journal article·2022-07

Directional-dependent precipitate microstructure and mechanical properties of tensile and compressive stress-assisted aged Mg-Zn alloys

Liping Zhong, Chang Chen, Yongjian Wang, Yuchen Dou

Publisher page

Abstract

Aging aided by external elastic stress is of scientific interest and practical importance in improving the precipitation hardening response of magnesium alloys. In this work, fiber textured Mg-6 wt.% Zn alloys were subjected to tensile and compressive stress-assisted aging (TSA and CSA, respectively), in which stress is applied along the extrusion direction. Results reveal that the precipitate microstructure, including shape, size, distribution and even internal defect structures exhibits a stress directional dependence. Aberration-corrected scanning transmission electron microscopy shows that a high number density of Zn solute clusters is produced upon CSA, and relatively fine β 1 ’ precipitates are predominantly formed under TSA. First-principles calculations indicate that the stress direction-dependent solute diffusion ability is the leading cause of such directional-dependent precipitate characteristics. Furthermore, TSA generates a higher yield strength than that of stress-free aging (SFA), owing to the relatively high density of fine β 1 ’ precipitates. Compared with SFA and TSA alloys, the CSA alloy contains massive Zn solute clusters and has higher yield strength and better ductility due to the strong cluster-dislocation interactions without the generation of local high stress concentration at the coherent interface. This work offers further insights into altering the precipitation behavior of Mg alloys by applying external stress field and provides possible solutions to achieve high strength-ductility synergy in Mg alloys.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Latest research advances on magnesium and magnesium alloys worldwide10.1016/j.jma.2020.02.003 ↗
2. Ultrastrong and ductile soft magnetic high-entropy alloys via coherent ordered nanoprecipitates10.1002/adma.202102139 ↗
3. Simultaneous enhancement of strength and ductility by aging treatment in fine-grained Mg-13Gd alloy10.1016/j.msea.2021.141441 ↗
4. Enhanced age-hardening response and mechanical properties of the Mg-Gd-Y-Zn-Zr alloy by trace Ag addition10.1016/j.jallcom.2021.159825 ↗
5. Effects of minor Nd and Er additions on the precipitation evolution and dynamic recrystallization behavior of Mg–6.0Zn–0.5Mn alloy10.1016/j.jma.2020.06.018 ↗
6. Development of high strength and formability Mg-6Zn-0.2Ca alloy via multi-pass warm rolling and aging treatment10.1016/j.msea.2021.141452 ↗
7. Effect of double aging on mechanical properties and microstructure of EV31A alloy10.1016/S1003-6326(21)65679-0 ↗
8. Zn segregation in interface between Mg17Al12 precipitate and Mg matrix in Mg–Al–Zn alloys10.1016/j.scriptamat.2019.01.001 ↗
9. Interphase boundary segregation of silver and enhanced precipitation of Mg17Al12 phase in a Mg-Al-Sn-Ag alloy10.1016/j.scriptamat.2018.05.047 ↗
10. Effects of Mn addition on the microstructure and mechanical properties of Mg–Zn–Sn alloys10.1016/j.msea.2020.138933 ↗
11. Ultrastrong steel via minimal lattice misfit and high-density nanoprecipitation10.1038/nature22032 ↗
12. Size effect in the Al3Sc dispersoid-mediated precipitation and mechanical/electrical properties of Al-Mg-Si-Sc alloys10.1016/j.jmst.2020.03.056 ↗
13. Nanoprecipitate-strengthened high-entropy alloys
14. Solute cluster evolution during deformation and high strain hardening capability in naturally aged Al–Zn–Mg alloy10.1016/j.actamat.2021.116682 ↗
15. Synergization of ductility and yield strength in a dilute quaternary Mg-Zn-Gd-Ca alloy through texture modification and Guinier–Preston zone10.1016/j.scriptamat.2021.114257 ↗
16. Clustering behavior during natural aging and artificial aging in Al-Mg-Si alloys with different Ag and Cu addition10.1016/j.msea.2018.07.018 ↗
17. Strain hardening mediated by coherent nanoprecipitates in ultrahigh-strength steels10.1016/j.actamat.2021.116984 ↗
18. Effect of stress-aging treatment on the mechanical and corrosion properties of Al−Zn−Mg−Cu alloy10.1016/j.msea.2022.142791 ↗
19. On the stress-temperature dependences in TiNi-based shape memory alloys10.1016/j.jallcom.2022.164227 ↗
20. Enhanced age hardening response and precipitation evolution of elastic stress aged Mg–Zn alloys10.1016/j.jallcom.2020.158513 ↗
21. Stress aging of Al–Cu–Mg–Ag single crystal: The effect of the loading orientations10.1016/j.jallcom.2019.152635 ↗
22. Nano-twin-induced exceptionally superior cryogenic mechanical properties of a Ni-based GH3536 (Hastelloy X) superalloy
23. Revealing grain structure development and texture evolution during elastic stress-assist aging of Mg–Zn alloys10.1016/j.jallcom.2021.160474 ↗
24. Improved mechanical properties and strengthening mechanism with the altered precipitate orientation in magnesium alloys
25. Ultra-high strength Mg-Li alloy with B2 particles and spinodal decomposition zones, Fundamental
26. Improved strength in wrought Mg–Y–Ni alloys by adjusting the block-shaped LPSO phase and plate-shaped γ′ phase10.1016/j.msea.2021.142198 ↗
27. Effect of grain size, texture and density of precipitates on the hardness and tensile yield stress of Mg-14Gd-0.5Zr alloys10.1016/j.matdes.2016.10.074 ↗
28. The mechanism for the different effects of texture on yield strength and hardness of Mg alloys10.1038/s41598-017-08966-z ↗
29. Achieving high strength and ductility in ODS-W alloy by employing oxide@W core-shell nanopowder as precursor10.1038/s41467-021-25283-2 ↗
30. Solute clusters and GP zones in binary Mg–RE alloys10.1016/j.actamat.2015.12.047 ↗
31. The role of Ag, Ca, Zr and Al in strengthening effects of ZK series alloys by altering G.P. zones stability10.1016/j.actamat.2018.01.010 ↗
32. Solute clusters-promoted strength-ductility synergy in Al-Sc alloy10.1016/j.jmst.2021.02.075 ↗
33. Self-accommodated defect structures modifying the growth of Laves phase10.1016/j.jmst.2020.05.042 ↗
34. Laves phases: a review of their functional and structural applications and an improved fundamental understanding of stability and properties10.1007/s10853-020-05509-2 ↗
35. Structural characterization of Laves-phase MgZn2 precipitated in Mg-Zn-Y alloy10.1007/s12540-010-0403-2 ↗
36. Significant improvement in yield stress of Mg-Gd-Mn alloy by forming bimodal grain structure10.1016/j.msea.2020.140569 ↗
37. Nano-precipitates made of atomic pillars revealed by single atom detection in a Mg-Nd alloy10.1063/1.3701272 ↗
38. Reduced temperature (22–100°C) ageing of an Mg–Zn alloy10.1016/j.msea.2008.02.038 ↗
39. Precipitation and hardening in magnesium alloys10.1007/s11661-012-1217-2 ↗
40. First-principles study of solute–vacancy binding in magnesium10.1016/j.actamat.2009.09.031 ↗
41. Diffusion coefficients of alloying elements in dilute Mg alloys: A comprehensive first-principles study10.1016/j.actamat.2015.10.010 ↗
42. Thermodynamic modeling and diffusion kinetic experiments of binary Mg–Gd and Mg–Y systems10.1016/j.actamat.2014.02.029 ↗
43. Twin-boundary segregation energies and solute-diffusion activation enthalpies in Mg-based binary systems: A first-principles study10.1016/j.scriptamat.2014.02.004 ↗
44. Coarsening of γ′ in Ni–Al alloys aged under uniaxial compression: I. Early-stage kinetics10.1016/S1359-6454(03)00329-X ↗
45. Coarsening of γ′ in Ni–Al alloys aged under uniaxial compression: II. Diffusion under stress and retardation of coarsening kinetics10.1016/S1359-6454(03)00327-6 ↗
46. Nanoprecipitate-hardened 1.5GPa steels with unexpected high ductility10.1016/j.scriptamat.2009.02.062 ↗
47. Realizing strength-ductility combination of coarse-grained Al0.2Co1.5CrFeNi1.5Ti0.3 alloy via nano-sized, coherent precipitates10.1016/j.ijplas.2017.10.005 ↗
48. Precipitate characteristics and their effect on the prismatic-slip-dominated deformation behaviour of an Mg–6 Zn alloy10.1016/j.actamat.2013.03.033 ↗
49. Cluster hardening in Al-3Mg triggered by small Cu additions10.1016/j.actamat.2018.08.050 ↗
50. Synchronous improvement of mechanical properties and stress corrosion resistance by stress-aging coupled with natural aging pre-treatment in an Al-Zn-Mg alloy with high recrystallization fraction