Preparation and compression performance of porous magnesium alloy composite with ceramic hollow spheres
Source abstract
Abstract
Abstract Using two different ceramic hollow spheres (the commercial alumina hollow sphere and the self-made silicon-containing ceramic hollow sphere) as reinforcements, two kinds of lightweight porous magnesium alloy composite materials were successfully fabricated by sintering at 600 °C for 3 h 20 min. The microstructure of samples with the self-made silicon-containing ceramic hollow sphere reveals that an alloy phase containing MgO and Mg2Si was formed by an interfacial reaction at the interface between the magnesium alloy and the self-made ceramic hollow sphere. The formation of the alloy phase is beneficial to improve the mechanical properties of the sample. The influence of different types of ceramic hollow spheres on the apparent density, compressive strength, specific strength, energy absorption, and energy absorption efficiency was studied for these porous products. The results show that the apparent density of these two porous samples is markedly lower than that of the magnesium alloy. The Compression curves of both samples have the elastic stage, the yield platform, and the densification stage, which are the typical compression characteristics of porous materials. The compressive strength and specific strength of the samples made by self-made silicon-containing ceramic hollow spheres are both significantly higher than those made by commercial alumina hollow spheres. Moreover, the energy absorption performance of the sample made by self-made silicon-containing ceramic hollow spheres is better than that of the sample made by alumina hollow spheres. The higher energy absorption capacity and the wider strain range of maintaining the maximum energy absorption efficiency mean the sample made by self-made silicon-containing ceramic hollow spheres can absorb more energy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Cellular and Composite Structures · Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Metal matrix composite
2. Sosnick B. Process for making foam like mass of metal: US2434775. 1948-01-20.
3. Special review: Mechanical investigation on failure modes of reticular porous metal foams under different loadings in engineering applications10.1108/MMMS-11-2020-0279 ↗
4. Property relations based on the octahedral structure model with body-centered cubic mode for porous metal foams10.1016/j.matdes.2019.108413 ↗
5. Porous materials: processing and applications
6. Liu · 2019
7. Effect of CaCO3 content change on the production of closed-cell aluminum foam by selective laser melting10.1016/j.optlastec.2021.107097 ↗
8. Design and fabrication of highly porous replicated aluminum foam using double-granular space holder10.3390/ma14071619 ↗
9. An experimental investigation into the quasi-static compression behavior of open-cell aluminum foams focusing on controlling the space holder particle size10.1016/j.jmapro.2021.08.043 ↗
10. Initial yield behaviour of closed-cell aluminium foams in biaxial loading10.1016/j.ijmecsci.2020.106063 ↗
11. Preparation of foam magnesium and its performance and application
12. Preparation, properties and application of foamed Magnesium
13. Micro-arc oxidation coating on porous magnesium foam and its potential biomedical applications10.1016/j.surfcoat.2018.12.106 ↗
14. The influence of flow rates on the dynamic degradation behaviour of porous magnesium under a simulated environment of human cancellous bone10.1016/j.matdes.2017.03.029 ↗
15. Progress in research and application of foamed metals
16. Factors affecting the heat dissipation performance of LED magnesium alloy radiator
17. Simulation study on forced convection heat dissipation performance of foam magnesium radiator
18. Endogenous par-ticles stabilization during magnesium integral foam production10.1002/adem.200405147 ↗
19. Fabrication and characterization of closed-cell magnesium-based composite foams10.1016/j.matdes.2015.02.029 ↗
20. Vacuum foaming of magnesium slur-ries10.1002/adem.200400191 ↗
21. Processing of magnesium foams by weakly corrosive and highly flexible space holder materials10.1016/j.matdes.2014.07.049 ↗
22. Finite element analysis for mechanical response of magnesium foams with regular structure obtained by powder metallurgy method10.1016/j.proeng.2016.06.688 ↗
23. Processing and mechanical properties of magnesium foams10.1007/s10934-008-9194-y ↗
24. Multi-functionality of cellular metal systems10.1016/S0079-6425(98)00004-8 ↗
25. Production and bio-corrosion resistance of porous magnesium with hydroxyapatite coating for biomedical applications10.1016/j.matlet.2013.06.096 ↗
26. Effects of particle size on the microstructure and mechanical properties of expanded glass-metal syntactic foams10.1016/j.msea.2018.04.103 ↗
27. The effect of particle shape on mechanical properties of perlite/metal syntactic foam10.1016/j.jallcom.2016.09.168 ↗
28. Dynamic properties of silicon carbide hollow particle filled magnesium alloy (AZ91D) matrix syntactic foams10.1016/j.ijimpeng.2015.04.008 ↗
29. Synthesis and characterization of floatable magnesium alloy syntactic foams with hybridized cell morphology10.1016/j.matdes.2018.10.004 ↗
30. Chen J.H., Liu P.S., Sun J.X. The strength characterization method of ceramic hollow spheres. CN: CN201910312024.3, 2019.
31. Interfacial microstructure and compressive properties of Al-Mg syntactic foam reinforced with glass cenospheres10.1016/j.jallcom.2015.09.175 ↗
32. Effect of Si content on microstructure and compressive properties of open-cell Mg composite foams reinforced by in-situ Mg2Si compounds10.1016/j.matchar.2019.110045 ↗
33. Compressive behavior of Mg alloy foams at elevated temperature10.1016/j.jallcom.2019.04.323 ↗
34. Effects of cell size on quasi-static compressive properties of Mg alloy foams10.1016/j.matdes.2011.07.066 ↗
35. Gibson · 1997
36. Evaluation of cushioning properties of plastic foams from compressive measurements10.1002/pen.760211505 ↗