Stable nitride precipitation in additively manufactured nickel superalloys
Source abstract
Abstract
With negligible quantities of nitrogen, wrought and welded solid solution strengthened nickel superalloys usually contain carbides and topologically close-packed phases, such as Laves phase. However, appreciable nitrogen levels on the order of 0.1 % mass fraction drove the precipitation of a range of unanticipated nitride phases in additively manufactured Inconel 625 in the as-deposited and post process hot isostatically pressed conditions. Different nitride phases were observed with small changes in alloy chemistry. Cubic metal nitrides (MN), tetragonal Z-phase (CrNbN), and diamond-cubic metal η-nitrides (M 6 N) were found within the γ matrix of Inconel 625 containing relatively low Fe (1 %), low Ti (0.02 %), and high Si (0.39 %) mass fractions. Conversely, these phases were replaced by only MN nitrides in a similar Inconel 625 alloy with elevated mass fractions of Ti (0.21 %) and Fe (4 %). These various phases, however, were not fully predicted using state-of-the-art computational thermodynamic tools and databases, indicating a sparsity of data for nickel superalloys. Even after hot isostatic pressing, many nitrides persisted and only experienced slight changes in composition and lattice parameters in both materials. The stability of these nitride phases presents a potential pathway for achieving enhanced high temperature and creep properties within this and similar alloy systems.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Metal and Thin Film Mechanics · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Additive manufacturing of metallic components – process, structure and properties10.1016/j.pmatsci.2017.10.001 ↗
2. The metallurgy of alloy 62510.7449/1994/Superalloys_1994_13_37 ↗
3. Solidification of an alloy 625 weld overlay10.1007/BF02595452 ↗
4. Solidification of Nb-bearing superalloys: Part II. Pseudoternary solidification surfaces10.1007/s11661-998-0320-x ↗
5. A melting and solidification study of alloy 62510.1007/BF02645056 ↗
6. New insight on the solidification path of an alloy 625 weld overlay10.1016/j.jmrt.2013.02.008 ↗
7. DuPont · 2011
8. The metallurgy and processing science of metal additive manufacturing10.1080/09506608.2015.1116649 ↗
9. Effect of heat treatment on the microstructural evolution of a nickel-based superalloy additive-manufactured by laser powder bed fusion10.1016/j.actamat.2018.03.017 ↗
10. The influence of annealing temperature and time on the formation of δ-phase in additively-manufactured Inconel 62510.1007/s11661-018-4643-y ↗
11. Precipitation and dissolution of δ and γ″ during heat treatment of a laser powder-bed fusion produced Ni-based superalloy10.1016/j.scriptamat.2018.05.025 ↗
12. Impact of iron composition on the properties of an additively manufactured solid solution strengthened nickel base alloy10.1016/j.msea.2018.01.112 ↗
13. Impact of chemical composition on precipitate morphology in an additively manufactured nickel base superalloy10.1016/j.jallcom.2019.05.230 ↗
14. Microstructural architecture, microstructures, and mechanical properties for a nickel-base superalloy fabricated by electron beam melting10.1007/s11661-011-0748-2 ↗
15. The microstructure and mechanical properties of deposited-IN625 by laser additive manufacturing10.1108/RPJ-05-2016-0081 ↗
16. Effect of Ti addition on cracking and microhardness of Inconel 625 during the laser solid forming processing10.1016/j.jallcom.2017.03.355 ↗
17. Effect of solution heat treatment on the microstructure and mechanical properties of Inconel 625 superalloy fabricated by laser solid forming10.1016/j.jallcom.2018.07.087 ↗
18. Characterization and comparison of Inconel 625 processed by selective laser melting and laser metal deposition10.1002/adem.201600635 ↗
19. Effect of heat treatments on microstructure evolution and grain morphology of alloy 625 with 0.4 wt% boron modification fabricated by laser wire deposition10.1016/j.jallcom.2018.06.106 ↗
20. Effect of location on microstructure and mechanical properties of additive layer manufactured Inconel 625 using gas tungsten arc welding10.1016/j.msea.2016.09.015 ↗
21. The effect of post-weld heat treatment temperature on the microstructure of Inconel 625 deposited metal10.1016/j.jallcom.2013.12.224 ↗
22. Microstructural evolution and mechanical properties of Inconel 625 alloy during pulsed plasma arc deposition process10.1016/j.jmst.2013.02.010 ↗
23. Precipitates in additively manufactured Inconel 625 superalloy10.3390/ma12071144 ↗
24. Microstructure evolution characteristics of Inconel 625 alloy from selective laser melting to heat treatment10.1016/j.msea.2017.08.058 ↗
25. Microstructure characteristics of Inconel 625 superalloy manufactured by selective laser melting10.1016/j.jmst.2014.09.020 ↗
26. Laser metal deposition of Inconel 625: microstructure and mechanical properties10.2351/1.4757717 ↗
27. Application of finite element, phase-field, and CALPHAD-based methods to additive manufacturing of Ni-based superalloys10.1016/j.actamat.2017.05.003 ↗
28. Microstructural development in As built and heat treated IN625 component additively manufactured by laser powder bed fusion10.1007/s11669-020-00855-9 ↗
29. Formation of the Ni3Nb δ-phase in stress-relieved Inconel 625 produced via laser powder-bed fusion additive manufacturing10.1007/s11661-017-4304-6 ↗
30. Lippold · 2011
31. Role of geometry on properties of additively manufactured Ti-6Al-4V structures fabricated using laser based directed energy deposition10.1016/j.matdes.2016.05.045 ↗
32. Thermo-Calc & DICTRA, computational tools for materials science10.1016/S0364-5916(02)00037-8 ↗
33. Thermo-Calc Software TCNI8 Ni-alloys database. (Accessed 29 October 2021).
34. Bemerkungen zur schichtkristallbildung
35. Influence of solidification structure on austenite to martensite transformation in additively manufactured hot-work tool steels10.1016/j.actamat.2021.117044 ↗
36. I. Levin, NIST Inorganic Crystal Structure Database (ICSD), in, National Institute of Standards and Technology, 2018.
37. Giannuzzi · 2004
38. The quantitative analysis of thin specimens10.1111/j.1365-2818.1975.tb03895.x ↗
39. S. Kou, Welding metallurgy, New Jersey, USA, 431 (2003) 223-225.10.1002/0471434027 ↗
40. Microsegregation in Al–4.5Cu wt% alloy: experimental investigation and numerical modeling10.1016/S0921-5093(00)01825-6 ↗
41. Investigation on the precipitates of IN718 alloy fabricated by selective laser melting10.3390/met9101128 ↗
42. Precipitation in a nitrogen-alloyed stainless steel at 850 °C10.1016/0956-716X(93)90489-F ↗
43. Precipitation in creep resistant austenitic stainless steels10.1179/026708301101508972 ↗
44. Precipitation of z-phase in a high-nitrogen stainless steel10.1007/BF02835491 ↗
45. The evolution of oxygen-based inclusions in an additively manufactured super-duplex stainless steel10.1007/s11661-021-06311-8 ↗
46. Homogenization kinetics of a nickel-based superalloy produced by powder bed fusion laser sintering10.1016/j.scriptamat.2016.12.037 ↗