Pulsed nanocrystalline plasma electrolytic carburising for corrosion protection of a γ-TiAl alloy
Source abstract
Abstract
A number of studies have been reported on the use of plasma electrolytic carburising technology for surface hardening of different metals for higher corrosion and wear resistance resulted from this technique. However, very few have focused on the optimization of the pulsed nanocrystalline plasma electrolytic carburising process parameters. In this study, a design of experiment (DOE) technique, the Taguchi method, has been used to optimize the pulsed nanocrystalline plasma electrolytic carburising, not only for surface hardening but also for the corrosion protection of Ti-48Al-2Cr-2Nb (at%) titanium alloy by controlling the coating process`s factors. The experimental design consisted of four factors (glycerol concentration, electrical conductivity of electrolyte, applied voltage and duration of process), each containing three levels. All experiments were done under constant frequency and duty cycle of rectangular shape pulse current method. Pure aluminum and titanium carbides were detected by XRD on the surface of the treated samples. Tafel polarization measurements were carried out to determine the corrosion resistance of the coated samples. The results were analyzed with related software. An analysis of the mean of signal-to-noise (S/N) ratio indicated that the corrosion resistance of pulsed plasma electrolytic carburized Ti-48Al-2Cr-2Nb (at%) alloy was influenced significantly by the levels in the Taguchi orthogonal array. The optimized coating parameters for corrosion resistance are 1200 g/l for glycerol concentration, 360 mS/cm for electrical conductivity of electrolyte, 400 V for applied voltage, 30 min for treatment time. The percentage of contribution for each factor was determined by the analysis of variance (ANOVA). The results showed that the applied voltage is the most significant factor affecting the corrosion resistance of the coatings.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Metal and Thin Film Mechanics · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. Morais · Acta Biomaterial. · 2007 · 3 · 33110.1016/j.actbio.2006.10.010 ↗
2. López · Electrochim. Acta · 2002 · 47 · 135910.1016/S0013-4686(01)00860-X ↗
3. Vardiman · J. Appl. Phys. · 1982 · 53 · 69010.1063/1.329977 ↗
4. Hongbing · Wear · 2000 · 246 · 4010.1016/S0043-1648(00)00444-0 ↗
5. Rie · Mater. Sci. Eng. · 1985 · 69 · 47310.1016/0025-5416(85)90349-0 ↗
6. Yerokhin · Surf. Coat. Tech. · 1999 · 122 · 7310.1016/S0257-8972(99)00441-7 ↗
7. Tarakci · Surf. Coat. Tech. · 2005 · 199 · 20510.1016/j.surfcoat.2005.02.117 ↗
8. Ross · 1988
9. Phadke · 1989
10. Khaselev · Corros. Sci. · 2001 · 43 · 129510.1016/S0010-938X(00)00116-5 ↗
11. Hsiao · Surf. Coat. Tech. · 2005 · 190 · 29910.1016/j.surfcoat.2004.03.010 ↗
12. M. Aliofkhazraei, A.R. Sabour, Iran. Patent No. 36697 (2003).
13. Taheri · Plasma Processes Polymers · 2007 · 4 · S72110.1002/ppap.200731805 ↗
14. M. Aliofkhazraei, P. Taheri, A.R. Sabour, Ch. Dehghanian, Mater. Sci. (3) (2007), in press.
15. Fontana · 1996
16. M. Aliofkhazraee, A. Sabour Rouhaghdam, T. Shahrabi, J. Alloy. Compd., in press.
17. Aliofkhazraei · J. Mater. Sci. Technol. · 2007 · 23 · 665
18. Ma · Thi. Sol. Fil. · 2004 · 469–470 · 47210.1016/j.tsf.2004.06.168 ↗