journal article·2022-07

Study on microstructure evolution and aging precipitation behavior of a novel Al-Li alloy fabricated by laser rapid melting

Zeyu Sun, Bei He, Kangjie Li, Yuxuan Tu, Huaming Wang

Publisher page

Abstract

For Sc-containing Al-Li alloys, Al 3 Sc precipitates exhibited inhomogeneous distribution due to limited solid solubility, segregation and sluggish diffusion of Sc. Laser rapid melting (LRM) with its merit of increasing the solubility of alloying elements during solidification represents a pivotal technique for exploring new alloy compositions. In this study, microstructure evolution and aging precipitation behavior of a novel Al-Li-Cu-Mg-Ag-Sc alloy fabricated by LRM were investigated during a systematically optimized T6 heat treatment. No primary Al 3 Sc particles were formed during the rapid solidification, but coherent Al 3 Sc nanoparticles were precipitated in the subsequent cooling process. Maximum hardness of 202 HV was achieved after aging at 175 °C/18 h due to combined precipitation strengthening of the Al 3Sc, δ`, Al 3(Li, Sc) and T 1 phases. Coherent Al 3Sc was concerned with a sequence of atomic displacement modulations that led to varying degrees of {002} Al planar collapse, while interfacial dislocations were emitted from the interface of Al 3 Sc with coherency lost. The existing Al 3 Sc phases were available to be acted as nucleation sites for δ′ and T 1 to form composite phases. These results can provide indispensable information for compositional design of novel Al-Li alloy specifically for laser additive manufacturing.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Additive Manufacturing Materials and Processes · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. The evolution of Al-Li base products for aerospace and space applications10.1007/s11661-012-1155-z ↗
2. Recent developments in advanced aircraft aluminium alloys10.1016/j.matdes.2013.12.002 ↗
3. Atomic structure of T1 precipitates in Al-Li-Cu alloys revisited with HAADF-STEM imaging and small-angle X-ray scattering10.1016/j.actamat.2010.09.044 ↗
4. Geuser, influence of Mg and Li content on the microstructure evolution of Al-Cu-Li alloys during long-term ageing10.1016/j.actamat.2016.09.036 ↗
5. Formation mechanism of precipitate T1 in AlCuLi alloys10.1016/j.jallcom.2014.10.208 ↗
6. Transmission electron microscopy study of the evolution of precipitates in aged Al-Li-Cu alloys: the θ′ and T1 phases10.1016/S1359-6454(03)00253-2 ↗
7. Investigation on formation mechanism of T1 precipitate in an Al-Cu-Li alloy10.1016/j.jallcom.2017.06.198 ↗
8. Quantification and modelling of the microstructure/strength relationship by tailoring the morphological parameters of the T1 phase in an Al-Cu-Li alloy10.1016/j.actamat.2014.04.046 ↗
9. Influence of Mg, Ag and Zn minor solute additions on the precipitation kinetics and strengthening of an Al-Cu-Li alloy10.1016/j.actamat.2017.05.029 ↗
10. Role of Ag and Mg on precipitation of T1 phase in an Al-Cu-Li-Mg-Ag alloy10.1016/S1359-6462(00)00651-5 ↗
11. Independent and combined roles of trace Mg and Ag additions in properties precipitation process and precipitation kinetics of Al-Cu-Li- (Mg)-(Ag)-Zr-Ti alloys10.1016/S1359-6454(98)00079-2 ↗
12. Aluminium-lithium alloys10.1007/BF01132370 ↗
13. Precipitation strengthening at ambient and elevated temperatures of heat-treatable Al (Sc) alloys10.1016/S1359-6454(02)00201-X ↗
14. Effects of homogenization treatment on recrystallization behavior and dispersoid distribution in an Al-Zn-Mg-Sc-Zr alloy10.1016/j.jallcom.2007.02.054 ↗
15. Precipitation evolution in Al-0.1Sc, Al-0.1Zr and Al-0.1Sc-0.1Zr (at%) alloys during isochronal aging10.1016/j.actamat.2010.05.054 ↗
16. Hardening behavior of Al-0.25Sc and Al-0.25Sc-0.12Zr alloys during isothermal annealing10.1016/j.jallcom.2019.152922 ↗
17. Influence of SLM scanspeed on microstructure, precipitation of Al3Sc particles and mechanical properties in Sc- and Zr-modified Al-Mg alloys10.1016/j.matdes.2017.11.053 ↗
18. Influence of Sc content on the microstructure and mechanical properties of cast Al-2Li-2Cu-0.5Mg-0.2Zr alloy10.1016/j.matchar.2018.05.046 ↗
19. Monodisperse Al3(LiScZr) core/shell precipitates in Al alloys10.1016/j.scriptamat.2007.11.012 ↗
20. Highly monodisperse core-shell particles created by solid-state reactions10.1038/nmat3077 ↗
21. Rapid solidification of M2 high-speed steel by laser melting10.1016/j.matdes.2008.05.030 ↗
22. Control of thermally stable core-shell nano-precipitates in additively manufactured Al-Sc-Zr alloys
23. Shear band mediated ω phase transformation in Nb single crystals deformed at 77 K10.1080/21663831.2021.1992523 ↗
24. Atomic-scale study on the precipitation behavior of an Al-Zn-Mg-Cu alloy during isochronal aging10.1016/j.jmst.2021.08.039 ↗
25. Precipitation characteristics and morphological transitions of Al3Sc precipitates10.1016/j.jallcom.2019.03.256 ↗
26. Effect of Sc addition on the microstructure and mechanical properties of cast Al-3Li-1.5Cu-0.15Zr alloy10.1016/j.msea.2016.10.063 ↗
27. An insight into the precipitate evolution and mechanical properties of a novel high-performance cast Al-Li-Cu-Mg-X alloy10.1016/j.jallcom.2021.159996 ↗
28. Microstructure transformation and grain refinement during non-equilibrium solidification of a highly undercooled alloy system10.1016/j.jallcom.2021.158821 ↗
29. Development of a recovered/recrystallized multilayered microstructure in Al alloys by accumulative roll bonding10.1016/j.actamat.2007.06.021 ↗
30. A high-strength, ductile Al-0.35Sc-0.2Zr alloy with good electrical conductivity strengthened by coherent nanosized-precipitates10.1016/j.jmst.2017.01.017 ↗
31. Mechanical properties and electrical conductivity of cold rolled Al-7.5wt%Y alloy with heterogeneous lamella structure and stacking faults10.1016/j.jallcom.2021.160692 ↗
32. Pseudoelasticity, shape memory effect and FCC→ HCP martensitic transformation associated with stacking faults in FCC alloys10.1016/1359-6462(96)00283-7 ↗
33. Systematic study of stacking fault energies of random Al-based alloys10.1016/S1359-6454(97)00432-1 ↗
34. Optimizing the tensile properties of Al-Si-Cu-Mg 319-type alloys: Role of solution heat treatment10.1016/j.matdes.2014.01.060 ↗
35. New short T6 heat treatments for aluminium silicon alloys obtained by semisolid forming10.1016/j.msea.2014.10.078 ↗
36. Effect of electropulse on solid solution treatment of 6061 aluminum alloy10.1016/j.jallcom.2014.07.062 ↗
37. Precipitation behavior of an Al-Cu-Li-X alloy and competing relationships among precipitates at different aging temperatures10.1016/j.msea.2021.141125 ↗
38. The nanoscale strain assignment behavior of icosahedral quasicrystalline phase T2-Al6CuLi3 in cast Al-Li alloys10.1016/j.jallcom.2021.159096 ↗
39. The evolution of microstructure and mechanical properties at elevated temperature of cast Al-Li-Cu-Mg alloys with Ni addition10.1016/j.jmrt.2020.07.098 ↗
40. Addressing the strength-ductility trade-off in a cast Al-Li-Cu alloy-Synergistic effect of Sc-alloying and optimized artificial ageing scheme10.1016/j.jmst.2021.01.036 ↗
41. Nanoscale structural evolution of Al3Sc precipitates in Al(Sc) alloys10.1016/S1359-6454(01)00116-1 ↗
42. Loss in coherency and coarsening behavior of Al3Sc precipitates10.1016/j.actamat.2003.09.042 ↗
43. Microstructural control of toughness in aluminium-lithium alloys10.1016/0001-6160(85)90095-1 ↗
44. Nucleation on dislocations10.1016/0001-6160(57)90021-4 ↗
45. The role of plastic deformation on the competitive microstructural evolution and mechanical properties of a novel Al-Li-Cu-X alloy10.1016/S1471-5317(00)00002-X ↗
46. Effects of Ag on the age hardening response and intergranular corrosion resistance of Al-Mg alloys10.1016/j.matchar.2018.10.025 ↗