synthesis of nto in nitric acid10.1002/prep.201500334 ↗
19. Adsorption and attenuation behavior of 3-nitro-1,2,4-triazol-5-one (NTO) in eleven soils10.1016/j.chemosphere.2015.09.101 ↗
20. Column transport studies of 3-nitro-1,2,4-triazol-5-one (NTO) in soils10.1016/j.chemosphere.2016.12.067 ↗
21. Reduction of 3-nitro-1,2,4-triazol-5-one (NTO) by the hematite-aqueous Fe(II) redox couple10.1021/acs.est.0c03872 ↗
22. Novel surfactants as green corrosion inhibitors for mild steel in 15% HCl: experimental and theoretical studies10.1016/j.cej.2020.126219 ↗
23. Nitrogen significantly enhances corrosion resistance of 316L stainless steel in thiosulfate-chloride solution10.1016/j.corsci.2020.108792 ↗
24. Formation mechanism and corrosion resistance of the hydrophobic coating on anodized magnesium10.1016/j.corsci.2016.05.023 ↗
25. Nanosecond laser fabrication of superhydrophobic surface on 316L stainless steel and corrosion protection application10.1016/j.colsurfa.2020.125259 ↗
26. Superhydrophobic aluminum alloy surfaces prepared by chemical etching process and their corrosion resistance properties10.1016/j.apsusc.2015.08.166 ↗
27. Research on the synergistic effect of megasonic and particles in through mask electrochemical etching process10.1016/j.electacta.2020.137300 ↗
28. Electrochemical dealloying with simultaneous phase separation10.1016/j.actamat.2019.03.039 ↗
29. Intermediate structures of Pt-Ni nanoparticles during selective chemical and electrochemical etching10.1021/acs.jpclett.9b02388 ↗
30. Nickel nanotube array via electroplating and dealloying10.1016/j.tsf.2018.05.015 ↗
31. Methanol electro-oxidation on nano metals formed by dealloying of Ag–Au–Pt alloys10.1007/s10800-016-0978-5 ↗
32. Corrosion-resistant high-entropy alloys: a review10.3390/met7020043 ↗
33. Electrochemical oxide properties of AlxCoCrFeNi (x=0, 0.25, 0.50, 1.00) alloys in sulfuric acids10.1016/j.corsci.2009.11.028 ↗
34. Influence of Cr content on corrosion behaviour of tube pile steel in half-immersion environment10.1007/s12666-017-1156-0 ↗
35. The role of chromium content in the long-term atmospheric corrosion process
36. Experimental study on electrochemical etching for titanium printed circuit heat exchanger channels10.1016/j.jmatprotec.2020.116669 ↗
37. Electrochemical testing of noble metal dental alloys: The influence of their chemical composition on the corrosion resistance10.1016/j.corsci.2021.109412 ↗
38. Electrochemical corrosion of a noble metal-bearing alloy-oxide composite10.1016/j.corsci.2017.04.010 ↗
39. Effect of controlled rolling temperature on microstructure and properties of Mg-9Li-1Zn alloy sheet10.1016/j.jallcom.2020.155296 ↗
40. Microstructure and compressive properties of AlCrFeCoNi high entropy alloy10.1016/j.msea.2008.01.064 ↗
41. Predictive multiphase evolution in Al-containing high-entropy alloys10.1038/s41467-018-06757-2 ↗
42. Microstructure and wear properties of nitrided AlCoCrFeNi high-entropy alloy10.1016/j.matchemphys.2017.05.029 ↗
43. Synergistic effect of 2-mercaptobenzimidazole and octylphosphonic acid as corrosion inhibitors for copper and aluminium – An electrochemical, XPS, FTIR and DFT study
44. Characterization of Cr sorption and reduction on tio2: Batch and XPS Studies10.1007/s11270-014-2252-y ↗
45. Effects of the element La on the corrosion properties of CrMnFeNi high entropy alloys10.1016/j.jallcom.2020.155825 ↗
46. Investigation of surface segregation in Fe-Cr-Si alloys by XPS10.1007/s11661-020-05758-5 ↗
47. Corrosion mechanism of an equimolar AlCoCrFeNi high-entropy alloy additively manufactured by electron beam melting
48. Revealing the assembly mechanism of an octadecylamine based supramolecular complex on mild steel in condensate water: Correlative experimental and theoretical studies10.1016/j.molliq.2019.111446 ↗
49. Fabrication, characterization and efficient surface protection mechanism of poly(trans-cinnamaldehyde) electropolymerized coatings for EH36 steel in simulated seawater10.1016/j.colsurfa.2021.127434 ↗
50. Enhanced corrosion inhibition of aniline derivatives electropolymerized coatings on copper: preparation, characterization and mechanism modeling10.1016/j.apsusc.2020.146086 ↗
51. Using macro and micro electrochemical methods to understand the corrosion behavior of stainless steel thermal spray coatings
52. Effect of aluminum content on microstructure and mechanical properties of AlxCoCrFeMo0.5Ni high-entropy alloys10.1007/s11837-013-0753-6 ↗
53. Frictional wear and corrosion behavior of AlCoCrFeNi high-entropy alloy coatings synthesized by atmospheric plasma spraying10.3390/e22070740 ↗
54. Corrosion mechanism of annealed equiatomic AlCoCrFeNi tri-phase high-entropy alloy in 0.5 M H2SO4 aerated aqueous solution10.1016/j.corsci.2019.06.024 ↗
55. Anti-corrosive mechanism of poly (N-ethylaniline)/sodium silicate electrochemical composites for copper: correlated experimental and in-silico studies10.1016/j.jmst.2020.08.064 ↗
56. Influence of intercritical quenching temperature on microstructure, mechanical properties and corrosion resistance of dual-phase steel10.1007/s11665-020-04928-1 ↗
57. Effect of annealing on mechanical and thermoelectric properties of a Al2CoCrFeNi high-entropy alloy
58. Effects of homogenized treatment on microstructure and mechanical properties of AlCoCrFeNi2.2 near-Eutectic high-entropy alloy10.1007/s40195-021-01196-3 ↗
59. Microstructural evolution, phase formation and mechanical properties of multi-component AlCoCrFeNix alloys10.1007/s00339-019-2959-0 ↗
60. Hierarchical micro/nano-structured nanoimprinting stamp fabrication for superhydrophobic application10.1080/05704928.2016.1165689 ↗
61. Nanosecond laser fabrication of hydrophobic stainless steel surfaces: the impact on microstructure and corrosion resistance10.3390/ma11091577 ↗
62. Hydrophobic coatings for improving corrosion resistance of manganese substrate10.1016/j.surfcoat.2018.04.075 ↗
63. Origin of nanoscale heterogeneity in the surface oxide film protecting stainless steel against corrosion
64. The influence of chromium on the atmospheric corrosion of steel10.1016/S0010-938X(00)00098-6 ↗
65. Effect of the aluminium content of AlxCrFe1.5MnNi0.5 high-entropy alloys on the corrosion behaviour in aqueous environments10.1016/j.corsci.2008.04.011 ↗