Tailored ductility and strength for enhanced impact toughness of laser powder fusion built Alloy 718
Source abstract
Abstract
Impact toughness of Alloy 718 built via laser powder bed fusion (LPBF) in as-built and thermally post-treated conditions were investigated. The effect of various stages in the thermal post-treatment, including stress relief, hot isostatic pressing, solution treatment, and aging on the microstructure, texture, ductility, hardness, and impact toughness were studied. The greatest impact toughness was found in the as-built Alloy 718 material, associated with the high ductility of the material. The ductility results were also inversely related to the hardness of the investigated materials. Where the material with the highest ductility had the lowest hardness etc. Anisotropy in the impact toughness behavior was present in the as-built and post-heat treated specimens, which was explained by the presence of texture in all of the investigated material. With the applied heat treatments, recrystallization occurred and the preferential crystal orientations were randomized, decreasing the texture. The thermal post-treating conditions rendered different types of microstructures, with various grain sizes. The carbide content remained the same for the three investigated thermal post-treating conditions.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Physical metallurgy of alloy 71810.21236/AD0466476 ↗
2. The physical metallurgy of nickel and its alloys10.1017/CBO9780511541285.004 ↗
3. Donachie · 2002
4. The effect of heat treatment on microfissuring in alloy 718
5. D.F. Paulonis J.M. Oblak D.S. Duvall, Precipitation in nickel-base alloy, 718e, 1969.
6. Gamma double prime precipitation kinetic in Alloy 71810.1016/j.msea.2007.08.046 ↗
7. Strengthening mechanisms in Inconel 718 superalloy10.1179/030634583790421032 ↗
8. Morphology and lattice constants of γ″ precipitates in a Ni–18Cr–16Fe–5Nb–3Mo alloy10.2320/matertrans1989.37.1050 ↗
9. Sims CH., T.–Stoloff, NS–Hagel, WC: Superalloys II, 1987.
10. The effect of varying AI, Ti, and Nb content on the phase stability of INCONEL 71810.1007/BF02645133 ↗
11. Geddes · 2010
12. Neikter · 2019
13. Microstructural characterization of binary microstructure pattern in selective laser-melted Ti-6Al-4V10.1007/s00170-019-04002-8 ↗
14. Effect of heat treatment on the microstructure and mechanical properties of Inconel 718 processed by selective laser melting10.1016/j.msea.2015.05.035 ↗
15. Microstructure and hardness studies of Inconel 718 manufactured by selective laser melting before and after solution heat treatment10.1016/j.msea.2017.02.062 ↗
16. On the microstructural and mechanical properties of post-treated additively manufactured Inconel 718 superalloy under quasi-static and cyclic loading10.1016/j.msea.2016.05.089 ↗
17. Low cycle fatigue behavior of direct metal laser sintered Inconel alloy 71810.1016/j.ijfatigue.2016.08.019 ↗
18. Defect characterization of electron beam melted Ti-6Al-4V and Alloy 718 with X-ray microtomography
19. Microstructure and mechanical properties of Inconel 718 produced by selective laser melting: sample orientation dependence and effects of post heat treatments10.1016/j.msea.2017.12.043 ↗
20. Microstructures and mechanical behavior of Inconel 718 fabricated by selective laser melting10.1016/j.actamat.2011.12.032 ↗
21. Microstructure and mechanical behavior of direct metal laser sintered Inconel alloy 71810.1016/j.matchar.2016.01.003 ↗
22. The effect of interdendritic δ phase on the mechanical properties of Alloy 718 built up by additive manufacturing10.1016/j.matdes.2016.12.026 ↗
23. Effect of standard heat treatment on the microstructure and mechanical properties of selective laser melting manufactured Inconel 718 superalloy10.1016/j.msea.2015.06.021 ↗
24. Hot isostatic pressing of IN718 components manufactured by selective laser melting
25. Influences of hot-isostatic-pressing temperature on microstructure, tensile properties and tensile fracture mode of Inconel 718 powder compact10.1016/j.msea.2014.01.095 ↗
26. Microstructure, fatigue, and impact toughness properties of additively manufactured nickel alloy 718
27. Residual stress determination by neutron diffraction in powder bed fusion-built Alloy 718: influence of process parameters and post-treatment10.1016/j.matdes.2020.109045 ↗
28. Effect of different heat treatments on the microstructure and mechanical properties in selective laser melted INCONEL 718 alloy10.1080/10426914.2016.1257805 ↗
29. Microstructure and mechanical properties of Inconel 718 electron beam welds10.1179/174328405X62260 ↗
30. Correlation of yield strength and tensile strength with hardness for steels10.1007/s11665-008-9225-5 ↗
31. The effect of δ phase on the mechanical properties of an Inconel 718 superalloy10.1007/s11665-012-0433-7 ↗
32. Influence of grain size on the mechanical behaviour of some high strength materials10.1007/BF00547918 ↗
33. Modes of grain growth and mechanism of dislocation reaction under applied biaxial strain: atomistic and continuum modeling10.1016/j.jmst.2020.01.030 ↗
34. Young’s modulus surface and Poisson’s ratio curve for cubic metals10.1016/j.jpcs.2007.01.025 ↗