journal article·2022-04

Atomistic studies of the responses of composites with thermal residual stresses and defects under uniaxial loading

Yongnan Xiong, Wangyu Hu, Yao Shu, Xing Luo, Zhibo Zhang, Jiazhen He, Cuicui Yin, Kaihong Zheng

Publisher page

Abstract

The thermal residual stresses and plastic deformation caused by the coefficient of thermal expansion (CTE) mismatch in the cooling process play an important role in the physical and mechanical properties of metal matrix composites (MMCs). In this study, the Cu/SiCp composites with and without cooling process are subjected to uniaxial tensile and compressive loadings through molecular dynamics (MD) simulation. We found that the cooling process leads to a decrease in strength and earlier yielding. The mechanical response depends on the temperature drop, and samples cooled from a higher temperature have a lower yield strength. The introduction of reinforcements and thermally induced defects reduce the tension/compression (C/T) asymmetry as compared with that of single crystal and defective Cu. These pre-existing defects can be the source for the initiation of plasticity in early stage of external loading, and the defect evolution shows a C/T asymmetry. For the density of two predominant dislocation types, the Shockley partial increases at the stress buildup stage, while the stair-rod dislocation decreases, regardless of tension and compression. The mechanisms for the dissociation of stair-rod dislocation and incomplete stacking fault tetrahedrons (ISFTs) at the stress buildup stage have been revealed. Our results provide an atomic-scale perspective to understand the influence of thermally residual stresses and defects on mechanical behavior of MMCs.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Microstructure and mechanical properties · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Metal matrix composites
2. Thermal residual stress in metal matrix composite10.1016/0001-6160(87)90188-X ↗
3. Evolution of phase stresses in Al/SiCp composite during thermal cycling and compression test studied using diffraction and self-consistent models10.1016/j.jmst.2019.03.046 ↗
4. Initial dislocation distributions in tungsten fibre-copper composites10.1007/BF00549547 ↗
5. Dislocation generation due to differences between the coefficients of thermal expansion10.1016/0025-5416(86)90261-2 ↗
6. The influence of thermal residual stresses and thermal generated dislocation on the mechanical response of particulate-reinforced metal matrix nanocomposites10.1016/j.compositesb.2015.08.008 ↗
7. Thermal residual stresses in metal matrix composites: a review10.1007/BF00567374 ↗
8. The effect of thermal mismatch on the thermal conductance of Al/SiC and Cu/diamond composites10.1063/1.5133982 ↗
9. Strengthening of composites due to microstructural changes in the matrix10.1016/0956-7151(91)90327-W ↗
10. Anin situ HVEM study of dislocation generation at Al/SiC interfaces in metal matrix composites10.1007/BF02643944 ↗
11. The tensile response and fracture behavior of 2009 aluminum alloy metal matrix composite10.1016/S0921-5093(02)00481-1 ↗
12. Properties and deformation behaviour of Mg-Y2O3 nanocomposites10.1016/j.actamat.2007.05.032 ↗
13. Comparison between current models for the strength of particulate-reinforced metal matrix nanocomposites with emphasis on consideration of Hall–Petch effect10.1016/j.msea.2011.10.043 ↗
14. Residual stresses and their effects on deformation10.1007/BF02646527 ↗
15. Aspects of residual thermal stress/strain in particle reinforced metal matrix composites10.1016/S1359-8368(99)00060-8 ↗
16. Three-dimensional modelling of thermal residual stresses and mechanical behavior of cast SiC/A1 particulate composites10.1016/0956-7151(94)90458-8 ↗
17. Effects of thermal residual stresses and thermal-induced geometrically necessary dislocations on size-dependent strengthening of particle-reinforced MMCs10.1016/j.compstruct.2018.05.129 ↗
18. Composite structure modeling and mechanical behavior of particle reinforced metal matrix composites10.1016/j.msea.2014.01.024 ↗
19. The influence of particle size and particle fracture on the elastic/plastic deformation of metal matrix composites10.1016/1359-6454(96)00008-0 ↗
20. An enhanced continuum model for size-dependent strengthening and failure of particle-reinforced composites10.1016/j.actamat.2009.08.010 ↗
21. A fast numerical method of introducing the strengthening effect of residual stress and strain to tensile behavior of metal matrix composites10.1016/j.jmst.2021.01.079 ↗
22. Probing the limits of metal plasticity with molecular dynamics simulations10.1038/nature23472 ↗
23. Atomistic simulation of the mechanical behaviors of co-continuous Cu/SiC nanocomposites10.1016/j.compositesb.2012.04.010 ↗
24. Atomistic investigation of the effect of nano-structural shape on the mechanical response of SiC/Cu interpenetrating phase nanocomposites10.1016/j.commatsci.2016.02.023 ↗
25. Multiscale modeling of interfacial mechanical behaviours of SiC/Mg nanocomposites10.1016/j.matdes.2019.108093 ↗
26. Microstructural and mechanical characteristics of hybrid SiC/Cu composites with nano- and micro-sized SiC particles10.1016/j.ceramint.2018.10.235 ↗
27. SiC content effect on the properties of Cu-SiC composites produced by mechanical alloying10.1016/j.jallcom.2015.01.298 ↗
28. Microstructural evolution and degradation mechanism of SiC–Cu chip attachment using sintered nano-Ag paste during high-temperature ageing10.1016/j.jallcom.2020.156442 ↗
29. Atomistic simulation on the generation of defects in Cu/SiC composites during cooling
30. Structural stability and lattice defects in copper: Ab initio, tight-binding, and embedded-atom calculations10.1103/PhysRevB.63.224106 ↗
31. Interaction potential for silicon carbide: a molecular dynamics study of elastic constants and vibrational density of states for crystalline and amorphous silicon carbide10.1063/1.2724570 ↗
32. Friction and tool wear in nano-scale machining–a molecular dynamics approach10.1016/0043-1648(95)06633-0 ↗
33. Molecular dynamics simulation of grain growth of Cu film: effects of adhesion strength between substrate and Cu atoms10.2320/matertrans.MG200903 ↗
34. Fast parallel algorithms for short-range molecular dynamics10.1006/jcph.1995.1039 ↗
35. LAMMPS - a flexible simulation tool for particle-based materials modeling at the atomic, meso, and continuum scales10.1016/j.cpc.2021.108171 ↗
36. Visualization and analysis of atomistic simulation data with OVITO–the Open Visualization Tool10.1088/0965-0393/18/1/015012 ↗
37. Extracting dislocations and non-dislocation crystal defects from atomistic simulation data10.1088/0965-0393/18/8/085001 ↗
38. Structure identification methods for atomistic simulations of crystalline materials10.1088/0965-0393/20/4/045021 ↗
39. Tension-compression asymmetry in homogeneous dislocation nucleation in single crystal copper
40. Finite element modelling of residual stresses and strength differential effect in discontinuously reinforced metal matrix composites10.1016/0921-5093(94)90895-8 ↗
41. Influence of single crystal orientation on homogeneous dislocation nucleation under uniaxial loading10.1016/j.jmps.2007.11.012 ↗
42. Crystal orientation effect on dislocation nucleation and multiplication in FCC single crystal under uniaxial loading10.1016/j.ijplas.2013.04.010 ↗
43. Stacking fault tetrahedron induced plasticity in copper single crystal10.1016/j.msea.2016.10.034 ↗
44. Stacking fault tetrahedra in metals10.1016/j.scriptamat.2014.07.020 ↗
45. Story of stacking fault tetrahedra10.1016/S0254-0584(97)80250-7 ↗
46. Molecular dynamics study on the formation of stacking fault tetrahedra and unfaulting of Frank loops in fcc metals10.1016/j.actamat.2007.01.010 ↗
47. Dislocation-stacking fault tetrahedron interactions in Cu10.1115/1.1479692 ↗
48. Mechanisms of stacking fault tetrahedra destruction by gliding dislocations in quenched gold10.1080/14786430801898644 ↗
49. Advanced metal matrix nanocomposites10.3390/met9030330 ↗
50. Size-dependent inelastic behavior of particle-reinforced metal–matrix composites10.1016/S0266-3538(00)00235-9 ↗