journal article·2021-12Open access

Multimodal analysis of spatially heterogeneous microstructural refinement and softening mechanisms in three-pass friction stir processed Al-4Si alloy

Julian Escobar, Bharat Gwalani, Matthew Olszta, Joshua Silverstein, Nicole Overman, Luciano Bergmann, Jorge F. dos Santos, Peter Staron, Emad Maawad, Benjamin Klusemann, Suveen Mathaudhu, Arun Devaraj

Abstract

Abstract Solid phase processing methods such as friction stir processing (FSP) offer pathways to refine the microstructure of metallic alloys through the combined action of deformation and deformation-induced heating. However, this thermomechanical coupling during FSP also leads to the occurrence of multiple competing microstructural evolution mechanisms which in turn can lead to locally varying mechanical properties, often distributed heterogeneously in the microstructure. This inherent microstructural and mechanical property heterogeneity in alloys subjected to FSP makes it rather challenging to reveal the microstructure-mechanical property relationships systematically. Therefore in this work, we systematically analyze the relationship between microstructural evolution and local microhardness in a model binary Al-4 at.% Si alloy subjected to three-pass friction stir processing. Spatially resolved high-energy synchrotron X-ray diffraction, electron backscattered diffraction, and scanning transmission electron microscopy were used to understand the heterogeneous microstructural evolution due to the FSP. Our results provide insight into how particle-stimulated grain nucleation, recovery, and recrystallization occur heterogeneously in the Al-Si alloy as a function of the distance from the stir zone, directly influencing the degree of softening. The systematic understanding developed by this work can guide future studies on the influence of FSP process parameters on the microstructural evolution mechanisms and its influence on local mechanical properties
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (63)

Show source-provided references
1. Ultra-grain refinement and enhanced low-temperature superplasticity in a friction stir-processed Ti-6Al-4V alloy10.1016/j.msea.2018.03.009 ↗
2. Grain refinement in an Al-Mg-Sc alloy: equal channel angular pressing versus friction-stir processing10.1016/j.msea.2016.08.021 ↗
3. Effect of grain size refinement and precipitation reactions on strengthening in friction stir processed Al-Cu alloys10.1016/j.scriptamat.2011.09.009 ↗
4. Microstructural progression of shear-induced mixing in a CuNi alloy10.1016/j.matchar.2020.110759 ↗
5. Ultrafine-grained Al-Mg-Zr alloy processed by shear-assisted extrusion with high thermal stability10.1016/j.scriptamat.2020.05.051 ↗
6. Enhanced strength and ductility in a friction stir processing engineered dual phase high entropy alloy
7. High strength and ductility of friction-stir-welded steel joints due to mechanically stabilized metastable austenite10.1016/j.scriptamat.2013.09.012 ↗
8. Paradox of strength and ductility in metals processed by severe plastic deformation10.1557/JMR.2002.0002 ↗
9. Dislocation structure and deformation in iron processed by equal-channel-angular pressing10.1007/s11661-004-0309-z ↗
10. On the effect of SPD on recycled experimental aluminium alloys: Nanostructures, particle break-up and properties10.1016/j.msea.2005.08.051 ↗
11. Effect of ECAP on microstructure and tensile properties of A390 aluminum alloy10.1016/S1003-6326(19)65002-8 ↗
12. Friction stir welding and processing10.1016/j.mser.2005.07.001 ↗
13. Friction stir based welding and processing technologies - processes, parameters, microstructures and applications: a review10.1016/j.jmst.2017.11.029 ↗
14. Metallurgy and design of alloys with hierarchical
15. Effect of friction stir processing on the microstructure of cast A356 aluminum10.1016/j.msea.2006.06.099 ↗
16. Effect of friction stir processing on fatigue behavior of an investment cast Al-7Si-0.6 Mg alloy10.1016/j.actamat.2009.10.015 ↗
17. Microstructure and mechanical properties of friction stir welded joints of AC4A cast aluminium alloy10.1179/026708304225012279 ↗
18. Recent advances in friction-stir welding - Process, weldment structure and properties10.1016/j.pmatsci.2008.05.001 ↗
19. Comparison of appearance, microstructure and tensile properties during friction stir welding processes of Al-Si alloys10.1134/S0031918X17070092 ↗
20. Microstructural modification of as-cast Al-Si-Mg alloy by friction stir processing10.1007/BF02586167 ↗
21. Effects of friction stir processing on mechanical properties of the cast aluminum alloys A319 and A35610.1016/j.scriptamat.2005.03.040 ↗
22. Effect of tool pin profile on the microstructure and mechanical properties of friction stir processed Al6061/Al2O3—TiB2 surface hybrid composite layer
23. Friction stir welding of a hypoeutectic Al-Si alloy: microstructural, mechanical, and cyclic response10.1007/s00170-018-3146-8 ↗
24. On the role of process variables in the friction stir processing of cast aluminum A319 alloy10.1016/j.matdes.2009.08.001 ↗
25. The influence of multi-pass friction stir processing on the microstructural and mechanical properties of aluminum alloy 608210.1016/j.jmatprotec.2011.12.017 ↗
26. Multipass friction-stir processing and its effect on mechanical properties of aluminum alloy 508610.1007/s11661-012-1232-3 ↗
27. Effect of overlapping direction in multipass friction stir processing10.1016/j.msea.2011.03.105 ↗
28. Improvement of mechanical properties of aluminum die casting alloy by multi-pass friction stir processing10.1016/j.msea.2006.07.150 ↗
29. Friction stir processing of large-area bulk UFG aluminum alloys10.1016/j.scriptamat.2004.09.014 ↗
30. Microstructural characterization and corrosion behavior of multipass friction stir processed AA2219 aluminium alloy10.1016/j.surfcoat.2008.02.001 ↗
31. Microstructure and mechanical properties of multi-pass friction stir processed aluminum alloy 606310.1016/j.matdes.2013.07.062 ↗
32. Effect of multipass friction stir processing on corrosion resistance of hypereutectic Al–30Si alloy10.1016/j.corsci.2014.02.013 ↗
33. Ductilizing of a brittle as-cast hypereutectic Al–Si alloy by friction stir processing10.1016/j.matlet.2015.07.006 ↗
34. Understanding precipitate evolution during friction stir welding of Al-Zn-Mg-Cu alloy through in-situ measurement coupled with simulation10.1016/j.actamat.2018.01.020 ↗
35. Grain detection from 2d and 3d EBSD data-Specification of the MTEX algorithm10.1016/j.ultramic.2011.08.002 ↗
36. Quantifying recrystallization by electron backscatter diffraction10.1111/j.0022-2720.2004.01296.x ↗
37. A critical assessment of experimental investigation of dynamic recrystallization of metallic materials10.1016/j.matdes.2020.108873 ↗
38. Fine-grained alloys by thermomechanical processing10.1016/S1359-0286(00)00020-6 ↗
39. Humphreys · 2004
40. Mohammad · 2014
41. Effect of stacking fault energy on the grain structure evolution of FCC metals during friction stir welding10.1007/s40195-020-01064-6 ↗
42. Development of grain structure during friction stir welding10.1016/j.scriptamat.2004.04.017 ↗
43. Stored energy and flow stress in deformed metals10.1080/14786436108238377 ↗
44. Modeling recrystallization10.1179/mst.1990.6.11.1093 ↗
45. The deformation and recrystallization of particle-containing {011}[100]aluminium crystals10.1016/1359-6454(95)00432-7 ↗
46. The annealing behavior of deformed particle-containing aluminum single-crystals10.1016/0956-7151(94)90273-9 ↗
47. Local lattice rotations at 2nd phase particles in deformed10.1016/0001-6160(79)90071-3 ↗
48. A unified theory of recovery, recrystallization and grain growth, based on the stability and growth of cellular microstructures.2
49. The application of EBSD to the study of substructural development in a cold rolled single-phase aluminium alloy10.1016/S1359-6454(02)00513-X ↗
50. The application of a hot deformation SEM stage, backscattered electron imaging and EBSD to the study of thermomechanical processing10.1046/j.1365-2818.2002.01061.x ↗
51. Production of ultra-fine grain microstructures in Al-Mg alloys by coventional rolling10.1016/S1359-6454(02)00253-7 ↗
52. Subgrain growth in heavily deformed aluminum-experimental investigation and modeling treatment10.1016/0956-7151(94)00410-2 ↗
53. Transient dynamic recrystallization in an aluminium alloy subjected to large reductions in strain rate10.1016/S1359-6454(97)00140-7 ↗
54. Recrystallization in commercially pure aluminum10.1007/BF02645114 ↗
55. Investigation of the deformation and recrystallization of particle-containing aluminum silicon alloys10.1155/TSM.20.125 ↗
56. The effect of particle stimulated nucleation on the recrystallization texture of an Al-Si alloy10.1016/0956-716X(94)90200-3 ↗
57. The nucleation of recrystallization at second phase particles in deformed aluminium10.1016/0001-6160(77)90109-2 ↗
58. Development of dynamic recrystallization theory10.1016/j.msea.2004.01.064 ↗
59. Welding defects at friction stir welding
60. Mishra · 2014
61. The structure of deformed aluminium and its recrystallization - investigations with transmission kossel diffraction10.1016/0001-6160(77)90192-4 ↗
62. A comparative study on the microstructure development of friction stir welded 304 austenitic, 430 ferritic, and 2205 duplex stainless steels10.1016/j.matchemphys.2019.121833 ↗
63. Applications of electron backscattered diffraction to studies of annealing of deformed metals10.1179/mst.1997.13.1.85 ↗