journal article·2022-03

Atomic layer deposition-based synthesis of TiO2 and Al2O3 thin-film coatings on nanoparticle powders for sodium-ion batteries with enhanced cyclic stability

Song Yeul Lee, Dasom Park, Byung Sun Yoon, Yun-Sung Lee, Yong Il Park, Chang Hyun Ko

Publisher page

Abstract

Despite it being the leading technology for fabricating uniform-thickness metal and metal-oxide thin films on wafer-based substrates, atomic layer deposition (ALD) is yet to be utilized with powder-based substrates. Via the successful deposition of TiO 2 and Al 2O 3 thin films on the surfaces of silica (SiO 2 ) nanospheres, Prussian blue (PB) nanocubes, and NaTi 2(PO 4) 3 (NTP) nanocubes using a home-built ALD system, this study demonstrates that ALD is a viable technique for depositing thin films on powdered substrates. Furthermore, amorphous TiO 2 thin films are used as a protective layer to enhance the electrochemical properties of NTP nanocubes, which have application prospects in sodium-ion batteries. Whereas uncoated NTP nanocubes loses 67.9% of its initial charge capacity within 100 charge/discharge cycles, TiO 2 -coated (thickness: ~ 3 nm) NTP nanocubes reduces this capacity loss to 22.1%. This strongly suggests that powder-optimized ALD can be used to fabricate thin films for multiple applications that use powder-type nanoparticles, such as electrode materials and catalysts.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Semiconductor materials and devices · Advanced Memory and Neural Computing

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Hunting sodium dendrites in NASICON-based solid-state electrolytes10.34133/2021/9870879 ↗
2. Efficient stabilization of Na storage reversibility by Ti integration into O′3-type NaMnO2
3. Recent advances in electrode materials with anion redox chemistry for sodium-ion batteries10.34133/2021/9819521 ↗
4. Sodium-ion battery materials and electrochemical properties reviewed10.1002/aenm.201800079 ↗
5. Research development on sodium-ion batteries10.1021/cr500192f ↗
6. Na-ion batteries, recent advances and present challenges to become low cost energy storage systems10.1039/c2ee02781j ↗
7. Electrode materials for rechargeable sodium-ion batteries: potential alternatives to current lithium-ion batteries10.1002/aenm.201200026 ↗
8. Popcorn derived carbon enhances the cyclic stability of MoS2 as an anode material for sodium-ion batteries10.1016/j.electacta.2019.04.070 ↗
9. NiSe2 nanooctahedra as an anode material for high-rate and long-life sodium-ion battery10.1021/acsami.6b10143 ↗
10. Cagelike CoSe2@N-doped carbon aerogels with pseudocapacitive properties as advanced materials for sodium-ion batteries with excellent rate performance and cyclic stability10.1021/acsami.0c06296 ↗
11. Cycle performance improvement of NaCrO2 cathode by carbon coating for sodium ion batteries10.1016/j.elecom.2012.06.001 ↗
12. Hierarchically carbon-coated Na3V2(PO4)3 nanoflakes for high-rate capability and ultralong cycle-life sodium ion batteries10.1016/j.cej.2018.01.088 ↗
13. ALD TiO2-coated flower-like MoS2 nanosheets on carbon cloth as sodium ion battery anode with enhanced cycling stability and rate capability10.1021/acsami.6b13179 ↗
14. Precise surface engineering of cathode materials for improved stability of lithium-ion batteries
15. Synthesis and surface engineering of complex nanostructures by atomic layer deposition10.1002/adma.200700079 ↗
16. Modification of Pd/CeO2 catalyst by atomic layer deposition of ZrO210.1016/j.apcatb.2015.12.028 ↗
17. High-surface-area, iron-oxide films prepared by atomic layer deposition on γ-Al2O310.1016/j.apcata.2017.01.025 ↗
18. High-surface-area ceria prepared by ALD on Al2O3 support10.1016/j.apcatb.2016.08.054 ↗
19. Improved coking resistance of “intelligent” Ni catalysts prepared by atomic layer deposition10.1021/acscatal.8b01598 ↗
20. SnO2 atomic layer deposition on ZrO2 and Al nanoparticles: pathway to enhanced thermite materials10.1016/j.powtec.2005.04.009 ↗
21. Aggregation behavior of nanoparticles in fluidized beds10.1016/j.powtec.2005.08.019 ↗
22. Enhanced stability of LiCoO2 cathodes in lithium-ion batteries using surface modification by atomic layer deposition10.1149/1.3258274 ↗
23. Ultrathin direct atomic layer deposition on composite electrodes for highly durable and safe Li-Ion batteries10.1002/adma.200903951 ↗
24. Unexpected high power performance of atomic layer deposition coated Li[Ni1/3Mn1/3Co1/3]O2 cathodes10.1016/j.jpowsour.2013.12.119 ↗
25. Controlled growth of monodisperse silica spheres in the micron size range10.1016/0021-9797(68)90272-5 ↗
26. High-quality Prussian blue crystals as superior cathode materials for room-temperature sodium-ion batteries10.1039/C3EE44004D ↗
27. A high-rate and ultralong-life sodium-ion battery based on NaTi2(PO4)3 nanocubes with synergistic coating of carbon and rutile TiO210.1002/smll.201500144 ↗
28. Titanium isopropoxide as a precursor for atomic layer deposition: characterization of titanium dioxide growth process10.1016/S0169-4332(00)00274-9 ↗
29. Low-temperature Al2O3 atomic layer deposition10.1021/cm0304546 ↗
30. Impact of parasitic reactions on wafer-scale uniformity in water-based and ozone-based atomic layer deposition10.1116/1.3620421 ↗
31. Al3O3 thin film growth on Si(100) using binary reaction sequence chemistry10.1016/S0040-6090(96)08934-1 ↗
32. Atomic layer controlled deposition of Al2O3 films using binary reaction sequence chemistry10.1016/S0169-4332(96)00503-X ↗
33. Nucleation and growth during Al2O3 atomic layer deposition on polymers10.1021/cm050704d ↗
34. First principles study of the atomic layer deposition of alumina by TMA–H2O-process10.1039/C5CP01912E ↗
35. Synthesizing porous NaTi2(PO4)3 nanoparticles embedded in 3D graphene networks for high-rate and long cycle-life sodium electrodes10.1021/acsnano.5b02787 ↗
36. Core-shell Si@TiO2 nanosphere anode by atomic layer deposition for Li-ion batteries10.1016/j.jpowsour.2016.01.049 ↗
37. Structural and electrochemical study of Al2O3 and TiO2 coated Li1.2Ni0.13Mn0.54Co0.13O2 cathode material using ALD10.1002/aenm.201300269 ↗
38. Understanding electrochemical potentials of cathode materials in rechargeable batteries10.1016/j.mattod.2015.10.009 ↗
39. Mesoporous amorphous FePO4 nanospheres as high-performance cathode material for sodium-ion batteries10.1021/nl501152f ↗
40. A graphene–amorphous FePO4 hollow nanosphere hybrid as a cathode material for lithium ion batteries10.1039/c2cc17381f ↗
41. Understanding electronic and Li-ion transport of LiNi0.5Co0.2Mn0.3O2 electrodes affected by porosity and electrolytes using electrochemical impedance spectroscopy10.1016/j.jpowsour.2021.230338 ↗