journal article·2021-08

Microstructure and tensile properties of duplex phase Al0.25FeMnNiCrCu0.5 high entropy alloy fabricated by laser melting deposition

Thanhung Nguyen, Ming Huang, Hongjun Li, Vannghia Tran, Sen Yang

Publisher page

Abstract

Abstract Duplex phase Al0.25FeMnNiCrCu0.5 high entropy alloy (HEA) was fabricated successfully from elemental powder blends through a Laser Melting Deposition (LMD) process. The structural characteristics and tensile properties of the alloy have been studied by XRD, optical microscope (OM), scanning electron microscope (SEM), transmission electron microscope (TEM), and tensile test. The alloy consists of (FCC1 + FCC2 + BCC) phases with lattice parameters of 3.62 A, 3.58 A and 2.85 A, respectively. The yield strength, tensile strength and elongation of LAM Al0.25FeMnNiCrCu0.5 at room temperature are 636 MPa, 1052 MPa and 24.5%, respectively. The LMD Al0.25FeMnNiCrCu0.5 alloy presents an outstanding combination of high tensile strength and good ductility.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
2. Murty · 2014
3. Effects of Al addition on structural evolution and tensile properties of the FeCoNiCrMn high-entropy alloy system10.1016/j.actamat.2013.09.037 ↗
4. Mechanical performance of the AlxCoCrCuFeNi high-entropy alloy system with multiprincipal elements10.1007/s11661-005-0218-9 ↗
5. Corrosion behavior of CuCrFeNiMn high entropy alloy system in 1M sulfuric acid solution
6. High-entropy alloys with high saturation magnetization, electrical resistivity and malleability
7. Microstructure, mechanical properties, and oxidation behavior of AlxCr0.4CuFe0.4MnNi high entropy alloys10.1002/adem.201600726 ↗
8. Materials and manufacturing renaissance: additive manufacturing of high-entropy alloys10.1557/jmr.2020.140 ↗
9. Additive manufacturing of high entropy alloys: a practical review10.1016/j.jmst.2020.11.029 ↗
10. Microstructures and mechanical properties of Ti6Al4V-Ti48Al2Cr2Nb alloys fabricated by laser melting deposition of powder mixtures10.1016/j.matchar.2020.110321 ↗
11. CoCrFeNiMo0.2 high entropy alloy by laser melting deposition: prospective material for low temperature and corrosion resistant applications10.1016/j.intermet.2020.106727 ↗
12. Grain morphology evolution behavior of titanium alloy components during laser melting deposition additive manufacturing10.1016/j.jallcom.2015.01.256 ↗
13. Combining thermodynamic modeling and 3D printing of elemental powder blends for high-throughput investigation of high-entropy alloys – toward rapid alloy screening and design10.1016/j.msea.2017.01.099 ↗
14. Hierarchical microstructure and strengthening mechanisms of a CoCrFeNiMn high entropy alloy additively manufactured by selective laser melting10.1016/j.scriptamat.2018.05.015 ↗
15. Selective laser melting of an equiatomic CoCrFeMnNi high-entropy alloy: Processability, non-equilibrium microstructure and mechanical property10.1016/j.jallcom.2018.02.298 ↗
16. Microstructures and mechanical properties of CrMnFeCoNi high entropy alloys fabricated using laser metal deposition technique10.1016/j.jallcom.2018.09.235 ↗
17. Microstructure evolution and mechanical properties of Al CoCrFeNi high-entropy alloys by laser melting deposition10.1016/j.vacuum.2020.109875 ↗
18. Selective laser melting of an equiatomic AlCrCuFeNi high-entropy alloy: Processability, non-equilibrium microstructure and mechanical behavior10.1016/j.jallcom.2018.08.290 ↗
19. Science and technology in high-entropy alloys10.1007/s40843-017-9195-8 ↗
20. A precipitation-hardened high-entropy alloy with outstanding tensile properties10.1016/j.actamat.2015.08.076 ↗
21. A new pseudo binary strategy to design eutectic high entropy alloys using mixing enthalpy and valence electron concentration10.1016/j.matdes.2018.01.057 ↗
22. Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys10.1063/1.3587228 ↗
23. Microstructure characterization of AlxCoCrCuFeNi high-entropy alloy system with multiprincipal elements10.1007/s11661-005-0283-0 ↗
24. Laser metal deposition of compositionally grade TiZrNbTa refractory high-entropy alloys using elemental powder blends
25. Nature of the interfaces between in the constituent phases in the high entropy alloy CoCrCuFeNiAl10.1016/j.ultramic.2013.06.006 ↗
26. Comparative study of the microstructures and mechanical properties of direct laser fabricated and arc-melted AlxCoCrFeNi high entropy alloys10.1016/j.msea.2015.02.072 ↗
27. Evolution of microstructure, mechanical and corrosion properties of AlCoCrFeNi high-entropy alloy prepared by direct laser fabrication10.1016/j.jallcom.2016.10.138 ↗
28. Selective electron beam melting of Al0.5CrMoNbTa0.5 high entropy alloys using elemental powder blend10.1016/j.heliyon.2019.e01188 ↗
29. Microstructure and aging behaviour of Al5Cr32Fe35Ni22Ti6 high entropy alloy10.1179/1743284715Y.0000000025 ↗
30. Effects of Al addition on microstructures and mechanical properties of CoCrFeMnNiAlx high entropy alloy films
31. Effect of the substitution of Co by Mn in Al-Cr-Cu-Fe-Co-Ni high-entropy alloys10.3166/acsm.31.685-698 ↗
32. Solidification and solid-state transformation sciences in metals additive manufacturing10.1016/j.scriptamat.2017.01.005 ↗
33. Laser 3D printing of the CoCrFeMnNi high-entropy alloy10.1016/j.matlet.2018.10.084 ↗
34. Selective laser melting of dual phase AlCrCuFeNix high entropy alloys: formability, heterogeneous microstructures and deformation mechanisms
35. A novel Fe20Co20Ni41Al19 eutectic high entropy alloy with excellent tensile properties10.1016/j.matlet.2018.01.017 ↗
36. A Promising new class of high-temperature alloys: eutectic high-entropy alloys10.1038/srep06200 ↗
37. Heterogeneous materials: a new class of materials with unprecedented mechanical properties10.1080/21663831.2017.1343208 ↗
38. Enhancement of strength-ductility trade-off in a high-entropy alloy through a heterogeneous structure10.1016/j.actamat.2018.12.012 ↗