journal article·2021-12

Se-induced enhancement of the high-temperature thermoelectric performance of n-type Cu0.008Bi2(Te,Se)3 alloys due to suppressed bipolar conduction

Seungki Jo, Hyun-Sik Kim, Yurian Kim, Sang-il Kim, Kyu Hyoung Lee

Publisher page

Abstract

Abstract Bipolar conduction in Bi-Te-based alloys is a critical barrier to high conversion efficiency in thermoelectric power generation applications. Herein, we investigate the effect of Te/Se ratio control on bipolar conduction in n-type Cu0.008Bi2(Te,Se)3. Based on the two-band model and Callaway model, we found that electronic and thermal transports of minority carriers (holes) were gradually decreased with an increase in Se content. The high-temperature power factor of Se-rich Cu0.008Bi2Te2.1Se0.9 was higher in value compared to reference Cu0.008Bi2Te2.7Se0.3 due to the weighted mobility ratio increase, and its bipolar thermal conductivity was significantly reduced simultaneously. As a result, a peak figure of merit (zT) of 0.92 was obtained at 440 K in Cu0.008Bi2Te2.1Se0.9.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal properties of materials · Thermal Radiation and Cooling Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Cooling, heating, generating power, and recovering waste heat with thermoelectric systems10.1126/science.1158899 ↗
2. Complex thermoelectric materials10.1038/nmat2090 ↗
3. Important role of Cu in suppressing bipolar conduction in Bi-rich (Bi,Sb)2Te310.1016/j.scriptamat.2020.05.039 ↗
4. Enhanced thermoelectric performance in n-type Bi2Te3-based alloys via suppressing intrinsic excitation10.1021/acsami.8b06533 ↗
5. Shifting up the optimum figure of merit of p-type bismuth telluride-based thermoelectric materials for power generation by suppressing intrinsic conduction10.1038/am.2013.86 ↗
6. Improved carrier transport properties by I-doping in n-type Cu0.008Bi2Te2.7Se.0.3 thermoelectric alloys10.1016/j.scriptamat.2020.04.030 ↗
7. Fundamental and progress of Bi2Te3-based thermoelectric materials10.1088/1674-1056/27/4/048403 ↗
8. High thermoelectric performance of melt-spun CuxBi0.5Sb1.5Te3 by synergetic effect of carrier tuning and phonon engineering10.1016/j.actamat.2018.07.067 ↗
9. Significantly enhanced thermoelectric performance of Cu-doped p-type Bi0.5Sb1.5Te3 by hydrothermal synthesis method10.1039/C7RA06277J ↗
10. Conductivity-limiting bipolar thermal conductivity in semiconductors10.1038/srep10136 ↗
11. The optical properties of p-type Bi2Te3-Sb2Te3 alloys between 2-15 microns10.1016/0022-3697(62)90169-5 ↗
12. Band structure of bismuth telluride, bismuth selenide and their respective alloys10.1016/0022-3697(65)90092-2 ↗
13. n-Type Bi2Te3−xSex nanoplates with enhanced thermoelectric efficiency driven by wide-frequency phonon scatterings and synergistic carrier scatterings10.1021/acsnano.6b01156 ↗
14. Thermoelectric performance enhancement in n-type Bi2(TeSe)3 alloys owing to nanoscale inhomogeneity combined with a spark plasma-textured microstructure10.1038/am.2016.67 ↗
15. Enhanced thermoelectric properties of solution grown Bi2Te3−xSex nanoplatelet composites10.1021/nl2034859 ↗
16. Thermoelectric property studies on Cu-doped n-type CuxBi2Te2.7Se0.310.1002/aenm.201100149 ↗
17. 2012
18. The thermoelectric properties of n-type bismuth telluride: bismuth selenide alloys Bi2Te3−xSex10.34133/2020/4361703 ↗
19. The thermoelectric properties of bismuth telluride10.1002/aelm.201800904 ↗
20. Characterization of Lorenz number with Seebeck coefficient measurement10.1063/1.4908244 ↗
21. Estimation of the thermal band gap of a semiconductor from Seebeck measurements10.1007/s11664-999-0211-y ↗
22. Model for lattice thermal conductivity at low temperatures10.1103/PhysRev.113.1046 ↗