Localized introduction of zirconium in P2 sodium layered oxide electrode for high capacity sodium-ion battery
Source abstract
Abstract
Abstract The Na0.67[Ni0.3Mn0.5Fe0.2]1-xZrxO2 (x = 0, 0.05, 0.075 and 0.1, respectively) materials composed of eco-friendly elements was synthesized via the sol-gel method. The X-ray diffraction (XRD) patterns demonstrated that all of the samples have a typical P2-type structure. The Na0.67[Ni0.3Mn0.5Fe0.2]0.95Zr0.05O2 exhibited the smaller lattice parameter a and b (a = b in P2 type), whereas the larger parameter c. The physical characterization of the materials showed that the Zr element was present in the form of zirconia and Zr doping. The pristine P2-Na0.67Ni0.3Mn0.5Fe0.2O2 delivers excellent electrochemical performance with an initial discharge specific capacity of 235.3 mA h g−1 (corresponding to 98.4% of the theoretical capacity) at a rate of 0.1 C between 1.5 and 4.3 V. The cycle performance of Na0.67[Ni0.3Mn0.5Fe0.2]0.95Zr0.05O2 is substantially improved compared with Zr free Na0.67Ni0.3Mn0.5Fe0.2O2, delivers a retention capacity increased from 40.5% to 56.2% after 100 cycles with 207.7 mA h g−1 in the 1st cycle. Combined with system analysis including the Transmission Electron Microscopy (TEM) and electrochemical methods, the better electrochemical performance can be attributed to the phase transformation suppression and the improvement of sodium diffusion kinetics brought about by the introduction of zirconium. The favorable Na storage performance of full cell with Na0.67[Ni0.3Mn0.5Fe0.2]0.95Zr0.05O2 cathode material paves the way for high capacity sodium-ion battery.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. A new P2–type layered oxide cathode with extremely high energy density for sodium‐Ion batteries10.1002/aenm.201803346 ↗
2. Exploration of advanced electrode materials for rechargeable sodium‐ion batteries
3. sodium and sodium-ion batteries: 50 years of research10.1002/aenm.201703137 ↗
4. Nanocomposite materials for the sodium-ion battery: a review10.1002/smll.201702514 ↗
5. Sodium-ion batteries: new opportunities beyond energy storage by lithium10.1016/j.jpowsour.2018.05.089 ↗
6. Polyfurfuryl alcohol assisted synthesis of Na2FePO4F/C nanocomposites as cathode material of sodium ion batteries10.1016/j.jelechem.2020.114187 ↗
7. Reversible structural evolution of sodium-rich rhombohedral Prussian blue for sodium-ion batteries10.1038/s41467-020-14444-4 ↗
8. Single-crystal FeFe(CN)6 nanoparticles: a high capacity and high rate cathode for Na-ion batteries10.1039/c3ta12036h ↗
9. Zr-doped P2-Na0.75Mn0.55Ni0.25Co0.05Fe0.10Zr0.05O2 as high-rate performance cathode material for sodium ion batteries10.1016/j.electacta.2016.12.019 ↗
10. Recent progress of P2-type layered transition-metal oxide cathodes for sodium-ion batteries10.1002/chem.201905131 ↗
11. Habit plane-driven P2-type manganese-based layered oxide as long cycling cathode for Na-ion batteries10.1016/j.jpowsour.2018.02.053 ↗
12. Nanometric P2-Na2/3Fe1/3Mn2/3O2 with controlled morphology as cathode for sodium-ion batteries10.1016/j.jallcom.2017.07.044 ↗
13. Synthesis of nanostructured P2-Na2/3MnO2 for high performance sodium-ion batteries10.1039/C9CC01215J ↗
14. Jahn–Teller assisted Na diffusion for high performance Na ion batteries10.1021/acs.chemmater.6b02440 ↗
15. Investigation of the NaNixMn1−xO2(0 ≤ x ≤ 1) system for Na-ion battery cathode materials10.1149/2.0551503jes ↗
16. A P2-type Na0.7(Ni0.6Co0.2Mn0.2)O2 cathode with excellent cyclability and rate capability for sodium ion batteries10.1039/C9CC05550A ↗
17. P2-type Na0.67Mn0.8Cu0.1Mg0.1O2 as a new cathode material for sodium-ion batteries: insights of the synergetic effects of multi-metal substitution and electrolyte optimization10.1016/j.jpowsour.2019.01.086 ↗
18. High-performance P2-type Fe/Mn-based oxide cathode materials for sodium-ion batteries10.1016/j.electacta.2019.04.183 ↗
19. Fe‐based tunnel‐type Na0.61[Mn0.27Fe0.34Ti0.39]O2 designed by a new strategy as a cathode material for sodium‐ion batteries10.1002/aenm.201501156 ↗
20. High‐performance P2–type Na2/3(Mn1/2Fe1/4Co1/4)O2 cathode material with superior rate capability for Na‐ion batteries10.1002/aenm.201500944 ↗
21. P2-type Na2/3Ni1/3Mn2/3−xTixO2 as a new positive electrode for higher energy Na-ion batteries10.1039/C3CC49856E ↗
22. High-performance P2-phase Na2/3Mn0.8Fe0.1Ti0.1O2 cathode material for ambient-temperature sodium-ion batteries10.1021/acs.chemmater.5b03276 ↗
23. P2-type Na0.67Mn0.65Fe0.2Ni0.15O2 cathode material with high-capacity for sodium-ion battery10.1016/j.electacta.2013.10.211 ↗
24. A rechargeable sodium-ion battery using a nanostructured Sb–C anode and P2-type layered Na0.6Ni0.22Fe0.11Mn0.66O2 cathode10.1039/C5RA06336A ↗
25. High performance Na0.5[Ni0.23Fe0.13Mn0.63]O2 cathode for sodium-Ion batteries
26. High-performance P2-Na0.70Mn0.80Co0.15Zr0.05O2 cathode for sodium-ion batteries10.1021/acsami.8b15693 ↗
27. A chemical approach to raise cell voltage and suppress phase transition in O3 sodium layered oxide electrodes10.1002/aenm.201702599 ↗
28. P2-type Na0.67Mn0.72Ni0.14Co0.14O2 with K+ doping as new high rate performance cathode material for sodium-ion batteries10.1016/j.electacta.2016.09.003 ↗
29. Synthesis and electrochemical behaviors of layered Na0.67[Mn0.65Co0.2Ni0.15]O2 microflakes as a stable cathode material for sodium-ion batteries10.1039/c3ta01430d ↗
30. Enhanced sodium ion storage behavior of P2-type Na2/3Fe1/2Mn1/2O2 synthesized via a chelating agent assisted route10.1021/acsami.5b11848 ↗
31. Identification and characterisation of high energy density P2-type Na2/3[Ni1/3−y/2Mn2/3−y/2Fey]O2 compounds for Na-ion batteries10.1039/C7TA09607K ↗
32. New insights into the roles of Mg in improving the rate capability and cycling stability of O3-NaMn0.48Ni0.2Fe0.3Mg0.02O2 for sodium-ion batteries10.1021/acsami.7b18226 ↗
33. Layered P2-type Na0.5Ni0.25Mn0.75O2 as a high performance cathode material for sodium-ion batteries10.1016/j.electacta.2016.04.138 ↗
34. A P2-Na0.67Co0.5Mn0.5O2 cathode material with excellent rate capability and cycling stability for sodium ion batteries10.1039/C6TA02845D ↗
35. Anionic redox activity in a newly Zn‐doped sodium layered oxide P2–Na2/3Mn1−yZnyO2 (0 < y < 0.23)
36. Enhanced sodium-ion storage capability of P2/O3 biphase by Li-ion substitution into P2-type Na0.5Fe0.5Mn0.5O2 layered cathode
37. Na[Ni0.4Fe0.2Mn0.4−xTix]O2: a cathode of high capacity and superior cyclability for Na-ion batteries10.1039/C4TA03828B ↗
38. Performance modulation through synergetic effect of interstitial water with Ti-substitution for sodium ion battery cathode10.1246/cl.190137 ↗
39. High-rate performance O3-NaNi0.4Mn0.4Cu0.1Ti0.1O2 as a cathode for sodium ion batteries10.1016/j.jallcom.2019.04.053 ↗
40. A new tin-based O3-Na0.9[Ni0.45−x/2MnSn0.55−x/2]O2 as sodium-ion battery cathode10.1016/j.jechem.2018.05.019 ↗
41. Ti-doped NaCrO2 as cathode materials for sodium-ion batteries with excellent long cycle life10.1016/j.jallcom.2018.11.257 ↗