Spheroidization behavior of (TiB+TiC+Y2O3)/α-Ti alloy during annealing
Source abstract
Abstract
Abstract In present study, the microstructure evolution and spheroidization behavior of (TiB+TiC+Y2O3)/α-Ti composite annealed at various temperatures and times were investigated. Results show that the volume fraction of αp is characteristic of S-type curve with the largest change rate in the range of 960–980 ℃. The mean length of αp lamellar is characteristic of Doseresp function, that is, the change rate decreases gradually as temperature increases. In the early stage of annealing, the spheroidization mechanism is associated with boundary splitting, which is controlled by the density of defects. When the heat treatment is prolonged, the spheroidization is completed by termination migration and Ostwald ripening. Owing to the heterogeneous geometrical orientation, crystallographic orientation, and (TiB+TiC+Y2O3), the spheroidization behavior is heterogeneous that is demonstrated by different spheroidization response of kinked and elongated α colonies. A positive spheroidization behavior is observed in particle-rich region, while a relatively negative spheroidization behavior is observed in particle lean region. The reinforcements hindered the dislocations movement and promoted spheroidization, thus, leading to the heterogeneous deformation and spheroidization. Furthermore, it could promote non-uniform nucleation to form remarkable random αs and αp texture, which gave a new inspiration to avoid “Macrozone”.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Advanced materials and composites · Orthopaedic implants and arthroplasty
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Thermomechanical processing of alpha titanium alloys—an overview10.1016/S0921-5093(98)01155-1 ↗
2. Influence of processing on microstructure and mechanical properties of (α+β) titanium alloys10.1016/S0921-5093(97)00778-8 ↗
3. Slip transfer and deformation structures resulting from the low cycle fatigue of near-alpha titanium alloy Ti-6242Si10.1016/j.ijplas.2017.09.012 ↗
4. Texture heterogeneities induced by subtransus processing of near α titanium alloys10.1016/j.actamat.2008.04.065 ↗
5. Texture and microtexture variations in a near-α titanium forged disk of bimodal microstructure10.1016/j.actamat.2012.01.031 ↗
6. Spheroidization of the lamellar microstructure in Ti–6Al–4V alloy during warm deformation and annealing10.1016/j.actamat.2011.03.037 ↗
7. Modification of alpha morphology in Ti-6Al-4V by thermomechanical processing10.1007/BF02644991 ↗
8. Mechanisms of globularization of Ti-6Al-4V during static heat treatment10.1007/s11661-003-0103-3 ↗
9. Coarsening behavior of an alpha-beta titanium alloy10.1007/s11661-004-0228-z ↗
10. Prediction of the kinetics of static globularization of Ti-6Al-4V10.1007/s11661-005-0229-6 ↗
11. Deformation behavior and microstructure evolution of titanium alloys with lamellar microstructure in hot working process: a review10.1016/j.jmst.2019.07.052 ↗
12. Flow behavior and globularization kinetics during hot working of Ti–6Al–4V with a colony alpha microstructure10.1016/S0921-5093(98)01156-3 ↗
13. Evolution of equiaxed and lamellar α during hot compression in a near alpha titanium alloy with bimodal microstructure10.1016/j.matchar.2019.03.005 ↗
14. In situ observation of texture and microstructure evolution during rolling and globularization of Ti–6Al–4V10.1016/j.actamat.2012.11.037 ↗
15. Collaborative behavior in α lamellae and β phase evolution and its effect on the globularization of TC17 alloy10.1016/j.matdes.2018.03.020 ↗
16. Orientation dependent spheroidization response and macro-zone formation during sub β-transus processing of Ti-6Al-4V alloy10.1016/j.actamat.2017.04.071 ↗
17. Unique texture transition during sub β-transus annealing of warm-rolled Ti-6Al-4V alloy: Role of orientation dependent spheroidization10.1016/j.scriptamat.2018.05.005 ↗
18. SEM/EBSD analysis on globularization behavior of lamellar microstructure in Ti-6Al-4V during hot deformation and annealing10.1007/s11661-017-4180-0 ↗
19. Microstructure and texture evolution during sub-transus thermo-mechanical processing of Ti-6Al-4V-0.1B alloy: part II. static annealing in (α+β) regime10.1007/s11661-013-1673-3 ↗
20. Deformation behavior and microstructure evolution mechanism of 5vol% (TiBw + TiCp)/Ti composites during isothermal compression10.1016/j.matchar.2019.06.002 ↗
21. Microstructure evolution during forging deformation of (TiB+TiC+Y2O3)/α-Ti composite: DRX and globularization behavior10.1016/j.jallcom.2020.154170 ↗
22. TiB whiskers stimulated the dynamic recrystallization behavior10.1016/j.jallcom.2019.152152 ↗
23. Reinforcements stimulated dynamic recrystallization behavior and tensile properties of extruded (TiB+TiC+La2O3)/Ti6Al4V composites10.1016/j.jallcom.2016.12.418 ↗
24. Effect of reinforcements on β→α transformation and tensile properties of a near α titanium matrix composite10.1016/j.msea.2019.138337 ↗
25. Effects of nano-Y2O3 addition on the microstructure evolution and tensile properties of a near-α titanium alloy10.1016/j.msea.2019.05.107 ↗
26. The origins of heterogeneous deformation during primary hot working of Ti–6Al–4V10.1016/S0749-6419(01)00057-2 ↗
27. The kinetics of static globularization of Ti-6Al-4V10.1007/s11661-002-0340-x ↗
28. Mechanism and kinetics of static globularization in TA15 titanium alloy with transformed structure10.1016/j.jallcom.2012.03.113 ↗
29. Deformation behavior and microstructure evolution during hot working of Ti60 alloy with lamellar starting microstructure10.1016/j.jallcom.2019.03.345 ↗
30. Static globularization mechanism of Ti-17 alloy during heat treatment10.1016/j.jallcom.2017.11.117 ↗
31. Analysis of globularization modeling and mechanisms of alpha/beta titanium alloy10.1016/j.jallcom.2019.02.205 ↗
32. Static coarsening behavior of the lamellar alpha in Ti-17 alloy10.1016/j.jallcom.2015.01.106 ↗
33. Static globularization kinetics for Ti-17 alloy with initial lamellar microstructure10.1016/j.jallcom.2014.03.082 ↗
34. Microstructure coarsening behavior of Ti-17 alloy with equiaxed alpha during heat treatment10.1016/j.jallcom.2014.08.223 ↗
35. Mechanisms and kinetics of static spheroidization of hot-worked Ti-6Al-2Sn-4Zr-2Mo-0.1Si with a lamellar microstructure10.1007/s11661-011-1019-y ↗
36. Modeling the anisotropy of hot plastic deformation of two-phase titanium alloys with a colony microstructure10.1016/j.ijplas.2018.02.010 ↗
37. Perspectives on titanium science and technology10.1016/j.actamat.2012.10.043 ↗
38. Microstructure evolution during warm working of Ti–6Al–4V with a colony-α microstructure10.1016/j.actamat.2009.02.016 ↗
39. Acceleration of globularization during interrupted compression of a two-phase titanium alloy10.1016/j.msea.2018.02.026 ↗
40. Strengthened flow instability in hot deformation of titanium alloy with colony structure: On the effect of microstructure heterogeneity10.1016/j.jallcom.2019.05.179 ↗
41. The heterogeneous globularization related to crystal and geometrical orientation of two-phase titanium alloys with a colony microstructure10.1016/j.matdes.2019.108338 ↗
42. Deformation behavior and softening mechanism of TiB reinforced near-α titanium matrix composite during hot compression10.1016/j.jmrt.2020.09.030 ↗
43. Microstructure and texture evolution during sub-transus thermomechanical processing of Ti-6Al-4V-0.1B alloy: Part I. hot rolling in (α+β) phase field10.1007/s11661-013-1672-4 ↗
44. Effect of heat treatment on the crystallographic orientation evolution in a near-α titanium alloy Ti6010.1016/j.actamat.2017.04.007 ↗
45. Effect of β (110) texture intensity on α-variant selection and microstructure morphology during β→α phase transformation in near α titanium alloy10.1016/j.actamat.2016.12.069 ↗
46. Development of solidification microstructure in boron-modified alloy Ti–6Al–4V–0.1B10.1016/j.actamat.2011.05.023 ↗