Amorphous Sn–Ni islets with high structural integrity as an anode material for lithium-ion storage
Source abstract
Abstract
Abstract To the best of our knowledge, the study described herein is the first to demonstrate the use of amorphous Sn–Ni islets as an anode material for lithium-ion storage. The islets are prepared by co-electrodeposition (2 s). In general, amorphous Sn–metal alloys exhibit significantly improved cycling performances over those of crystalline alloys with similar compositions and morphologies. However, to date, no thermodynamically metastable amorphous phase has been found in Sn–Ni alloys of any composition. Here, we show that the amorphization of such alloys is possible by ensuring rapid co-electrodeposition, so as to prevent Sn and Ni from crystallizing. The resulting amorphous Sn–Ni alloy affords suppressed capacity degradation due to the preservation of its initial microislet-shaped particles and its structural integrity after cycling. This is primarily due to the volume changes in the amorphous phase being small. These findings indicate the potential of this newly developed amorphous Sn–Ni alloy to be used as an anode material for lithium-ion rechargeable batteries.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Building better batteries10.1038/451652a ↗
2. The lithium-ion battery: state of the art and future perspectives10.1016/j.rser.2018.03.002 ↗
3. A review on the key issues for lithium-ion battery management in electric vehicles10.1016/j.jpowsour.2012.10.060 ↗
4. Rational material design for ultrafast rechargeable lithium-ion batteries10.1039/C4CS00442F ↗
5. Alloy negative electrodes for Li-ion batteries10.1021/cr500207g ↗
6. Tin-based materials as versatile anodes for alkali (earth)-ion batteries10.1016/j.jpowsour.2018.05.063 ↗
7. Tin-based nanomaterials: colloidal synthesis and battery applications10.1039/C9CC02811K ↗
8. A conductive binder for high-performance Sn electrodes in lithium-ion batteries10.1021/acsami.7b13692 ↗
9. Encapsulating Sn nanoparticles in amorphous carbon nanotubes for enhanced lithium storage properties10.1002/aenm.201601177 ↗
10. Facile synthesis of highly porous Ni-Sn intermetallic microcages with excellent electrochemical performance for lithium and sodium storage10.1021/nl5028606 ↗
11. High capacity 3D structured tin-based electroplated Li-ion battery anodes10.1016/j.ensm.2018.11.017 ↗
12. Novel three dimensional hierarchical porous Sn-Ni alloys as anode for lithium ion batteries with long cycle life by pulse electrodeposition10.1016/j.cej.2018.06.031 ↗
13. One-step synthesis of Ni3Sn2@reduced graphene oxide composite with enhanced electrochemical lithium storage properties10.1016/j.electacta.2016.01.204 ↗
14. Sn@Ni3Sn4 embedded nanocable-like carbon hybrids for stable lithium-ion batteries10.1039/C5CC06123G ↗
15. Ultrasmall Sn nanoparticles embedded in nitrogen-doped porous carbon as high-performance anode for lithium-ion batteries10.1021/nl403631h ↗
16. Pyrolysis of cyano-bridged hetero-metallic aerogels: a general route to immobilize Sn-M (M = Fe, Ni) alloys within a carbon matrix for stable and fast lithium storage10.1039/C7NR06768B ↗
17. Tin/tin antimonide alloy nanoparticles embedded in electrospun porous carbon fibers as anode materials for lithium-ion batteries10.1007/s10853-019-03539-z ↗
18. Carbon nanofibers with highly dispersed tin and tin antimonide nanoparticles: preparation via electrospinning and application as the anode materials for lithium-ion batteries10.1016/j.jpowsour.2018.02.004 ↗
19. Metallic Sn-based anode materials: application in high-performance lithium-ion and sodium-ion batteries10.1002/advs.201700298 ↗
20. Combinatorial study of tin-transition metal alloys as negative electrodes for lithium-ion batteries10.1149/1.2257985 ↗
21. Study on Sn–Co alloy anodes for lithium secondary batteries10.1149/1.2205156 ↗
22. Sn–Ca amorphous alloy as anode for lithium ion battery
23. Application of Sn-Ni alloy as an anode for lithium-ion capacitors with improved volumetric energy and power density10.1149/2.0661915jes ↗
24. Determination of solid–liquid interfacial energy of Ni3Sn2 phase by grain boundary groove method in a temperature gradient10.1016/j.jallcom.2018.12.301 ↗
25. Ni-Sn-based hybrid composite anodes for high-performance lithium-ion batteries10.1016/j.electacta.2018.05.022 ↗
26. Traditional electrodeposition preparation of nonstoichiometric tin-based anodes with superior lithium-ion storage10.1021/acsomega.8b03535 ↗
27. Synthesis of Ni@NiSn composite with high lithium-ion diffusion coefficient for fast-charging lithium-ion batteries
28. 3D scaffolded nickel-tin Li-ion anodes with enhanced cyclability10.1002/adma.201504780 ↗
29. Electrodeposited Ni–Sn intermetallic electrodes for advanced lithium ion batteries10.1016/j.jpowsour.2006.02.068 ↗
30. Microstructure evolution of novel Sn islands prepared by electrodeposition as anode materials for lithium rechargeable batteries10.1039/C7RA04959E ↗
31. Nanostructured Ni3Sn2 thin film as anodes for thin film rechargeable lithium batteries10.1016/S0167-2738(03)00185-1 ↗