journal article·2022-04

Study on mechanical behavior and microstructure evolution of Al-Mg-Li alloy during electropulsing assisted uniaxial tensile

Han Xiao, Xiangsheng Xia, Shuhai Huang, Qiang Chen, Gaozhan Zhao, Zude Zhao, Yanbin Wang, Shuxin Chai, Feifei Peng

Publisher page

Abstract

The mechanical behavior and microstructure evolution of Al-Mg-Li alloys under the effect of electric current was investigated using an electropulsing-assisted uniaxial tensile (EAUT) test combined with microstructure observations . It was found that the localized Joule heating-induced microscale high temperature at the grain boundaries in the necking zone significantly accelerated the grain boundary weakening when necking occurred, which resulted in rapid intergranular fracture and relevant decrease in elongation. Electropulsing induced continuous dynamic recrystallization (CDRX) in the both side layers and the discontinuous dynamic recrystallization (DDRX) in the intermediate layers of the Al-Mg-Li sheet during EAUT testing at 460 °C and higher, promoting the formation of newly near-equiaxed recrystallized grains and weakening of β-fiber texture components. For the conventional high temperature tensile test, only a small amount of recrystallized grains formed along the grain boundaries of the coarse parent grains under the control of DDRX. The occurrence of CDRX during EAUT was substantially attributed to the promoted effect of electropulsing on dislocation glide and climb, which resulted from the combined effect of microscale localized Joule heating around dislocations and the electro-induced enhancement effect on vacancy diffusion.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electromagnetic Effects on Materials · Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. Comparison of microstructure and mechanical properties of Al-Mg-Li-Sc-Zr alloys processed by ingot metallurgy and rapid solidification10.1016/j.jallcom.2021.160937 ↗
2. Strengthening mechanisms, deformation behavior, and anisotropic mechanical properties of Al-Li alloys: a review10.1016/j.jare.2017.12.004 ↗
3. Effect of the aging process and pre-deformation on the precipitated phase and mechanical properties of 2195 Al–Li alloy10.1016/j.msea.2021.142394 ↗
4. The evolution of Al-Li base products for aerospace and space applications10.1007/s11661-012-1155-z ↗
5. Variation of mechanical properties and microstructure of hot-rolled AA2099 Al-Li alloy induced by the precipitation during preheating process10.1016/j.jmst.2021.09.035 ↗
6. Effect of scandium addition on evolution of microstructure, texture and mechanical properties of thermo-mechanically processed Al-Li alloy AA219510.1016/j.jallcom.2017.12.045 ↗
7. An investigation on the anisotropic plastic behavior and forming limits of an Al-Mg-Li alloy sheet10.1007/s11665-021-05981-0 ↗
8. Effects of coarse Al2CuLi phase on the hot deformation behavior of Al-Li alloy10.1016/j.jallcom.2019.152469 ↗
9. Microstructure and micro-texture evolution during large strain deformation of an aluminium-copper-lithium alloy AA 219510.1016/j.matdes.2014.09.037 ↗
10. Constitutive modeling and microstructure characterization of 2196 Al-Li alloy in various hot deformation conditions10.1016/j.jmapro.2020.09.063 ↗
11. Deformation behavior and microstructure evolution of Al-5.06Mg-1.67Li-0.51Zn alloy under hot compression10.1016/j.jmrt.2021.10.084 ↗
12. Processing, microstructure and property aspects of a spraycast Al-Mg-Li-Zr alloy10.1016/j.actamat.2006.10.057 ↗
13. Effect of Al3Zr particles on hot-compression behavior and processing map for Al-Cu-Li based alloy at elevated temperatures10.1016/S1003-6326(20)65261-X ↗
14. The effects of precipitates on microstructure and β-fiber texture in an Al-Cu-Li alloy during hot rolling10.1016/j.matchar.2020.110186 ↗
15. A new dynamic recrystallisation model of an extruded Al-Cu-Li alloy during high-temperature deformation10.1016/j.msea.2014.11.095 ↗
16. Improving creep age formability of an Al-Cu-Li alloy by electropulsing10.1016/j.jallcom.2021.159482 ↗
17. Rapidly modifying microstructure and mechanical properties of AA7150 Al alloy processed with electropulsing treatment10.1016/j.jmst.2021.03.060 ↗
18. Grain refinement of Al-Mg-Si alloy without any mechanical deformation and matrix phase transformation via cyclic electro-pulsing treatment
19. Exceptional mechanical properties of AZ31 alloy wire by combination of cold drawing and EPT10.1016/j.jmst.2020.02.044 ↗
20. Microstructure evolution and mechanical properties of an AZ61 alloy processed with TS-ECAP and EPT10.1016/j.msea.2020.139195 ↗
21. Accelerated recrystallization behavior of commercially pure titanium subjected to an alternating-current electropulse10.1016/j.jmrt.2021.11.045 ↗
22. Mechanism of an acceleration in T1 precipitation kinetics in an Al-Cu-Li alloy by electropulsing10.1016/j.vacuum.2021.110558 ↗
23. Investigation on the ageing behaviour and hardening mechanisms of 5A90 Al–Li alloy U-shaped parts formed by electric resistance heating forming-quenching process10.1016/j.jallcom.2021.159120 ↗
24. Defect reconfiguration in a Ti–Al alloy via electroplasticity10.1038/s41563-020-00817-z ↗
25. Experimental investigation into the electropulsing assisted pulsating gas forming of CP-Ti tubes10.1016/j.jmatprotec.2019.116492 ↗
26. Experimental investigation on the deformation behaviors of Ti-6Al-4V sheet in electropulsing-assisted incremental forming10.1007/s00170-019-04133-y ↗
27. Modeling of thermal and mechanical behavior of a magnesium alloy AZ31 during electrically-assisted micro-tension10.1016/j.ijplas.2016.07.008 ↗
28. Softening behavior of Al-Zn-Mg alloys with different strengthening mechanisms in a coupled field10.1016/j.msea.2019.138582 ↗
29. Electric current-assisted deformation behavior of Al-Mg-Si alloy under uniaxial tension10.1016/j.ijplas.2016.09.010 ↗
30. Salandro · 2015
31. Mechanism for the macro and micro behaviors of the Ni-based superalloy during electrically-assisted tension: Local Joule heating effect10.1016/j.jallcom.2018.01.325 ↗
32. Achieving outstanding combination of strength and ductility of the Al-Mg-Li alloy by cold rolling combined with electropulsing assisted treatment10.1016/j.matdes.2019.108279 ↗
33. Impact of grain microstructure on the heterogeneity of precipitation strengthening in an Al-Li-Cu alloy10.1016/j.msea.2014.12.073 ↗
34. Study on the microstructure evolution and mechanical properties of an Al-Mg-Li alloy aged by electropulsing assisted ageing processing10.1016/j.msea.2019.04.049 ↗
35. Electron force-induced dislocations annihilation and regeneration of a superalloy through electrical in-situ transmission electron microscopy observations10.1016/j.jmst.2019.08.008 ↗
36. Messerschmidt · 2010
37. Improving deformability of Sb2Te3 layered material by dislocation climb at anti-phase boundary10.1016/j.scriptamat.2017.03.010 ↗
38. Mechanical behavior and hardening characteristics of a superplastic Ti-6Al-4V alloy10.1007/BF02658391 ↗
39. An investigation of cavity growth in a superplastic aluminum alloy processed by ECAP10.1016/j.actamat.2005.08.012 ↗
40. Caillard · 2003
41. On the thermodynamics and kinetics of electropulsing induced dissolution of β-Mg17Al12 phase in an aged Mg–9Al–1Zn alloy10.1016/j.actamat.2009.06.044 ↗
42. Effects of electric current on solid state phase transformations in metals10.1016/S0921-5093(00)00780-2 ↗
43. Thermally activated plastic flow of metals and ceramics with an electric field or current10.1016/S0921-5093(01)01122-4 ↗
44. Investigations of pipe-diffusion-based dislocation climb by discrete dislocation dynamics10.1016/j.ijplas.2010.11.003 ↗
45. Hirth · 1982
46. Rapidly modifying microstructure and mechanical properties of AA7150 Al alloy processed with electropulsing treatment10.1016/j.jmst.2021.03.060 ↗
47. Current issues in recrystallization: a review10.1016/S0921-5093(97)00424-3 ↗
48. Effect of bimodal microstructure on texture evolution and mechanical properties of 1050 Al alloy processed through severe plastic deformation and subsequent annealing10.1016/j.msea.2021.141580 ↗
49. Microstructure, texture and interface integrity in sheets processed by Asymmetric Accumulative Roll-Bonding10.1016/j.msea.2019.138634 ↗
50. Dynamic recrystallization microstructures under hot working conditions10.1016/0924-0136(95)01992-N ↗
51. Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions10.1016/j.pmatsci.2013.09.002 ↗
52. Recrystallization and grain growth10.1016/0502-8205(52)90009-9 ↗
53. Analysis of abnormal texture formation and strengthening mechanism in an extruded Mg-Gd-Y-Zn-Zr alloy10.1016/j.jmst.2019.11.021 ↗
54. Mechanism of high-strength and ductility of Mg-RE alloy fabricated by low-temperature extrusion and aging treatment10.1016/j.matdes.2020.109384 ↗
55. Hatherly · 2004