journal article·2022-07Open access

Enhanced cryogenic and ambient temperature mechanical properties of CoCuFeMnNi high entropy alloy through controlled heat treatment

J. Fiocchi, A. Mostaed, M. Coduri, A. Tuissi, R. Casati

Abstract

Dedicated thermal treatments can improve the mechanical behaviour of high entropy alloys (HEAs) by producing nanostructured microstructures with improved characteristics. Herein, the inherent metastability of an equiatomic CoCuFeMnNi alloy was exploited to induce the formation of secondary phases upon ageing treatment. Advanced characterization techniques, namely high resolution synchrotron X-ray diffraction and aberration corrected scanning transmission electron microscopy, allowed to describe the decomposition of the supersaturated solid solution. Nanometric rounded Cu-rich clusters in the solution-treated alloy and coherent, regularly oriented Cu-rich discs in the peak-aged condition were possibly produced by spinodal decomposition. An almost 100% enhancement of mechanical strength was obtained thanks to the modulation of composition. Moreover, mechanical behaviour at cryogenic temperature was improved by ageing, both in terms of strength and ductility. Plastic deformation took place by dislocation slip, regardless of the testing temperature.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. High-entropy alloys10.1038/s41578-019-0121-4 ↗
2. Mechanism of grain refinement in an equiatomic medium-entropy alloy CrCoNi during hot deformation10.1016/j.jallcom.2019.152382 ↗
3. Dual mechanisms of grain refinement in a FeCoCrNi highentropy alloy processed by highpressure torsion
4. Enhancing strength and strain hardenability via deformation twinning in fcc-based high entropy alloys reinforced with intermetallic compounds10.1016/j.actamat.2018.12.010 ↗
5. Ab initio assisted design of quinary dual-phase high-entropy alloys with transformation-induced plasticity10.1016/j.actamat.2017.07.023 ↗
6. Extremely high strength and work hardening ability in a metastable high entropy alloy10.1038/s41598-018-28383-0 ↗
7. Novel NiAl-strengthened high entropy alloys with balanced tensile strength and ductility10.1016/j.msea.2018.11.055 ↗
8. Multicomponent high-entropy Cantor alloys
9. In the quest of single phase multi-component multiprincipal high entropy alloys10.1016/j.jallcom.2016.11.383 ↗
10. Deciphering micro-mechanisms of plastic deformation in a novel single phase fcc-based MnFeCoNiCu high entropy alloy using crystallographic texture10.1016/j.msea.2016.01.065 ↗
11. Establishing processing-microstructure-property paradigm in complex concentrated equiatomic CoCuFeMnNi alloy10.1016/j.msea.2019.04.096 ↗
12. Phase equilibria in equiatomic CoCuFeMnNi high entropy alloy10.1016/j.matchemphys.2017.08.051 ↗
13. Influence of phase decomposition on mechanical behavior of an equiatomic CoCuFeMnNi high entropy alloy10.1016/j.actamat.2019.09.030 ↗
14. Nanoscale modulated structures by balanced distribution of atoms and mechanical/structural stabilities in CoCuFeMnNi high entropy alloys10.1016/j.msea.2019.138120 ↗
15. Polmear · 1995
16. Phase transformations in maraging steels10.1533/9780857096111.2.332 ↗
17. The role of alloying elements in the design of nickel-base superalloys10.1007/BF00549796 ↗
18. Bifunctional nanoprecipitates strengthen and ductilize a medium-entropy alloy10.1038/s41586-021-03607-y ↗
19. Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys10.1126/science.aas8815 ↗
20. Laser weldability of cast and rolled high-entropy alloys for cryogenic applications10.1016/j.msea.2018.11.009 ↗
21. Outstanding tensile properties of a precipitation-strengthened FeCoNiCrTi0.2 high-entropy alloy at room and cryogenic temperatures10.1016/j.actamat.2018.11.049 ↗
22. Combining a nine-crystal multi-analyser stage with a two-dimensional detector for high-resolution powder X-ray diffraction10.1107/S1600576718014589 ↗
23. Understanding the deformation behavior of CoCuFeMnNi high entropy alloy by investigating mechanical properties of binary ternary and quaternary alloy subsets10.1016/j.matdes.2018.07.046 ↗
24. Deformation and annealing behaviors of high-entropy alloy Al0.5CoCrCuFeNi10.1016/j.jallcom.2009.06.182 ↗
25. Microstructure characterizations and strengthening mechanism of multi-principal component AlCoCrFeNiTi0.5 solid solution alloy with excellent mechanical properties10.1016/j.matlet.2008.01.011 ↗
26. Microstructural characterization and corrosion behaviour of AlCoCrFeNiTi x high-entropy alloy coatings fabricated by laser cladding10.1016/j.surfcoat.2019.01.044 ↗
27. Equilibrium phase of high-entropy FeCoNiCrCu0.5 alloy at elevated temperature10.1016/j.jallcom.2009.09.041 ↗
28. Coupling computational thermodynamics with density-function-theory based calculations to design L12 precipitates in Fe-Ni based alloys10.1016/j.matdes.2020.108592 ↗
29. Campbell · 2008
30. Novel application of anomalous small-Angle X-ray scattering to characterize inhomogeneities in materials10.1515/HTMP.1992.10.3.159 ↗
31. Concurrence of spinodal decomposition and nano-phase precipitation in a multi-component AlCoCrCuFeNi high-entropy alloy10.1016/j.jmrt.2018.04.020 ↗
32. Thermodynamics of alloys and phase equilibria in the copper-iron system10.1361/105497103770330280 ↗
33. Mechanical alloying in the Fe-Cu system10.1016/S0921-5093(97)00522-4 ↗
34. On spinodal decomposition
35. Effect of dislocations on spinodal decomposition in Fe-Cr alloys10.1016/j.jnucmat.2009.10.042 ↗
36. Phase transformation of the L12 phase to kappa-carbide after spinodal decomposition and ordering in an Fe-C-Mn-Al austenitic steel10.1016/j.msea.2015.06.096 ↗
37. γ Decomposition in Fe–Mn–Al–C lightweight steels10.1016/j.jmrt.2020.02.088 ↗
38. Influence of W, Mo and Ti trace elements on the phase separation in Al8Co17Cr17Cu8Fe17Ni33 based high entropy alloy10.1016/j.ultramic.2015.06.009 ↗
39. Spinodal decomposition during aging of Fe-Ni-C martensites10.1007/BF02670166 ↗
40. Ordering transformation and spinodal decomposition in Au-Ni alloys
41. Metastability in high-entropy alloys: a review10.1557/jmr.2018.306 ↗
42. Morphology, structure and composition of precipitates in Al 0.3CoCrCu 0.5FeNi high-entropy alloy10.1016/j.intermet.2012.07.036 ↗
43. Microstructure characterization of AlxCoCrCuFeNi high-entropy alloy system with multiprincipal elements10.1007/s11661-005-0283-0 ↗
44. Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element10.2320/matertrans.46.2817 ↗
45. Hardening by spinodal modulated structure10.1016/0001-6160(80)90163-7 ↗
46. Spinodal decomposition and mechanical properties of an austenitic Fe-30wt%Mn-9wt%Al-0.9wt%C alloy10.1016/0921-5093(89)90196-2 ↗
47. Spinodal decomposition and dislocation lines in thin films and bulk materials10.1103/PhysRevB.58.8277 ↗
48. A study on slip activation for a coarse-grained and single crystalline CoCrNi medium entropy alloy10.1016/j.intermet.2019.106682 ↗
49. High manganese austenitic twinning induced plasticity steels: A review of the microstructure properties relationships10.1016/j.cossms.2011.04.002 ↗
50. A fracture-resistant high-entropy alloy for cryogenic applications10.1126/science.1254581 ↗