journal article·2022-02

An innovative TiB whisker architecture of titanium matrix composite devised by scanning electron beam remodeling

Ning Li, Ting Wang, Siyuan Jiang

Publisher page

Abstract

Abstract A high-performance titanium matrix composite with innovative TiB whiskers reinforcement architecture was fabricated using scanning electron beam remodeling. The microstructure and mechanical properties were investigated, and the microstructure evolution and strengthening mechanism were discussed. Results show that a reformative titanium matrix composite with a three-dimensional equiaxed reinforcement architecture was built. The matrix and reinforcement were refined into needle martensite and clustered TiB whiskers with diffusionless transformation and eutectic reaction. With the contribution of fine-grain strengthening, whisker strengthening, and sub-structural strengthening, the ultimate tensile strength of the remodeled titanium matrix composites was 1456 MPa, increasing 275 MPa (23.3%) to the raw material. Moreover, the wear resistance was reinforced by the electron beam remodeling. This research could provide unique thoughts or references for the preparation of higher performance titanium matrix composites.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Aluminum Alloys Composites Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. Processing-structure-property aspects of particulate- and whisker-reinforced titanium matrix composites10.1016/j.compscitech.2007.07.016 ↗
2. A comprehensive review on material selection, processing, characterization and applications of aluminium metal matrix composites
3. Microstructurally inhomogeneous composites: is a homogeneous reinforcement distribution optimal?10.1016/j.pmatsci.2015.01.002 ↗
4. Recent progress in the development and properties of novel metal matrix nanocomposites reinforced with carbon nanotubes and graphene nanosheets10.1016/j.mser.2013.08.001 ↗
5. In situ TiBw/Ti-6Al-4V composites with novel reinforcement architecture fabricated by reaction hot pressing10.1016/j.scriptamat.2009.02.032 ↗
6. In-situ TiB/Ti-6Al-4V composites with a tailored architecture produced by hot isostatic pressing: microstructure evolution, enhanced tensile properties and strengthening mechanisms10.1016/j.compositesb.2019.01.080 ↗
7. In situ (TiBw+TiCp)/Ti6Al4V composites with a network reinforcement distribution10.1016/j.msea.2010.07.025 ↗
8. Microstructure and friction/wear behavior of (TiB + TiC) particulate-reinforced titanium matrix composites10.1016/j.wear.2014.05.013 ↗
9. Effects of first-scale TiBw on secondary-scale Ti5Si3characteristics and mechanical properties of in-situ (Ti5Si3+TiBw)/Ti6Al4V composites10.1016/j.jallcom.2017.02.044 ↗
10. Nano-scaled Ti5Si3 evolution and Strength Enhancement of titanium matrix composites with two-scale architecture via heat treatment10.1016/j.msea.2017.06.067 ↗
11. Cyclic plasticity and creep-cyclic plasticity behaviours of the SiC/Ti-6242 particulate reinforced titanium matrix composites under thermo-mechanical loadings10.1016/j.compstruct.2019.03.030 ↗
12. Mechanisms of simultaneously enhanced strength and ductility of titanium matrix composites reinforced with nanosheets of graphene oxides10.1016/j.ceramint.2019.06.189 ↗
13. Reinforcements stimulated dynamic recrystallization behavior and tensile properties of extruded (TiB + TiC + La2O3)/Ti6Al4V composites10.1016/j.jallcom.2016.12.418 ↗
14. Sintering effect on microstructural evolution and mechanical properties of spark plasma sintered Ti matrix composites reinforced by reduced graphene oxides10.1016/j.ceramint.2018.06.252 ↗
15. Uniform dispersion and interface analysis of nickel coated graphene nanoflakes/ pure titanium matrix composites10.1016/j.carbon.2018.05.013 ↗
16. Recent developments and opportunities in additive manufacturing of titanium-based matrix composites: a review10.1016/j.ijmachtools.2018.06.003 ↗
17. Titanium metal matrix composites: an overview10.1016/j.compositesa.2019.04.005 ↗
18. Progress on discontinuously reinforced titanium matrix composites10.1016/j.jallcom.2018.07.100 ↗
19. A variational approach to the theory of the elastic behaviour of multiphase materials10.1016/0022-5096(63)90060-7 ↗
20. Dry sliding wear characteristics of in-situ TiBw/Ti6Al4V composites with different network parameters10.1016/j.triboint.2018.01.053 ↗
21. Tailoring a novel network reinforcement architecture exploiting superior tensile properties of in situ TiBw/Ti composites10.1016/j.msea.2012.03.019 ↗
22. Effects of sintering parameters on the microstructure and tensile properties of in situ TiBw/Ti6Al4V composites with a novel network architecture10.1016/j.matdes.2011.02.023 ↗
23. Effects of heat treatments on microstructure and tensile properties of as-extruded TiBw/near-α Ti composites10.1016/j.matdes.2015.07.058 ↗
24. Comparative study on superplastic tensile behaviors of the as-extruded Ti6Al4V alloys and TiBw/Ti6Al4V composites with tailored architecture10.1016/j.matdes.2015.12.162 ↗
25. High temperature tensile properties of in situ TiBw/Ti6Al4V composites with a novel network reinforcement architecture10.1016/j.msea.2011.12.028 ↗
26. Achieving near equiaxed α-Ti grains and significantly improved plasticity via heat treatment of TiB reinforced titanium matrix composite manufactured by selective laser melting10.1016/j.jallcom.2020.155344 ↗
27. Microstructure evolution and mechanical properties of selective laser melted bulk-form titanium matrix nanocomposites with minor B4C additions10.1016/j.matdes.2019.108245 ↗
28. TiB nano-whiskers reinforced titanium matrix composites with novel nano-reticulated microstructure and high performance via composite powder by selective laser melting10.1016/j.msea.2020.140137 ↗
29. Microstructure evolution and mechanical properties of TIG cladded TiB reinforced composite coating on Ti-6Al-4V alloy10.1016/j.vacuum.2017.09.019 ↗
30. Review of electron beam welding technology in space environment10.1016/j.ijleo.2020.165720 ↗
31. Microstructure and mechanical properties of Ti-6Al-4V prepared by nickel preplating and electron beam surface remelting10.1016/j.jmatprotec.2019.04.017 ↗
32. Effect of electron beam remelting treatments on the performances of plasma sprayed zirconia coatings10.1016/j.jallcom.2018.05.004 ↗
33. The alloying elements dispersion and its mechanisms in a Ni-based superalloy during electron beam remelting10.1016/j.vacuum.2019.04.055 ↗
34. Reconstruction and refinement of TiB whiskers in titanium matrix composite after electron beam remelting10.1016/j.matlet.2018.04.099 ↗
35. Investigation on microstructure, mechanical and tribological properties of in-situ (TiB + TiC)/Ti composite during the electron beam surface melting10.1016/j.surfcoat.2018.01.054 ↗
36. Effects of reinforcement volume fraction on tensile behaviors of laminated Ti-TiBw/Ti composites10.1016/j.msea.2014.05.057 ↗
37. First principles determination of elastic constants and chemical bonding of titanium boride (TiB) on the basis of density functional theory10.1016/j.actamat.2005.12.003 ↗
38. L. Huang, L. Geng, Discontinuously Reinforced Titanium Matrix Composites, 2017. 〈https://doi.org/10.1007/978-981-10-4449-6〉.10.1007/978-981-10-4449-6 ↗
39. The influences of trace TiB and TiC on microstructure refinement and mechanical properties of in situ synthesized Ti matrix composite10.1016/j.compositesb.2012.01.075 ↗
40. Study on microstructure and properties of TiBw/Ti-V-Al light weight high temperature shape memory composite10.1016/j.jallcom.2020.156837 ↗
41. A review on heat treatment efficiency in metastable b titanium alloys: the role of treatment process and parameters10.1016/j.jmrt.2020.10.088 ↗
42. T. Velikanova, M. Turchanin, M. Materials Science International Team, The B-Ti binary system: datasheet from MSI Eureka in SpringerMaterials 〈https://materials.springer.com/msi/phase-diagram/docs/sm_msi_r_10_013136_01_full_LnkDia0〉, (n.d.). 〈https://materials.springer.com/msi/phase-diagram/docs/sm_msi_r_10_013136_01_full_LnkDia0〉.
43. Microsegregation of a new Ni-Co-based superalloy prepared through electron beam smelting and its homogenization treatment10.1016/j.jmrt.2020.03.068 ↗
44. The cleavage strength of polycrystals
45. The deformation and ageing of mild steel: II characteristics of the Lüders deformation10.1088/0370-1301/64/9/302 ↗
46. The deformation and ageing of mild steel: III discussion of results10.1088/0370-1301/64/9/303 ↗
47. Effect of aspect ratios of in situ formed TiB whiskers on the mechanical properties of TiB w/Ti-6Al-4V composites10.1016/j.scriptamat.2011.12.024 ↗
48. A variational approach to the theory of the elastic behaviour of polycrystals10.1016/0022-5096(62)90005-4 ↗
49. Microstructure and tribological behavior of in situ synthesized (TiB+TiC)/Ti6Al4V (TiB/TiC=1/1) composites10.1016/j.triboint.2020.106177 ↗
50. Microstructure evolution and mechanical properties of in-situ Ti6Al4V–TiB composites manufactured by selective laser melting10.1016/j.compositesb.2020.108567 ↗
51. Effects of heat treatment parameters on the microstructure and mechanical properties of in situ TiBw/Ti6Al4V composite with a network architecture10.1016/j.matdes.2011.12.021 ↗
52. Room temperature tensile fracture characteristics of in situ TiBw/Ti6Al4V composites with a quasi-continuous network architecture10.1016/j.scriptamat.2011.01.011 ↗
53. First principle calculations and low cost SLM processing of Ti–TiB composite materials10.1016/j.msea.2020.140711 ↗