High entropy alloys and thermodynamically derived high stability alloys; a compositional comparative study of all 3–7 element systems composed of ten 3d metals at 1273 K
Source abstract
Abstract
Abstract Studies of high entropy or multi-principal element alloys are focused mainly on equimolar or near-equimolar compositions for which configurational entropy is maximized. Negligence of interactions between elements forming such alloys, namely enthalpy of mixing, may detract these studies from a desirable target, which is a stabilization of single-phases instead of intermetallic compounds. In this work, both entropy and enthalpy terms are taken into account for the determination of the high stability compositions, for which the Gibbs free energy of mixing is minimized. For the ten 3d metals (Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn and Al) all possible combinations forming 3- (120 compositions), 4- (210), 5- (252), 6- (210) and 7-component systems (120) are analyzed. Two numerical methods: a genetic algorithm (GA) and a hybrid one (a combination of GA with the gradient method) give convergent results regarding the high stability compositions at 1273 K (a typical temperature used on HEAs synthesis). It is found surprisingly that such compositions are dominated by the Ti and Al or Ni contents with minor ones of the seven remaining elements, especially for 6 and 7-component systems. These numbers can be related to average parameters of interaction (of a given element with the remaining ones) giving almost monotonic dependence; the lower the average value of the interaction parameter of a given element − the higher its content in the alloys of the high stability. Such selective preferences in compositions are reflected by high deviations between the high stability compositions and equimolar ones, with an average reaching 48% for ternary systems to 105% for 7-component alloys (expressed as normalized root mean square errors).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
2. Nanostructured nitride films of multi-element high-entropy alloys by reactive DC sputtering10.1016/j.surfcoat.2004.08.023 ↗
3. Wear resistance and high temperature compression strength of FCC CuCoNiCrAl0.5Fe alloy with boron addition10.1007/s11661-004-0254-x ↗
4. Multi-principal-element alloys with improved oxidation and wear resistance for thermal spray coating10.1002/adem.200300507 ↗
5. Formation of simple crystal structures in Cu-Co-Ni-Cr-Al-Fe-Ti-V alloys with multiprincipal metallic elements10.1007/s11661-006-0234-4 ↗
6. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
7. Recent progress in high entropy alloys10.3166/acsm.31.633-648 ↗
8. Refractory highentropy alloys10.1016/j.intermet.2010.05.014 ↗
9. Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys10.1016/j.intermet.2011.01.004 ↗
10. Exploration and development of high entropy alloys for structural applications10.3390/e16010494 ↗
11. From high entropy alloys to diluted multi-component alloys: range of existence of a solid-solution10.1016/j.matdes.2016.04.046 ↗
12. From diluted solid solutions to high entropy alloys: on the evolution of properties with composition of multi-component alloys10.1016/j.msea.2017.04.079 ↗
13. Annealing effect on the phase stability and mechanical properties of (FeNiCrMn)100-xCox high entropy alloys10.1016/j.jallcom.2016.11.376 ↗
14. Stacking fault energy of face-centred-cubic high entropy alloys10.1016/j.intermet.2017.10.004 ↗
15. On the influence of Mn on the phase stability of the CrMnxFeCoNi high entropy alloys10.1016/j.intermet.2017.09.011 ↗
16. Combining experiments and modelling to explore the solid solution strengthening of high and medium entropy alloys10.1016/j.actamat.2019.06.050 ↗
17. Effect of alloying elements on microstructure and properties of multiprincipal elements high-entropy alloys10.1016/j.jallcom.2008.07.124 ↗
18. Phase evolution and densification behavior of nanocrystalline multicomponent high entropy alloys during spark plasma sintering
19. Solid solutioning in equiatomic alloys: limit set by topological instability10.1016/j.jallcom.2013.08.213 ↗
20. On the formation of disordered solid solutions in multi-component alloys10.1016/j.jallcom.2013.10.133 ↗
21. Effect of alloying order on non-isothermal sintering kinetics of mechanically alloyed high entropy alloy powders10.1016/j.matlet.2018.01.092 ↗
22. Cryogenic-deformation-induced phase transformation in a FeCoCrNi high-entropy alloy10.1080/21663831.2018.1434250 ↗
23. Effect of elemental interaction on microstructure of CuCrFeNiMn high entropy alloy system10.1016/j.jallcom.2009.12.183 ↗
24. Evolution of microstructure, hardness and corrosion properties of high entropy Al0.5CoCrFeNi alloy10.1016/j.intermet.2010.10.008 ↗
25. Processing effects on the magnetic and mechanical properties of FeCoNiAl0.2 Si0.2 high entropy alloy10.1007/s12613-013-0764-x ↗
26. A successful synthesis of the CoCrFeNiAl0.3 single-crystal high-entropy alloy by Bridgman solidification
27. Precipitation strengthening of ductile CrFeCoNiMo alloys10.1016/j.scriptamat.2017.05.019 ↗
28. Phase composition of AlxFeNiCrCo high entropy alloys by sintering and arc-melting methods10.1016/j.jallcom.2017.12.333 ↗
29. Laser brazing of a nickel-based superalloy using a NiMnFeCoCu high entropy filler material10.1016/j.matlet.2017.12.003 ↗
30. Tribological behaviour of the double FeCoNiCrCux middle entropy alloy coatings10.1080/02670844.2018.1444548 ↗
31. A critical review of high-entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
32. Murty · 2019
33. Multicomponent high-entropy Cantor alloys10.1016/j.pmatsci.2020.100754 ↗
34. High hardness and fatigue resistance of CoCrFeMnNi high entropy alloy films with ultrahigh-density nanotwins10.1016/j.ijplas.2020.102726 ↗
35. Fundamental electronic structure and multiatomic bonding in 13 biocompatible high-entropy alloys
36. Microstructures and properties of high-entropy alloys10.1016/j.pmatsci.2013.10.001 ↗
37. Swallin · 1962
38. Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element10.2320/matertrans.46.2817 ↗
39. Mitchell · 1999
40. 〈https://nl.mathworks.com/help/optim/ug/fmincon.html〉.
41. Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys10.1063/1.3587228 ↗