journal article·2022-03

Post-dynamic recrystallization behavior of a powder metallurgy Ni-Co-Cr based superalloy under different deformation conditions

Shichang Qiao, Yan Wang, Liangxing Lv, Gang Tan, Tianwei Cheng, Jingjun He

Publisher page

Abstract

Abstract The post-dynamic recrystallization (PDRX) behavior of a powder metallurgy (PM) Ni-Co-Cr based superalloy was researched by thermal compression tests at the temperature range of 1020-1080 ℃ within the strain rates of 0.01-1 s-1, followed by heat preservation for 0-45 s after deformed to 10%-50%. Electron backscatter diffraction (EBSD) and Transmission Electron Microscope (TEM) techniques were employed to investigate the effect of the deformation conditions on PDRX behavior. The results show that the deformation conditions (strain rate, temperature, degree of deformation and holding time) have great impact on the PDRX kinetics. Increasing deformation temperature, strain or holding time can result in the effective release of residual deformation stored energy, promoting the PDRX course. The irregular energy storage release of the superalloy deformed at different strain rates is mainly concerned with the various microstructure evolution during heat preservation. The evolution of twin boundary (Σ3) during PDRX exhibits the similar regularity with that of recrystallization fraction. The formation of Σ3 boundary induces the recrystallized nucleation, leading to further release of deformation storage energy. Meta-dynamic recrystallization (MDRX) and static recrystallization (SRX) are the dominant mechanisms of PDRX, and the nucleation induced by undissolved γ' precipitates or assisted by twins also play certain roles in microstructure evolution during heat preservation of the deformed superalloy.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgy and Material Forming · High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Effect of cooling rate and resulting microstructure on tensile properties and deformation mechanisms of an advanced PM nickel-based superalloy10.1016/j.jallcom.2019.07.221 ↗
2. Controlling the grain boundary morphology and secondary γ′ precipitate size distribution in Ni-base superalloys10.1016/j.jallcom.2018.10.031 ↗
3. Microstructure evolution and mechanical properties of a new cast Ni-base superalloy with various Ti contents10.1016/j.jallcom.2017.11.074 ↗
4. Thermal deformation and dynamic recrystallization of a novel HEXed P/M nickel-based superalloy10.1016/j.matchar.2020.110285 ↗
5. Flow behaviors and microstructural evolutions of a novel high-Co powder metallurgy superalloy during hot working10.1016/j.jmatprotec.2018.06.039 ↗
6. Experimental study and numerical simulation of dynamic recrystallization for a FGH96 superalloy during isothermal compression10.1016/j.jmrt.2020.03.026 ↗
7. Microstructure evolutions and nucleation mechanisms of dynamic recrystallization of a powder metallurgy Ni-based superalloy during hot compression10.1016/j.msea.2016.09.083 ↗
8. Effect of Zener-Hollomon parameter on microstructure evolution of a HEXed PM nickel-based superalloy10.1016/j.jallcom.2021.159889 ↗
9. Microstructural evolution of a Ni-Co based superalloy during hot compression at γ′ sub-/super-solvus temperatures10.1016/j.jmst.2020.10.042 ↗
10. Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions10.1016/j.pmatsci.2013.09.002 ↗
11. Influence of strain rate on subsolvus dynamic and post-dynamic recrystallization kinetics of Inconel 71810.1016/j.actamat.2019.05.061 ↗
12. In situ characterization of inconel 718 post-dynamic recrystallization within a scanning electron microscope
13. Mean field modelling of dynamic and post-dynamic recrystallization during hot deformation of Inconel 718 in the absence of δ phase particles10.1016/j.msea.2015.12.102 ↗
14. Dynamic and post-dynamic recrystallization during supersolvus forging of the new nickel-based superalloy—VDM Alloy 780
15. Grain boundary character distribution during the post-deformation recrystallization of Incoloy 800H at elevated temperature10.1016/j.matlet.2015.10.034 ↗
16. Behavior and modeling of microstructure evolution during metadynamic recrystallization of a Ni-based superalloy10.1016/j.msea.2016.08.061 ↗
17. Colliander, Dynamic and post-dynamic recrystallization of haynes 282 below the secondary carbide solvus
18. Recrystallization of 30Cr2Ni4MoV ultra-super-critical rotor steel during hot deformation. Part III: Metadynamic recrystallization10.1016/j.msea.2012.01.061 ↗
19. Recrystallization in AISI 304 austenitic stainless steel during and after hot deformation10.1016/j.msea.2007.08.026 ↗
20. Recovery and recrystallization of polycrystalline nickel after hot working10.1016/0001-6160(88)90246-5 ↗
21. A mean field model of dynamic and post-dynamic recrystallization predicting kinetics, grain size and flow stress10.1016/j.commatsci.2015.02.043 ↗
22. Development and validation of a finite-element model for isothermal forging of a nickel-base superalloy10.1016/j.mtla.2019.100319 ↗
23. Grain Boundary Engineering of a Low Stacking Fault Energy Ni-based Superalloy10.1007/s11661-017-3977-1 ↗
24. Stored energy and taylor factor relation in an Al-Mg-Mn alloy sheet worked by continuous cyclic bending10.2320/matertrans.45.2316 ↗
25. A.G.I. Taylor, I. Part, R.S. Yarrow, The mechanism of plastic deformation of crystals. Part I.—Theoretical, Proc. R. Soc. London. Ser. A, Contain. Pap. a Math. Phys. Character. 145 (1934) 362–387. https://doi.org/10.1098/rspa.1934.0106.10.1098/rspa.1934.0106 ↗
26. Microstructure evolution during dynamic recrystallization of hot deformed superalloy 71810.1016/j.msea.2007.09.008 ↗
27. Coupled quantitative simulation of microstructural evolution and plastic flow during dynamic recrystallization10.1016/S1359-6454(01)00233-6 ↗
28. Hot deformation behavior of delta-processed superalloy 71810.1016/j.msea.2011.01.013 ↗
29. Hot deformation and recrystallization of austenitic stainless steel: Part II. Post-deformation recrystallization10.1007/s11661-008-9513-6 ↗
30. A Model for Static Recrystallization with Simultaneous Precipitation and Solute Drag10.1007/s11661-016-3524-5 ↗
31. Impact of γ′(Ni3(Al,Ti)) phase on dynamic recrystallization of a Ni-based disk superalloy during isothermal compression10.1016/j.jallcom.2016.09.258 ↗
32. The influence of γ′-precipitation on the recrystallization of a nickel base superalloy10.1016/0001-6160(80)90039-5 ↗
33. Recrystallization of high carbon steel between intervals of high temperature deformation10.1007/BF02648720 ↗
34. A critical assessment of experimental investigation of dynamic recrystallization of metallic materials10.1016/j.matdes.2020.108873 ↗
35. Evolution mechanisms of recrystallized grains and twins during isothermal compression and subsequent solution treatment of GH4586 superalloy10.1016/j.jallcom.2020.156732 ↗
36. Particle stimulated nucleation during dynamic and metadynamic recrystallisation of Ni-30%Fe-Nb-C alloy10.1016/j.matchar.2017.01.026 ↗
37. On the Coupling between Recrystallization and Precipitation Following Hot Deformation in a γ-γ′ Nickel-Based Superalloy10.1007/s11661-018-4707-z ↗
38. Effect of deformation parameters on twinning evolution during hot deformation in a typical nickel-based superalloy10.1016/j.msea.2017.04.077 ↗
39. Role of twinning on dynamic recrystallization and microstructure during moderate to high strain rate hot deformation of a Ti-modified austenitic stainless steel10.1007/s11661-011-1012-5 ↗
40. New insights into the evolution of twin boundaries during recrystallization and grain growth of low-SFE FCC alloys10.1016/j.matchar.2019.110015 ↗