journal article·2022-04

Electrochemical properties of the heat-treated Ti-6Al-4V alloy manufactured by direct energy deposition

Svetlana A. Shalnova, Marina O. Gushchina, Darya A. Strekalovskaya, Ekaterina L. Alekseeva, Olga G. Klimova-Korsmik

Publisher page

Abstract

Additive technologies are actively implemented in various industries. The actual task is a complex study of the properties of the products. In the present work, electrochemical studies of the heat-treated Ti-6Al-4V alloy manufactured by Direct Energy Deposition were carried out to determine the evolution of electrochemical and mechanical properties. The analysis of the structure and phase composition were compared with the results of electrochemical and mechanical properties. The effect of the lamellae size and phase composition on corrosion and mechanical properties is more pronounced for the DED Ti-6Al-4V alloy. It was determined that the best electrochemical properties are possessed by a heat treated sample at 800 °C. With an increase the temperature of the heat treatment up to 900 °C, the corrosion resistance decreases, however, the values of relative elongation increase.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Titanium Alloys Microstructure and Properties · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Anisotropic tensile behavior of Ti–6Al–4V components fabricated with directed energy deposition additive manufacturing10.1016/j.actamat.2014.12.054 ↗
2. Leyens · 2003
3. Corrosion behavior of additively manufactured Ti-6Al-4V parts and the effect of post annealing
4. Corrosion assessment of Ti-6Al-4V fabricated using laser powder-bed fusion additive manufacturing10.1016/j.electacta.2018.04.189 ↗
5. On the stability of thin-anodic-oxide films of titanium in acid phosphoric media10.1016/S0010-938X(00)00162-1 ↗
6. Konda Gokuldoss Prashanth, Interfacial structure and wear properties of selective laser melted Ti/(TiC+TiN) composites with high content of reinforcements10.1016/j.jallcom.2021.159436 ↗
7. The anisotropic corrosion behaviour of wire arc additive manufactured Ti-6Al-4V alloy in 3.5% NaCl solution10.1016/j.corsci.2018.03.047 ↗
8. Selective laser melting of high-strength, low-modulus Ti–35Nb–7Zr–5Ta alloy10.1016/j.mtla.2020.100941 ↗
9. Effect of scanning strategy on mechanical properties of Ti-6Al-4V alloy manufactured by laser direct energy deposition
10. Selective laser melting of Ti6Al4V: effect of laser re-melting10.1016/j.msea.2020.140558 ↗
11. Topology-optimized lattice structures with simultaneously high stiffness and light weight fabricated by selective laser melting: Design, manufacturing and characterization10.1016/j.jmapro.2020.06.005 ↗
12. Heat treatment of Ti-6Al-4V alloy manufactured by laser-based powder-bed fusion: process, microstructures, and mechanical properties correlations
13. Analysis of microstructure and mechanical properties of additive repaired Ti–6Al–4V by direct energy deposition10.1016/j.msea.2020.140604 ↗
14. The influence of heat treatment on the microstructure of products manufactured by direct laser deposition using titanium alloy Ti-6Al-4V10.1016/j.matpr.2020.01.523 ↗
15. Targeted heat treatment of additively manufactured Ti-6Al-4V for controlled formation of Bi-lamellar microstructures10.1016/j.jmst.2021.01.004 ↗
16. Corrosion behavior of additively manufactured Ti-6Al-4V parts and the effect of post annealing
17. A study of modes of hardening heat treatment of titanium alloy VT2310.1007/s11041-019-00345-x ↗
18. ASTM F1472–14Standard Specification for Wrought Titanium-6Aluminum-4Vanadium Alloy for Surgical Implant Applications (UNS R56400), ASTM International, West Conshohocken, PA, 2014.
19. GOST 9.912-89 Unified system of corrosion and ageing protection. Corrosion-resistant steels and alloys. Method of accelerated tests for resistance to pitting corrosion, 1991.
20. Influence of position and laser power on thermal history and microstructure of direct laser fabricated Ti–6Al–4V samples10.1179/174328405X21003 ↗
21. Heat treatment of additively manufactured Ti- 6Al-4V alloy: microstructure and electrochemical properties10.1016/j.jallcom.2021.161602 ↗
22. Effect of temperature field on mechanical properties of direct laser deposited Ti-6Al-4V aloy10.1088/1757-899X/969/1/012103 ↗
23. W.G. Burgers, On the process of transition of thecubic-body-centered modification into the hexagonal-close-packed modificationof zirconium/ W.G. Burgers // Physica – 1934.-Vol. 1. Iss.7, pp. 561-586. https://doi.org/10.1016/S0031-8914, 34, 80244-3.10.1016/S0031-8914(34)80244-3 ↗
24. Martensitic transformations in Ti-6Al-4V (ELI) alloy manufactured by 3D Printing10.1016/j.matchar.2018.09.042 ↗
25. Phase transformations during cooling in α+β titanium alloys
26. Effect of grain size and twins on corrosion behaviour of AZ31B magnesium alloy10.1016/j.corsci.2009.10.018 ↗
27. Effect of surface nanocrystallization on the corrosion behaviour of AISI 409 stainless steel10.1016/j.corsci.2010.07.004 ↗
28. Microstructure and corrosion properties of Ti-6Al-4V alloy by ultrasonic shot peening10.1016/S1452-3981(23)11168-0 ↗