journal article·2022-06

Microstructure evolution and phase transformation behavior of Ti17 and γ-TiAl bimetallic structure fabricated by directed energy deposition

Shuxin Shen, Huaming Wang, Bei He, Shuquan Zhang

Publisher page

Abstract

A bimetallic structure prepared by directed energy deposition (DED) can simultaneously meet multiple property demands in service. However, in existing studies, formation mechanism and controlling method of transition zone (TZ) remain elusive due to narrow TZ in Functionally graded Materials (FGMs). In this article, a bimetallic structure of Ti17 and γ-TiAl alloy with a wide transition zone prepared by DED was obtained with special powder feeding method, and microstructure of TZ was studied in more details. According to change of element content and microstructure, the wide transition zone (TZ) is distinguished as TZ 1 and TZ 2. With the increase of Al content from TZ 1 to TZ 2, α phase grows up and (α 2+γ) lamellar precipitates according to a certain burgers orientation relation. Meanwhile, massive γ phase nucleates at α grain boundary, and β phase transforms into ordered phase B2. Microhardness of TZ 1 is much higher than that of Ti17 because the effect of solid-solution strengthening. The microhardness of TZ 2 is reduced by precipitation of softer phases (α 2+γ) lamellar and massive γ. In TiAl, the increase of Al content leads to coarsening of (α 2+γ) lamellar and massive γ, so microhardness declines. The sequence of phase transitions in different zones is simulated and the results are consistent with the observed microstructure. Due to low strength microstructure with coarsening α phase and fine (α 2+γ) lamellar , the average tensile strength of gradient sample at room temperature is only 167 MPa, and fracture shows typical cleavage fracture characteristic.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Titanium Alloys Microstructure and Properties · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. Aerospace materials
2. On the feasibility of BLISK produced by linear friction welding
3. Processing techniques for functionally graded materials10.1016/S0921-5093(03)00578-1 ↗
4. Additive manufacturing of functionally graded materials: a review10.1016/j.msea.2019.138209 ↗
5. Additive manufacturing of functionally graded metallic materials using laser metal deposition
6. A review on functionally gradient materials (FGMs) and their applications
7. Y. Watanabe, H. Sato, Review Fabrication of Functionally Graded Materials under a Centrifugal Force, Nanocomposites with Unique Properties and Applications in Medicine and Industry, 2011.10.5772/20988 ↗
8. Functionally graded materials synthesis via low vacuum directed vapor deposition10.1016/S1359-8368(96)00023-6 ↗
9. G.E. Knoppers, J.W. Gunnink, J.V.D. Hout, W.P.V. Vliet, The reality of functionally graded material products, in: Solid Freeform Fabrication Symposium Proceedings: Process Development, Modeling, Applications, Materials, 2004.
10. Functionally graded composite materials: an overview10.1016/j.mspro.2014.07.442 ↗
11. Fabrication of ZrO2 –NiCr functionally graded material by powder metallurgy
12. Hydroxyapatite–Ti functionally graded biomaterial fabricated by powder metallurgy
13. T. Kunimine, H. Sato, E. Miura-Fujiwara, Y. Watanabe, New processing routes for functionally graded materials and structures through combinations of powder metallurgy and casting, in: Advances in Functionally Graded Materials and Structures, 2016.10.5772/62393 ↗
14. Additive manufacturing of metals10.1016/j.actamat.2016.07.019 ↗
15. Additive manufacturing of metals: a brief review of the characteristic microstructures and properties of steels, Ti-6Al-4V and high-entropy alloys10.1080/14686996.2017.1361305 ↗
16. Milewski · 2017
17. M.J. Donachie, Titanium: A Technical Guide, Titanium: A Technical Guide, 2000.10.31399/asm.tb.ttg2.9781627082693 ↗
18. Advances in gamma titanium aluminides and their manufacturing techniques10.1016/j.paerosci.2012.04.001 ↗
19. Design, processing, microstructure, properties, and applications of advanced intermetallic TiAl alloys10.1002/adem.201200231 ↗
20. Characterization of wire arc additively manufactured titanium aluminide functionally graded material: microstructure, mechanical properties and oxidation behaviour10.1016/j.msea.2018.07.097 ↗
21. Introduction of ternary alloying element in wire arc additive manufacturing of titanium aluminide intermetallic
22. Laser additive manufacturing of bimetallic structure from Ti-6Al-4V to Ti-48Al-2Cr-2Nb via vanadium interlayer10.1016/j.matlet.2019.127210 ↗
23. Hybrid manufacturing of γ-TiAl and Ti–6Al–4V bimetal component with enhanced strength using electron beam melting10.1016/j.compositesb.2020.108587 ↗
24. Dilution of Al and V through laser powder deposition enables a continuously compositionally Ti/Ti6Al4V graded structure10.1016/j.jallcom.2018.05.289 ↗
25. Microstructure and mechanical properties of TA15-Ti2AlNb bimetallic structures by laser additive manufacturing10.1016/j.msea.2020.140019 ↗
26. Formation mechanism of dilute region and microstructure evolution in laser solid forming TA15/Ti2AlNb dual alloy10.3390/ma13030552 ↗
27. Additive manufacturing of a functionally graded material from Ti-6Al-4V to Invar: experimental characterization and thermodynamic calculations10.1016/j.actamat.2016.12.070 ↗
28. Additive manufacturing of Inconel 718 – Ti6Al4V bimetallic structures
29. Development and characterization of Ti-6Al-4V to 304L stainless steel gradient components fabricated with laser deposition additive manufacturing10.1016/j.matdes.2016.05.016 ↗
30. Eliminating the crack of laser 3D printed functionally graded material from TA15 to Inconel718 by base preheating10.1016/j.optlastec.2020.106100 ↗
31. Laser additive manufacturing of TA15 - Inconel 718 bimetallic structure via Nb/Cu multi-interlayer10.1016/j.vacuum.2019.108888 ↗
32. Microstructures and mechanical properties of laser melting deposited Ti6Al4V/316L functional gradient materials10.1016/j.msea.2021.141355 ↗
33. Interface microstructure evolution and bonding strength of TC11/γ-TiAl bi-materials fabricated by laser powder deposition10.1007/s12598-014-0243-1 ↗
34. Feathery microstructure formation of Ti48Al2Cr2Nb alloy by rapidly quenched solidification10.1002/crat.201800041 ↗
35. Microstructure and metastable phase in rapidly solidified TiAl alloy prepared by vacuum suction casting10.1002/crat.201900054 ↗
36. Intragranular nucleation sites of massive gamma grains in a TiAl-based alloy10.1016/j.scriptamat.2007.04.015 ↗
37. Crystallography and phase transformation mechanisms in TiAl-based alloys – a synthesis10.1016/j.intermet.2009.05.013 ↗
38. Non-conventional transformation pathways and ultrafine lamellar structures in γ-TiAl alloys10.1016/j.actamat.2020.02.053 ↗
39. High tensile ductility and strength in the Ti-42Al-6V–1Cr alloy10.1016/j.jallcom.2016.12.306 ↗
40. On the varieties of build features during multi-layer laser directed energy deposition
41. Prediction of 3D microstructure and phase distributions of Ti6Al4V built by the directed energy deposition process via combined multi-physics models
42. On the origin of microstructural banding in Ti-6Al4V wire-arc based high deposition rate additive manufacturing10.1016/j.actamat.2018.12.038 ↗
43. Microstructure and mechanical properties of wire and arc additive manufactured Ti-6Al-4V10.1007/s11661-012-1444-6 ↗
44. Grain morphology evolution behavior of titanium alloy components during laser melting deposition additive manufacturing10.1016/j.jallcom.2015.01.256 ↗
45. Microstructure evolution and layer bands of laser melting deposition Ti–6.5Al–3.5Mo–1.5Zr–0.3Si titanium alloy10.1016/j.jallcom.2014.07.161 ↗
46. Characterization of microstructure and mechanical properties of laser melting deposited Ti–6.5Al–3.5Mo–1.5Zr–0.3Si titanium alloy10.1016/j.matdes.2013.11.044 ↗
47. Phase transformation and microstructure evolution of a beta-solidified gamma-TiAl alloy10.1016/j.jallcom.2020.158082 ↗
48. Characterization of microstructures formed during nonequilibrium thermal cycles in a TiAl alloy fabricated by direct metal deposition10.1002/adem.201901444 ↗
49. Microstructure and cellular transition characteristic of Ti-42Al-3Nb-1Mo-0.1B alloy10.1007/s41230-020-0086-3 ↗
50. Laser powder bed fusion of an engineering intermetallic TiAl alloy10.1016/j.matdes.2021.109506 ↗
51. Influence of process conditions on the local solidification and microstructure during laser metal deposition of an intermetallic TiAl alloy (GE4822)10.1007/s11661-021-06139-2 ↗
52. Fabrication of TiAl alloy with no multiple heat-affected bands using continuous direct energy deposition10.1016/j.matlet.2020.128581 ↗
53. Microstructure characteristics and failure mechanisms of Ti-48Al-2Nb-2Cr titanium aluminide intermetallic alloy fabricated by directed energy deposition technique
54. Investigation on solid-state phase transformation in a Ti-47Al-2Cr-2V alloy due to thermal cycling during laser additive manufacturing process10.1016/j.jallcom.2019.05.337 ↗
55. Laser deposition melting of TC4/TiAl functionally graded material10.1016/j.vacuum.2020.109349 ↗
56. The role of grain size and selected microstructural parameters in strengthening fully lamellar TiAl alloys10.1007/s11661-998-0157-3 ↗