journal article·2022-05

Effects of niobium and ultrasonic action coupling on microstructure evolution and mechanical properties of Ti46Al 2.6 C alloy

Lingyan Zhou, Hongze Fang, Ruirun Chen, Xiaokang Yang, Xiang Xue, Yong Zhang, Yanqing Su, Jingjie Guo

Publisher page

Abstract

To refine microstructure, adjust the ratio of γ/α 2 and improve the mechanical properties, Ti46Al 2.6 C- x Nb (at. %) alloys were prepared by arc melting under the action of ultrasound. The phase composition, lamellar colony size, elements distribution, the kinds and distribution of carbides and compressive properties were investigated. Results show that as the Nb content increases, the relative content of α 2 phase and Ti 2AlC phase increases, and the relative content of γ phase decreases. TiC phase completely reacts to form Ti 2AlC phase and its shape changes from coarse long rod to short rod. The microstructure was refined with the addition of Nb under ultrasound treatment. Lamellar colony size decreases from 36.9 to 21.5 µm, lamellar spacing decreases from 1.6 to 0.8 µm, and the length-diameter ratio of Ti 2 AlC decreases from 5.4 to 4.0 when the Nb content increases from 0 to 8.0 at. %. During solidification process, not only the component supercooling and heterogeneous nucleation of Nb are increased, but also the crystal grains are broken and the nucleation barrier is reduced under the action of ultrasound to promote the nucleation. The microstructure is refined and the uniformity of the element distribution is improved. Compressive results show that the strength increases from 2074.1 to 2474.2 MPa and the strain increases from 23.4% to 28.0% when the Nb content increases from 0 to 4 at. %. The refinement of lamellar colony and Ti 2AlC, the ratio of γ/α 2 and solid-solution of Nb are the main reasons for improving compressive properties.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Titanium Alloys Microstructure and Properties · MXene and MAX Phase Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. High Nb-TiAl-based porous composite with hierarchical micro-pore structure for high temperature applications10.1016/j.jallcom.2018.02.081 ↗
2. Chemical composition analysis on industrial scale ingots and castings of TiAl alloys10.1007/s41230-020-0091-6 ↗
3. M. Domankova. Long-term creep behaviour of cast TiAl-Ta alloy10.1016/j.intermet.2018.01.013 ↗
4. Juan. Influence of Nb on Ti diffusion in gamma-TiAl intermetallics studied by mechanical spectroscopy10.1016/j.jallcom.2021.158880 ↗
5. High-temperature rotary-bending fatigue characteristics of a high Nb-containing beta-gamma TiAl alloy10.1016/j.msea.2018.08.021 ↗
6. Advances in gamma-alloy materials processes application technology: successes, dilemmas, and future10.1007/s11837-018-2747-x ↗
7. D. Dong. Microstructure and cellular transition characteristic of Ti-42Al-3Nb-1Mo-0.1B alloy [J]10.1007/s41230-020-0086-3 ↗
8. High strength and ductility of electron beam melted β stabilized γ-TiAl alloy at 800°C10.1016/j.msea.2019.03.114 ↗
9. Elevated temperature performance and creep behavior of Y2O3 reinforced Ti-48Al-6Nb alloy at the brittle-ductile transition temperature10.1016/j.jallcom.2021.159497 ↗
10. Effect of carbon addition and cooling rate on lamellar structure of peritectic TiAl-based alloy [J]10.1016/j.intermet.2020.107007 ↗
11. Variations of microstructure and tensile property of γ-TiAl alloys with 0–0.5 at% C additives10.1016/j.msea.2017.06.019 ↗
12. The effect of boron addition on the high-temperature properties and microstructure evolution of high Nb containing TiAl alloys10.1016/j.msea.2018.07.019 ↗
13. Synthesis of TiAl/Nb composites with concurrently enhanced strength and plasticity by powder metallurgy10.1016/j.msea.2020.139997 ↗
14. Microscale investigation of perovskite-Ti3AlC strengthening and plastic deformation in high niobium containing TiAl alloys10.1016/j.jallcom.2020.157563 ↗
15. Prediction modeling of Type-I hot corrosion performance of Ti-Al-Mo-X (XCr, Mn) alloys in (Na, K)2SO4 molten salt mixture environment at 900 degrees C10.1016/j.jallcom.2020.156010 ↗
16. The high-temperature performance of Ti-46.5Al-xTa (x=0.8, 4 and 8 at%) alloys produced using SPS10.1016/j.matpr.2020.02.395 ↗
17. In-situ observations and acoustic measurements upon fragmentation of free-floating intermetallics under ultrasonic cavitation in water10.1016/j.ultsonch.2021.105820 ↗
18. Microstructure and tensile properties of cast Ti-44Al-4Nb-4Hf-0.1Si-0.1B alloy with refined lamellar microstructures10.1016/j.intermet.2009.03.002 ↗
19. Evaluation of the properties of daughter bubbles generated by inertial cavitation of preformed microbubbles10.1016/j.ultsonch.2020.105400 ↗
20. Improved mechanical properties of near-eutectic Al-Si piston alloy through ultrasonic melt treatment10.1016/j.msea.2016.05.087 ↗
21. Microstructural evolution in ultrasonicated AS41 magnesium alloy10.1016/j.matlet.2011.08.113 ↗
22. The growth restriction effect of TiCN nanoparticles on Al-Cu-Zr alloys via ultrasonic treatment10.1016/j.ultsonch.2021.105829 ↗
23. Effects of high-intensity ultrasound on the microstructures and mechanical properties of ultra-large 2219 Al alloy ingot10.1016/j.msea.2019.138154 ↗
24. Novel casting TiAl alloy with fine microstructure and excellent performance assisted by ultrasonic melt treatment10.1016/j.matlet.2017.04.102 ↗
25. Microstructure modification and mechanical performances enhancement of Ti44Al6Nb1Cr alloy by ultrasound treatment10.1016/j.jallcom.2017.03.293 ↗
26. Interstitial solubility in γ and α2 phases of TiAl-based alloys10.1016/S1359-6454(96)00111-5 ↗
27. Role of graphite on microstructural evolution and mechanical properties of ternary TiAl alloy prepared by arc melting method10.1016/j.matdes.2018.06.048 ↗
28. Effects of ultrasonic vibration on the microstructure and mechanical properties of high alloying TiAl10.1038/srep41463 ↗
29. Compression properties and work-hardening behavior of Ti2AlC/TiAl composites fabricated by combustion synthesis and hot press consolidation in the Ti-Al-Nb-C system10.1016/j.matdes.2011.05.041 ↗
30. Comparative study of the compression properties of TiAl matrix composites reinforced with nano-TiB2 and nano-Ti5Si3 particles10.1016/j.msea.2012.10.001 ↗
31. Deformation mechanisms in micron-sized PST TiAl compression samples: experiment and model10.1016/j.actamat.2011.02.016 ↗
32. Microstructure and compression behavior of in-situ synthesized Ti2AlC reinforced Ti-48Al-2Cr alloy with carbon nanotubes addition10.1016/j.jallcom.2021.158646 ↗
33. Q. C. Jiang. Microstructural configuration and compressive deformation behavior of a TiAl composite reinforced by Mn and in situ Ti2AlC particles10.1016/j.msea.2021.141772 ↗
34. Effects of Cu, Zn, W and Mo on the compression properties of in-situ nano-Ti5Si3/TiAl composite10.1142/S0217979219400514 ↗
35. Elevated temperature compressive deformation behaviors of γ-TiAl-based Ti-48Al-2Cr-2Nb alloy additively manufactured by electron beam melting10.1016/j.intermet.2020.106859 ↗
36. Effect of Nb additions on microstructure and properties of γ-TiAl based alloys fabricated by selective laser melting10.1016/S1003-6326(19)65009-0 ↗
37. Crystal plasticity analysis of deformation anisotropy of lamellar TiAl alloy: 3D microstructure-based modelling and in-situ micro-compression10.1016/j.ijplas.2019.04.012 ↗
38. Enhanced compressive strength and tailored microstructure of selective laser melted Ti-46.5Al-2.5Cr-2Nb-0.5Y alloy with different boron addition10.1016/j.msea.2018.06.042 ↗
39. Influence of Mn addition on the microstructure and mechanical properties of a directionally solidified γ-TiAl alloy10.1016/j.matchar.2018.01.029 ↗
40. Effects and mechanism of ultrasonic irradiation on solidification microstructure and mechanical properties of binary TiAl alloys10.1016/j.ultsonch.2017.03.006 ↗
41. Electron beam melted TiC/high Nb–TiAl nanocomposite: microstructure and mechanical property10.1016/j.msea.2021.141059 ↗
42. Mechanical behavior of damage tolerant TiB whisker-reinforced in situ titanium matrix composites10.1016/0956-7151(94)90199-6 ↗
43. Influence of cavitation treatment of melts on the processes of nucleation and growth of crystals during solidification of ingots and castings from light alloys10.1016/1350-4177(94)90029-9 ↗
44. Observation of synchronous picosecond sonoluminescence\10.1038/352318a0 ↗
45. Effect of grain size and temperature on the yield stress of the intermetallic compound TiAl10.1016/0036-9748(89)90434-1 ↗
46. Ti-46Al-4Nb alloy refined and reinforced by in-situ TiC nanoparticles and TiB2 whiskers10.1016/j.jallcom.2021.162195 ↗
47. Analytic model for the Orowan dislocation-precipitate bypass mechanism10.1016/j.mtla.2020.100671 ↗
48. Precipitation behavior of silicide and synergetic strengthening mechanisms in TiB-reinforced high-temperature titanium matrix composites during multi-directional forging10.1016/j.jallcom.2021.159051 ↗
49. O. Bajana. Room temperature mechanical behaviour of cast in-situ TiAl matrix composite reinforced with carbide particles10.1016/j.intermet.2018.11.007 ↗